Empty line, ignored. Useful for structuring documents. Complete line is a comment. Print string on standard error, exit program. Begin line adjustment for output lines in current adjust mode. Start line adjustment in mode c (CI]c]CR][eq]l,r,b,n]). Assign format c to register (CI]c]CR][eq]l,i,I,a,A]). Create alias name for register. Create alias name for request, string, macro, or diversion object. Append to macro until .. is encountered. Append to macro until is called. Append to a macro whose name is contained in the string register macro until .. is encountered. Append to a macro indirectly. macro and end are string registers whose contents are interpolated for the macro name and the end macro, respectively. Same as but with compatibility mode switched off during macro expansion. Same as but with compatibility mode switched off during macro expansion. Append anything to stringvar. Unformat ASCII characters, spaces, and some escape sequences in diversion. Same as but with compatibility mode switched off during string expansion. Print a backtrace of the input on stderr. Embolden font by N-1 units. Embolden Special Font S when current font is font. Unset the blank line macro. Set the blank line macro to macro. End current diversion. Divert to macro, omitting a partially filled line. End current diversion. Divert and append to macro, omitting a partially filled line. Eject current page and begin new page. Eject current page; next page number [+-]N. Line break. Break and spread output line. Same as Break out of a while loop. Reset no-break control character to Set no-break control character to c. Reset control character to Set control character to c. Center the next input line. Center following N input lines. Copy contents of file filename unprocessed to stdout or to the diversion. Treat characters c1, c2, ... according to mode number. Change trap location to N . Define character c as string anything. Chop the last character off macro, string, or diversion object. Close the stream. Enable colors. If N is zero disable colors, otherwise enable them. Finish the current iteration of a while loop. Enable compatibility mode. If N is zero disable compatibility mode, otherwise enable it. Set constant character width mode for font to N/36 ems with em M. Continuous underline in nroff, like in troff. End current diversion. Divert and append to macro. Define or redefine macro until .. is encountered. Define or redefine macro until is called. Same as but with compatibility mode switched off during macro expansion. Same as but with compatibility mode switched off during macro expansion. Define or redefine a color with name color. scheme can be rgb, cym, cymk, gray, or grey. component can be single components specified as fractions in the range 0 to 1 (default scaling indicator~c as a string of two-digit hexadecimal color components with a leading #, or as a string of four-digit hexadecimal components with two leading #. The color default can't be redefined. Define or redefine a macro whose name is contained in the string register macro until .. is encountered. Define or redefine a macro indirectly. macro and end are string registers whose contents are interpolated for the macro name and the end macro, respectively. End current diversion. Divert to macro . Interpret with compatibility mode disabled. Set stringvar to anything. Same as but with compatibility mode switched off during string expansion. Set diversion trap to position N (default scaling indicator~c Reset escape character to Set escape character to c. Restore escape character saved with Save current escape character. Else part for if-else (c request. The macro will be run after the end of input. Turn off escape character mechanism. Switch to previous environment. Push down environment number or name env and switch to it. Copy the contents of environment env to the current environment. No pushing or popping. Exit from roff processing. Return to previous font family. Set the current font family to name. Disable field mechanism. Set field delimiter to a and pad character to space. Set field delimiter to a and pad character to b. Define fallback character c as string anything. Fill output lines. Flush output buffer. Mount font on position n. Mount font with long external name to short internal name on position n. When the current font is font, then the fonts s1, s2, ... will be special. Return to previous font. Same as or Change to font name or number font; same as escape sequence. Translate font1 to font2. Remove additional hyphenation indicator character. Set up additional hyphenation indicator character~c c. Set the hyphenation code of character c1 to code1, that of c2 to code2, etc. Set the current hyphenation language to lang. Set the maximum number of consecutive hyphenated lines to n. Read hyphenation patterns from file. Append hyphenation patterns from file. Set input mapping for List of words with exceptional hyphenation. Switch to hyphenation mode N. Set the hyphenation margin to n (default scaling indicator~c Set the hyphenation space to n. If cond then anything else goto If cond then anything; otherwise do nothing. Ignore text until .. is encountered. Ignore text until Change to previous indent value. Change indent according to [+-]N (default scaling indicator~c Set an input-line count trap for the next N lines. Same as but count lines interrupted with as one line. Enable pairwise kerning. If n is zero, disable pairwise kerning, otherwise enable it. Remove leader repetition character. Set leader repetition character to~c c. Write the length of the string anything in register. Enable line-tabs mode (i.e., calculate tab positions relative