sysv-rc-conf - Run-level configuration for SysV like init script links

sysv-rc-conf [ options ]

sysv-rc-conf --list [ service ]

sysv-rc-conf [ --level levels ] service <on|off>

sysv-rc-conf gives an easy to use interface for managing CW/etc/rc{runlevel}.d/ symlinks. The interface comes in two different flavors, one that simply allows turning services on or off and another that allows for more fine tuned management of the symlinks. It's a replacement for programs like BIntsysv(8) or BIrcconf(8).

sysv-rc-conf can also be used at the command line when the desired changes to the symlinks are already known. The syntax is borrowed from BIchkconfig(8), although it does not follow it exactly.

-c DIRECTORY, --cache=DIRECTORY

The directory where the priority numbers, old runlevel configuration, etc. should be stored. This defaults to CW/var/lib/sysv-rc-conf. See the FILES section below and the --Purge option.

-r DIRECTORY, --root=DIRECTORY

The root directory to use. This defaults to CW/. This comes in handy if the root file system is mounted somewhere else, such as when using a rescue disk.

-P, --Purge

Purge the information stored in the cache file. See the FILES section below and the --cache option.

-v FILE, --verbose=FILE

Print verbose information to CWFILE

-V, --Version

Print version information to STDOUT and exit

-o [ see description ], --order=[ see description ]

Allows various sorting orders and ways to display the rows. The argument can be made up of any of the following:

a

Sort the rows alphabetically. This is the default if the -o option isn't specified.

n

Show the priority numbers along with the name of the service.

p

Sorts by the priority numbers.

level

level can be any runlevel, 0-9 or S. This controls which runlevel the priority numbers are sorted at. It only makes sense to use this in conjuntion with p. If omitted the priority numbers are sorted by the current runlevel the system is in.

-p, --priority

Alternate layout. Instead of just showing a checkbox, the priority of the service and the S or K are allowed to be edited. This is for more fine tuned control then the default layout allows.

-s levels, --show=levels

Which runlevels to show. This defaults to up to 8 of the runlevels available on the system. Usually this means it will show 1, 2, 3, 4, 5, 0, 6, and S. The syntax calls for the runlevels to be allruntogether. For instance, to show runlevels 3, 4, and 5 the syntax would be CW--show=345. Also see --order.

--level levels

The runlevels this operation will affect. levels can be any number from 0-9 or S. For example, --level 135 will affect runlevels 1, 3, and 5. If --level is not set, the default is to affect runlevels 2, 3, 4, and 5. This option is only used for the command line interface, see the section below labled USING THE CLI for more information.

--list [name]

This option will list all of the services and if they are stopped or started when entering each runlevel. If name is specified, only the information for that service is displayed.

When using either GUI layout described below, all configuration changes to the symlinks will happen immediately, not when the program exits.

The default (simple) layout shows in a grid fashion all of the services that are in CWinit.d and which runlevels they are turned on at. For example, where the CWssh row and CW3 column intersect, if there is an 'X' in the box there that means the ssh service will be turned on when entering runlevel 3. If there is no checkbox it can mean that either there are no links to the service in that specific runlevel, or that the service is turned off when entering that runlevel. If more configuration detail is needed, see the next paragraph and the --priority option.

The priority (advanced) layout also uses a grid fashion, but instead of checkboxes there are text boxes that can have a few different values. If the text box is blank, that means there isn't a symlink in that runlevel for that service. This means that when changing into that runlevel that the service will not be started or stopped, which is significant. If the text box starts with the letter K that means that the service will be stopped when entering that runlevel. If the text box starts with the letter S that means the service will be started when entering that runlevel. The two digits following is the order in which the services are started. That means that CWS08iptables would start before CWS20ssh. For more information see your system documentation.

To move around use the arrow keys, or if the terminal support it, the mouse. Typically there is more then one page of services (unless the terminal screen is large), to move between the pages use CTRL-n or CTRL-p, or simply arrow key down or up at the bottom or top of the screen, respectively. The bottom of the screen also shows these movement commands for quick reference. To restore the symlinks back to their original state before the sysv-rc-conf was run, press the r key. The h key will display a quick reference help screen.

When using the default layout use the space bar to toggle the service on / off. An 'X' in the checkbox indicates that the service is on.

The priority layout uses the default movement keys. In order to edit the fields you can use CTRL-d to delete the character in front of the cursor or backspace to backspace. Use CTRL-b or CTRL-f to move the cursor backwards or forwards within the field. Note that only S, K, or any digit is allowed to be entered into the field.

To start a service now, press the CW+ or CW= key. To stop a service now, press the CW- key.

This will call CW/etc/init.d/service start or CW/etc/init.d/service stop.

If the desired modifications to the symlinks are known and only one quick change is needed, then you can use a CLI interface to sysv-rc-conf. Examples:

  # sysv-rc-conf --level 35 ssh off
  # sysv-rc-conf atd on

The first example will turn ssh off on levels 3 and 5. The second example turns atd on for runlevels 2, 3, 4, and 5.

Note: Feel free to skip this section

sysv-rc-conf stores a cache of all the symlink information from CW/etc/rc{runlevel}.d/ in CW/var/lib/sysv-rc-conf/services (See the --cache option to change the location of this file). It uses this cache to make an intelligent decision on what priority number to give the K or S link when they are changed in the simple layout. This cache is updated/created everytime the program is launched. The program needs to run with root privileges in order to update the cache. The format of the file is as follows:

  RUNLEVEL S|K PRIORITY SERVICE

Here's a few examples:

  2 K 74 ntpd
  2 K 50 xinetd
  3 S 08 iptables
  3 S 80 sendmail

sysv-rc-conf will first see if it can get an exact match from the cache. For example, if the symlink for CWcron in runlevel 3 is S89cron and you uncheck it, sysv-rc-conf will first see if there is an entry in the cache that looks like CW3 K nn cron, if so it will use nn for the priority number.

If there wasn't a match, sysv-rc-conf will then see if there is another S or K (whichever you're switching to, so in this example, K) entry on a different runlevel - so an entry like CWi K nn cron, where i is any runlevel. If found, the link will use nn.

If there still wasn't a match, sysv-rc-conf will look for the opposite of S or K in any run level, and use 100 - that priority. So in our example, CWi S nn cron. If nn is 20, then it will use 80 (100 - 20), since that is typically the way that the priority numbers are used.

If there still isn't a match, the default priority of 20 for S links is used, and the default priority of 80 for K links is used.

sysv-rc-conf should work on any Unix like system that manages services when changing runlevels by using symlinks in CW/etc/rc{runlevel}.d/. Refer to your system documentation to see if that's the case (usually there's a CW/etc/init.d/README).

sysv-rc-conf only manages the symlinks in the CWrc{runlevel}.d directories. It's possible that packages may have other ways of being disabled or enabled.

Because Curses takes over the screen sometimes error messages won't be seen on the terminal. If you run across any weird problems try redirecting STDERR to a file when you execute the program.

For example: # sysv-rc-conf 2> err.out

Report bugs to Joe Oppegaard <joe@pidone.org>

BIinit(8), BIrunlevel(8), BIchkconfig(8), CW/etc/init.d/README

  www: http://sysv-rc-conf.sourceforge.net
  ftp: ftp://ftp.pidone.org/sysv-rc-conf

Joe Oppegaard <joe@pidone.org>