man lvcreate () - create a logical volume in an existing volume group

NAME

lvcreate - create a logical volume in an existing volume group

SYNOPSIS

lvcreate [-A|--autobackup {y|n}] [-C|--contiguous {y|n}] [-d|--debug] [-h|--help] [-i|--stripes StripesI] [-I|--stripesize StripeSizeI]] {-l|--extents LogicalExtentsNumber| -L|--size LogicalVolumeSize[kKmMgGtT]} [-n|--name LogicalVolumeName] [-p|--permission{r|rw}] [-r|--readahead ReadAheadSectors] [-v|--verbose][-Z|--zero{y|n}] VolumeGroupName [PhysicalVolumePath...]



lvcreate {-l/--extents LogicalExtentsNumber | -L/--size LogicalVolumeSize[kKmMgGtT]} [-c/--chunksize ChunkSize] -s/--snapshot -n/--name SnapshotLogicalVolumeName OriginalLogicalVolumePath [PhysicalVolumePath...]

DESCRIPTION

lvcreate creates a new logical volume in a volume group ( see vgcreate(8), vgchange(8) ) by allocating logical extents from the free physical extent pool of that volume group. If there are not enough free physical extents then the volume group can be extended ( see vgextend(8) ) with other physical volumes or by reducing existing logical volumes of this volume group in size ( see lvreduce(8), e2fsadm(8) ).

The second form supports the creation of snapshot logical volumes which keep the contents of the original logical volume for backup purposes.

OPTIONS

-A, --autobackup {y|n}
Controls automatic backup of VG metadata after the change ( see vgcfgbackup(8) ).

Default is yes.
-c, --chunksize ChunkSize
Power of 2 chunk size for the snapshot logical volume between 4k and 1024k.
-C, --contiguous y/n
Sets or resets the contiguous allocation policy for logical volumes. Default is no contiguous allocation based on a next free principle.
-d, --debug
Enables additional debugging output (if compiled with DEBUG).
-h, --help
Print a usage message on standard output and exit successfully.
-i, --stripes Stripes
Gives the number of stripes. This is equal to the number of physical volumes to scatter the logical volume.
-I, --stripesize StripeSize
Gives the number of kilobytes for the granularity of the stripes.

StripeSize must be 2^n (n = 2 to 9)
-l, --extents LogicalExtentsNumber
Gives the number of logical extents to allocate for the new logical volume.
-L, --size LogicalVolumeSize[kKmMgGtT]
Gives the size to allocate for the new logical volume. A size suffix of K for kilobytes, M for megabytes, G for gigabytes or T for terabytes is optional.

Default unit is megabytes.
-n, --name LogicalVolumeName
The name for the new logical volume.

Without this option a default names of "lvol#" will be generated where # is the LVM internal number of the logical volume.
-p, --permission r/w
Set access permissions to read only or read and write.

Default is read and write.
-r, --readahead ReadAheadSectors
Set read ahead sector count of this logical volume to a value between 2 and 120.
-s, --snapshot
Create a snapshot logical volume (or snapshot) for an existing, so called original logical volume (or origin). Snapshots provide a 'frozen image' of the contents of the origin while the origin can still be updated. They enable consistent backups and online recovery of removed/overwritten data/files. The snapshot does not need the same amount of storage the origin has. In a typical scenario, 15-20% might be enough. In case the snapshot runs out of storage, use lvextend(8) to grow it. Shrinking a snapshot is supported by lvreduce(8) as well. Run lvdisplay(8) on the snapshot in order to check how much data is allocated to it.
-v, --verbose
Gives verbose information about lvcreate's activities.
-Z, --zero y/n
Controls zeroing of the first KB of data in the new logical volume.

Default is yes.


Warning: trying to mount an unzeroed logical volume can cause the system to hang.

Examples

"lvcreate -i 3 -I 8 -L 100 vg00" tries to create a striped logical volume with 3 stripes, a stripesize of 8KB and a size of 100MB in the volume group named vg00. The logical volume name will be chosen by lvcreate.

"lvcreate --size 100m --snapshot --name snap /dev/vg00/lvol1"

creates a snapshot logical volume named /dev/vg00/snap which has access to the contents of the original logical volume named /dev/vg00/lvol1 at snapshot logical volume creation time. If the original logical volume contains a file system, you can mount the snapshot logical volume on an arbitrary directory in order to access the contents of the filesystem to run a backup while the original filesystem is updated.

DIAGNOSTICS

lvcreate returns an exit code of 0 for success or > 0 for error:

1 invalid volume group name 2 error checking existence of volume group 3 volume group inactive 4 invalid logical volume name 5 error getting status of logical volume 6 error checking existence of logical volume 7 invalid physical volume name 8 invalid number of physical volumes 9 invalid number of stripes 10 invalid stripe size 11 error getting status of volume group 12 invalid logical volume size 13 invalid number of free physical extents 14 more stripes than physical volumes requested 15 error reading VGDA 16 requested physical volume not in volume group 17 error reading physical volume 18 maximum number of logical volumes exceeded 19 not enoungh space available to create logical volume 20 error setting up VGDA for logical volume creation 21 error creating VGDA for logical volume in kernel 22 error writing VGDA to physical volume(s) 23 error creating device special for logical volume 24 error opening logical volume 25 error writing to logical volume 26 invalid read ahead sector count 27 no free logical volume manager block specials available 28 invalid snapshot logical volume name 29 error setting up snapshot copy on write exception table 30 error initializing snapshot copy on write exception table on disk 31 error getting status of logical volume from kernel 32 snapshot already exists

95 driver/module not in kernel 96 invalid I/O protocol version 97 error locking logical volume manager 98 invalid lvmtab (run vgscan(8)) 99 invalid command line

ENVIRONMENT VARIABLES

LVM_AUTOBACKUP
If this variable is set to "no" then the automatic backup of VG metadata is turned off.
LVM_VG_MAX_BACKUPS
This variable determines the backup history depth of kept VGDA copy files in /etc/lvmconf. It can be set to a positive number between 0 and 999. The higher this number is, the more changes you can restore using vgcfgrestore(8).
LVM_VG_NAME
The default Volume Group Name to use. Setting this variable enables you to enter just the Logical Volume Name rather than its complete path.

See also

AUTHOR

Heinz Mauelshagen <Linux-LVM@Sistina.com>