to output line). If n is zero, disable line-tabs mode, otherwise enable it. Set input line number to N and filename to file. Ligature mode on if N>0. Change to previous line length. Set line length according to [+-]N (default size default scaling indicator~c Change to the previous value of additional intra-line skip. Set additional intra-line skip value to N, i.e., N-1 blank lines are inserted after each text output line. Length of title (default scaling indicator~c Margin character off. Print character c after each text line at actual distance from right margin. Set margin character to c and distance to N from right margin (default scaling indicator~c Mark current vertical position in register. The same as the .so request except that file is searched in the tmac directories. No output-line adjusting. Need a one-line vertical space. Need N vertical space (default scaling indicator~c No filling or adjusting of output-lines. No hyphenation. Number mode off. In line number mode, set number, multiple, spacing, and indent. Do not number next line. Do not number next N lines. Always execute anything. Define or modify register using [+-]N with auto-increment M. Make the built-in condition n true and t false. Turn no-space mode on. Immediately jump to end of current file. Next file. Open for writing and associate the stream named with it. Like but append to it. Output vertical distance that was saved by the request. Emit string directly to intermediate output, allowing leading whitespace if string starts with (which will be stripped off). Reset page number character to~c Page number character. Pipe output to program (nroff only). Set page length to default The current page length is stored in Change page length to [+-]N (default scaling indicator~c Print macro names and sizes (number of blocks of 128 bytes). Print only total of sizes of macros (number of 128 bytes blocks). Next page number N. Print the names and contents of all currently defined number registers on stderr. Change to previous page offset. The current page offset is available in Page offset N. Return to previous point-size. Point size; same as Get the bounding box of a PostScript image filename. This behaves like the request except that input comes from the standard output of command. Print the names and positions of all traps (not including input line traps and diversion traps) on stderr. Change to previous post-vertical line spacing. Change post-vertical line spacing according to [+-]N (default scaling indicator~c Remove the definitions of characters c1, c2, ... Read insertion. Return from a macro. Right justify the next n input lines. Remove request, macro, or string name. Rename request, macro, or string old to new. Rename register reg1 to reg2. Remove register. Restore spacing; turn no-space mode off. Return (upward only) to marked vertical place (default scaling indicator~c Reset soft hyphen character to Set the soft hyphen character to c. In a macro, shift the arguments by n~c positions. Set available font sizes similar to the sizes command in a DESC file. Include source file. Skip one line vertically. Space vertical distance N up or down according to sign of N (default scaling indicator~c Fonts s1, s2, etc. are special and will be searched for characters not in the current font. Toggle the spread warning on and off without changing its value. Emit a warning if each space in an output line is widened by limit or more (default scaling indicator~c Space-character size set to N/12 of the spacewidth in the current font. Space-character size set to N/12 and sentence space size set to M/12 of the spacewidth in the current font (CR][eq]1/3 em]). Associate style with font position n. Replace the string named xx with the substring defined by the indices n1 and n2. Save of vertical space. Save the vertical distance N for later output with request. Execute program command-line. Set tabs after every position that is a multiple of N (default scaling indicator~c Set tabs at positions n1, n2, nn, then set tabs at nn+r1, nn+r2, nn+rn, then at nn+rn+r1, nn+rn+r2, nn+rn+rn, and so on. Remove tab repition character. Set tab repetition character to~c c. Temporary indent next line (default scaling indicator~c Enable track kerning for font. Three-part title. Print anything on terminal (UNIX standard message output). Print anything on terminal (UNIX standard message output), allowing leading whitespace if anything starts with (which will be stripped off). Similar to without emitting a final newline. Translate a to b, c to d, etc. on output. Transparently output the contents of file filename. This is the same as the request except that the asciify request will use the character code (if any) before the character translation. This is the same as the request except that the translations do not apply to text that is transparently throughput into a diversion with Make the built-in condition t true and n false. Underline font set to font (to be switched to by Underline (italicize in troff) N input lines. Unformat space characters and tabs, preserving font information in diversion. Enable vertical position traps if n is non-zero, disable them otherwise. Change to previous vertical base line spacing. Set vertical base line spacing according to [+-]N (default scaling indicator~c Default value is Set warnings code to n. Set scaling indicator used in warnings to si. Remove (first) trap at position N. Set location trap; negative means from page bottom. While condition cond is true, accept anything as input. Write anything to the stream named stream. Similar to without emitting a final newline. Write contents of macro or string xx to the stream named stream.

