man safenet (Administration système) - Driver for SafeNet compatible UPS equipment

NAME

safenet - Driver for SafeNet compatible UPS equipment

This man page only documents the hardwarespecific features of the safenet driver. For information about the core driver, see nutupsdrv(8).

This driver supports UPS equipment which can be controlled via SafeNet v1.0 for Windows (serial interface only).

This driver supports the following optional settings in the ups.conf(5):

manufacturer=value: Autodetection of this parameter is not possible yet (and it probably never will be). Therefor this user defined string accepts any name. The default is unknown.
modelname=value: Like manufacturer above. The default is unknown.
serialnumber=value: Like manufacturer above. The default is unknown.

test.battery.start Start UPS self test

test.battery.stop Cancel UPS self test

test.failure.start Start simulated power failure

test.failure.stop Cancel simulated power failure

beeper.on Enable UPS beeper

beeper.off Disable UPS beeper

shutdown.return Shut down in 1 second and wait for power to return

shutdown.reboot Shut down in 1 seconds and reboot after 1 minute

shutdown.reboot.graceful Shut down in 20 seconds and reboot after 1 minute

Arjen de Korte <arjen@dekorte.org>