man 3c515-diag (Administration système) - setup and diagnostic program for the 3Com 3c515 Ethernet cards.

NAME

3c515-diag - setup and diagnostic program for the 3Com 3c515 Ethernet cards.

3c515-diag [options]

3c515-diag is a program that you can use to diagnose problems with 3Com 3c515 ethercards as well as reconfiguring it.

These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.

-h, --help: Show summary of options.
-V, --version: Show version of program.
-v, --verbose: Verbose mode.
-q, --quiet: Be very unverbose.
-a, --all: Print all registers.
-p, --base-address <port>: Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360
-f, --interface <interface>: Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs AUI.
-Q, -i, --irq <irq>: Specify new interrupt. Valid values are: 3-5,7,9-15.
-w, --write-EEPROM <values>: Write to the EEPROMS with the specified values.

This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).