Besides these standard groff requests, there might be further macro calls. They can originate from a macro package (see roff(7) for an overview) or from a preprocessor.

Preprocessor macros are easy to be recognized. They enclose their code into a pair of characteristic macros.

box, center, tab (@); c | c | c CfCB | CfCB | CfCB. preprocessor@start macro@ end macro = eqn@.PS@.PE grap@.G1@.G2 grn@.GS@.GE pic@.PS@.PE refer@.R1@.R2 soelim@I]none@I]none tbl@.TS@.TE

Beginning of a comment. Everything up to the end of the line is ignored. Everything up to and including the next newline is ignored. This is interpreted in copy mode. This is like except that the terminating newline is ignored as well. The string stored in the string variable with 1-character name s. The string stored in the string variable with 2-character name st. The string stored in the string variable with arbitrary length name stringvar, taking arg1, arg2, ... as arguments. The name by which the current macro was invoked. The request can make a macro have more than one name. Macro or string argument with 1-place number x, where x is a digit between 1 and 9. Macro or string argument with 2-digit number xy. Macro or string argument with number nexp, where nexp is a numerical expression evaluating to an integer [>=]1. In a macro or string, the concatenation of all the arguments separated by spaces. In a macro or string, the concatenation of all the arguments with each surrounded by double quotes, and separated by spaces. reduces to a single backslash; useful to delay its interpretation as escape character in copy mode. For a printable backslash, use or even better to be independent from the current escape character. The acute accent [aa]; same as Unescaped: apostrophe, right quotation mark, single quote (ASCII 0x27). The grave accent [ga]; same as Unescaped: left quote, backquote (ASCII 0x60). The - sign in the current font. An uninterpreted dot (period), even at start of line. Default optional hyphenation character. Transparent line indicator. In a diversion, this will transparently embed anything in the diversion. anything is read in copy mode. See also the escape sequences and Unpaddable space-size space character (no line break). Digit width. 1/6 em narrow space character; zero width in nroff. 1/12 em half-narrow space character; zero width in nroff. Non-printable, zero width character. Like except that it behaves like a character declared with the cflags request to be transparent for the purposes of end of sentence recognition. Increases the width of the preceding character so that the spacing between that character and the following character will be correct if the following character is a roman character. Modifies the spacing of the following character so that the spacing between that character and the preceding character will correct if the preceding character is a roman character. Unbreakable space that stretches like a normal inter-word space when a line is adjusted. Inserts a zero-width break point (similar to but without a soft hyphen character). Ignored newline, for continuation lines. Begin conditional input. End conditional input. The special character with 2-character name sc, see section Special Characters. The named character with arbitrary length name name. Non-interpreted leader character. If anything is acceptable as a name of a string, macro, diversion, register, environment or font it expands to~1, and to~0 otherwise. Bracket building function. If anything is acceptable as a valid numeric expression it expands to~1, and to~0 otherwise. Interrupt text processing. The character called char; same as but compatible to other roff versions. Forward (down) 1/2 em vertical unit (1/2 line in nroff). Draw a graphical element defined by the characters in charseq; see groff info file for details. Printable version of the current escape character. Equivalent to an escape character, but is not interpreted in copy-mode. Change to font with 1-character name or 1-digit number F. Switch back to previous font. Change to font with 2-character name or 2-digit number fo. Change to font with arbitrary length name or number expression font. Switch back to previous font. Change to font family with 1-character name f. Change to font family with 2-character name fm. Change to font family with arbitrary length name fam. Switch back to previous font family. Return format of register with name reg suitable for Alternative forms and Local horizontal motion; move right N (left if negative). Set height of current font to N. Mark horizontal input place in register with arbitrary length name reg. Alternative forms and Horizontal line drawing function (optionally using character c). Vertical line drawing function (optionally using character c). Change to color color. Alternative forms and Switch back to previous color. Change filling color for closed drawn objects to color color. Alternative forms and Switch to previous fill color. The numerical value stored in the register variable with the 1-character name r. The numerical value stored in the register variable with the 2-character name re. The numerical value stored in the register variable with arbitrary length name reg. Typeset the character with code n in the current font, no special fonts are searched. Useful for adding characters to a font using the request. Overstrike characters a, b, c, etc. Disable glyph output. Mainly for internal use. Enable glyph output. Mainly for internal use. Break and spread output line. Reverse 1 em vertical motion (reverse line in nroff). The same as name [+-]n. Set the point size to N scaled points. Note the alternative forms [rs]s[+-][N]c , [rs]s'[+-]N'c [rs]s[+-]'N'c [rs]s[+-](xyc Same as request. Slant output N degrees. Non-interpreted horizontal tab. Reverse (up) 1/2 em vertical motion (1/2 line in nroff). Local vertical motion; move down N (up if negative). The contents of the environment variable env. Alternative forms and The width of the character sequence string. Extra line-space function (negative before, positive after). Output string as device control function. Output string variable or macro name uninterpreted as device control function. Alternative forms and Print c with zero width (without spacing). Print anything and then restore the horizontal and vertical position; anything may not contain tabs or leaders.

The escape sequences and are interpreted in copy mode.

Escape sequences starting with or do not represent single character escape sequences, but introduce escape names with two or more characters.

If a backslash is followed by a character that does not constitute a defined escape sequence the backslash is silently ignored and the character maps to itself.

Common special characters are predefined by escape sequences of the form [rs](xy with characters x and y. Some of these exist in the usual font while most of them are only available in the special font. Below you'll find a selection of the most important glyphs; a complete list can be found in groff_char(7).

