axctl - Configure/Kill running AX.25 connections.

axctl [-v] port dest src -window|-t1|-t2|-t3|-n2|-idle|-paclen|-kill [parm]

The axctl command is designed to be a multi-function command that allows miscellaneous commands to be issued to the Linux AX.25 protocol layer for existing AX.25 connections. The connection is uniquely identified via the combination of port, destination callsign and source callsign, with that information the kernel is able to change the parameters, or abort the connection.

Many of the options are similar to those found in axparms and perform the same function. Only one parameter may be changed on each invokation of axctl.

-v

Displays the version number.

-window window

Sets the window size for the AX.25 connection.

-t1 t1-timeout

Sets the initial T1 timeout value for the AX.25 connection, the value is given in seconds.

-t2 t2-timeout

Sets the T2 timeout value for the AX.25 connection, the value is given in seconds.

-t3 t3-timeout

Sets the T3 timeout value for the AX.25 connected, the value is given in seconds.

-n2 n2-count

Sets the maximum number of tries for the AX.25 connection.

-idle idle-timeout

Sets the value for the idle timer for the AX.25 connection, the value is in minutes.

-paclen paclength

Sets the maximum packet length that may be transmitted on the AX.25 connection.

-kill

Will abort an existing AX.25 connection.

/etc/ax25/axports

call(1), getsockopt(2), setsockopt(2), ax25(4), axparms(8), axports(5).

Joerg Reuter DL1BKE <jreuter@poboxes.com>