man lpadmin (Administration système) - configure cups printers and classes

NAME

lpadmin - configure cups printers and classes

SYNOPSIS

lpadmin [ -E ] [-U username ] [ -h server[:port] ] -d destination

lpadmin [ -E ] [-U username ] [ -h server[:port] ] -p printer option(s)

lpadmin [ -E ] [-U username ] [ -h server[:port] ] -x destination

DESCRIPTION

lpadmin configures printer and class queues provided by CUPS. It can also be used to set the server default printer or class.

When specified before the -d, -p, or -x options, the -E option forces encryption when connecting to the server.

The first form of the command (-d) sets the default printer or class to destination. Subsequent print jobs submitted via the lp(1) or lpr(1) commands will use this destination unless the user specifies otherwise with the lpoptions(1) command.

The second form of the command (-p) configures the named printer. The additional options are described below.

The third form of the command (-x) deletes the printer or class destination. Any jobs that are pending for the destination will be removed and any job that is currently printed will be aborted.

CONFIGURATION OPTIONS

The following options are recognized when configuring a printer queue:

-c class


Adds the named printer to class. If class does not exist it is created automatically.
-i interface


Sets a System V style interface script for the printer. This option cannot be specified with the -P option (PPD file) and is intended for providing support for legacy printer drivers.
-m model


Sets a standard System V interface script or PPD file from the model directory.
-o name=value


Sets a PPD or server option for the printer. PPD options can be listed using the -l option with the lpoptions(1) command.
-o job-k-limit=value


Sets the kilobyte limit for per-user quotas. The value is an integer number of kilobytes; one kilobyte is 1024 bytes.
-o job-page-limit=value


Sets the page limit for per-user quotas. The value is the integer number of pages that can be printed; double-sided pages are counted as two pages.
-o job-quota-period=value


Sets the accounting period for per-user quotas. The value is an integer number of seconds; 86,400 seconds are in one day.
-o job-sheets-default=banner
-o job-sheets-default=banner,banner


Sets the default banner page(s) to use for print jobs.
-o port-monitor=name


Sets the binary communications program to use when printing, "none", "bcp", or "tbcp". The default program is "none".
-o printer-error-policy=name


Sets the error policy to be used when the printer backend is unable to send the job to the printer. The name must be one of "cancel-job", "retry-job" or "stop-printer". The default error policy is "stop-printer".
-o printer-is-shared=true/false


Sets the printer to shared/published or unshared/unpublished. Shared/published printers are publically announced by the server on the LAN based on the browsing configuration in cupsd.conf, while unshared/unpublished printers are not announced. The default value is "true".
-o printer-op-policy=name


Sets the IPP operation policy associated with the printer. The name must be defined in the cupsd.conf in a Policy section. The default operation policy is "default".
-r class


Removes the named printer from class. If the resulting class becomes empty it is removed.
-u allow:user,user,@group
-u deny:user,user,@group
-u allow:all
-u deny:none


Sets user-level access control on a printer. Names starting with "@" are interpreted as UNIX groups. The latter two forms turn user-level access control off.
-v "device-uri"


Sets the device-uri attribute of the printer queue. If device-uri is a filename it is automatically converted to the form file:///file/name. Use the lpinfo(8) command to get a list of supported device URIs and schemes.
-D "info"


Provides a textual description of the printer.
-E


Enables the printer and accepts jobs; this is the same as running the accept(8) and cupsenable(8) programs on the printer.
-L "location"


Provides a textual location of the printer.
-P ppd-file


Specifies a PostScript Printer Description file to use with the printer. If specified, this option overrides the -i option (interface script).

COMPATIBILITY

Unlike the System V printing system, CUPS allows printer names to contain any printable character except SPACE, TAB, "/", or "#". Also, printer and class names are not case-sensitive. Finally, the CUPS version of lpadmin may ask the user for an access password depending on the printing system configuration. This differs from the System V version which requires the root user to execute this command.

LIMITATIONS

The CUPS version of lpadmin does not support all of the System V or Solaris printing system configuration options.

SEE ALSO

accept(8), cupsenable(8), lpinfo(8), lpoptions(1),

http://localhost:631/help

COPYRIGHT

Copyright 1997-2006 by Easy Software Products, All Rights Reserved.