Bullet sign Copyright Cent Double dagger Degree Dagger Printable double quote Em-dash Hyphen Registered sign Printable backslash character Section sign Underline character Identical Larger or equal Less or equal Not equal Right arrow Left arrow Plus-minus sign

Strings are defined by the request and can be retrieved by the escape sequence.

Strings share their name space with macros. So strings and macros without arguments are roughly equivalent; it is possible to call a string like a macro and vice-versa, but this often leads to unpredictable results. The following strings are predefined in groff. The name of the current output device as specified by the command line option.

The following registers have predefined values that should not be modified by the user (usually, registers starting with a dot a read-only). Mostly, they provide information on the current settings or store results from request calls.

Number of arguments in the current macro or string. Post-line extra line-space most recently utilized using Set to~1 in troff if option -A is used; always~1 in nroff. Current input line number. 1~if compatibility mode is in effect, 0~otherwise. The depth of the last character added to the current environment. It is positive if the character extends below the baseline. The number of lines remaining to be centered, as set by the request. The height of the last character added to the current environment. It is positive if the character extends above the baseline. 1~if colors are enabled, 0~otherwise. The skew of the last character added to the current environment. The skew of a character is how far to the right of the center of a character the center of an accent over that character should be placed. Current vertical place in current diversion; equal to register The name or number of the current environment (string-valued). Current font number. The current font family (string-valued). The current (internal) real font name (string-valued). The number of the next free font position. Always 1 in GNU troff. Macros should use it to test if running under groff. Text base-line high-water mark on current page or diversion. Available horizontal resolution in basic units. The current hyphenation language as set by the .hla request. The number of immediately preceding consecutive hyphenated lines. The maximum allowed number of consecutive hyphenated lines, as set by the request. The current hyphenation flags (as set by the request). The current hyphenation margin (as set by the request). The current hyphenation space (as set by the request). Current ident. The indent that applies to the current output line. Positive if last output line contains 1~if pairwise kerning is enabled, 0~otherwise. Current line length. The current ligature mode (as set by the request). The current line-tabs mode (as set by the request). The line length that applies to the current output line. The title length (as set by the request). Length of text portion on previous output line. The amount of space that was needed in the last request that caused a trap to be sprung. Useful in conjunction with 1~if in no-space mode, 0~otherwise. Current page offset. Current page length. The number of the next page: either the value set by a request, or the number of the current page plus 1. The current pointsize in scaled points. The last-requested pointsize in scaled points. The current post-vertical line spacing. The number of lines to be right-justified as set by the rj request. Current point size as a decimal fraction. The last requested pointsize in points as a decimal fraction (string-valued). Distance to the next trap. Set to~1 if option -T is used. A string representation of the current tab settings suitable for use as an argument to the request. The amount of vertical space truncated by the most recently sprung vertical position trap, or, if the trap was sprung by a request, minus the amount of vertical motion produced by In other words, at the point a trap is sprung, it represents the difference of what the vertical position would have been but for the trap, and what the vertical position actually is. Useful in conjunction with the register. The value of the parameters set by the first argument of the request. The value of the parameters set by the second argument of the request. Equal to 1 bin fill mode and 0 in nofill mode. Current vertical line spacing. Available vertical resolution in basic units. 1~ if vertical position traps are enabled, 0~otherwise. Width of previous character. The sum of the number codes of the currently enabled warnings. The major version number. The minor version number. The revision number of groff. Name of current diversion.

The following registers can be read and written by the user. They have predefined default values, but these can be modified for customizing a document.

Current page number. Current input line number. Character type (set by width function Maximal width of last completed diversion. Height of last completed diversion. Current day of week (1-7). Current day of month (1-31). The number of hours past midnight. Initialized at start-up. Current horizontal position at input line. Lower left x-coordinate (in PostScript units) of a given PostScript image (set by Lower left y-coordinate (in PostScript units) of a given PostScript image (set by Output line number. The number of minutes after the hour. Initialized at start-up. Current month (1-12). Vertical position of last printed text base-line. Like but takes account of the heights and depths of characters. Like but takes account of the heights and depths of characters. Depth of string below base line (generated by width function The number of seconds after the minute. Initialized at start-up. Right skip width from the center of the last character in the argument. If greater than 0, the maximum number of objects on the input stack. If [<=]0 there is no limit, i.e., recursion can continue until virtual memory is exhausted. The amount of horizontal space (possibly negative) that should be added to the last character before a subscript (generated by width function Height of string above base line (generated by width function The return value of the system() function executed by the last request. Upper right x-coordinate (in PostScript units) of a given PostScript image (set by Upper right y-coordinate (in PostScript units) of a given PostScript image (set by The current year (year 2000 compliant). Current year minus 1900. For Y2K compliance use register instead.