acroread - manual page for acroread

acroread [options] [list of files]

This option specifies the host and display to use. --screen=<SCREEN>

X screen to use. Use this options to override the screen part of the DISPLAY environment variable. --sync

Make X calls synchronous. This slows down the program considerably. -geometry [<width>x<height>][{+|-}<x offset>{+|-}<y offset>]

Size and/or location of the document windows. Note: this option is position dependent, and can be specified multiple times. The geometry specified only affects the list of files following it. -help

Prints the common command-line options. -iconic

Launches in an iconic state on the desktop. -setenv <var>=<value>

Tells the main application to perform the equivalent of C-shell setenv <var> <value>. -tempFile

Indicates files listed on the command line are temporary files and should not be put in the recent file list. The document title will be the title in the pdf document, instead of the filename. -tempFileTitle <title>

Same as -tempFile, except the title is specified. -toPostScript [options] pdf_file ... [ps_dir] -toPostScript [options] -pairs pdf_file_1 ps_file_1 ... -toPostScript [options]

Converts the given pdf_files to PostScript.

In the first form, if the last file specified is a directory, then all preceding files will be converted to PostScript and the generated PostScript files will be placed into ps_dir. If a directory is not specified, then the PostScript files will be placed in the same directory as the original file.

In the second form, the file list contains pairs, each consisting of a PDF filename and a corresponding PostScript filename.

The third form specifies a filter, reading a PDF file from standard input and writing the PostScript file to standard output.

Note: When using -toPostScript it must be the first argument passed in on the command line.

The following are valid options for the conversion of PDF to PostScript: -binary - emit binary PostScript where possible -start <int> - identify the first page in the document to be

converted (default is the first page of the document) -end <int> - identify the last page in the document to be

converted (default is the last page of the document) -optimizeForSpeed - emit PostScript such that all fonts are

emitted once at the beginning of the document.

This

results in faster transmission times and smaller PostScript documents but requires more PostScript printer virtual memory. -landscape - rotate the pages to print landscape -reverse - reverse the page order of the output -odd - emit only odd-numbered pages -even - emit only even-numbered pages -commentsOff - don't print comments -annotsOff - don't print annots

-level2 - emit Level 2 PostScript

(level1 is not supported) -level3 - emit Level 3 PostScript -printerhalftones - use the printer default halftones. -saveVM - download fonts as needed to preserve printer memory -size - Paper size (letter,tabloid,ledger,legal,a3,a4,a5,b4,b5) -scale <int> - scale the pages according to the scale factor

(default is 100 percent) -shrink - shrink the pages to fit the page size -expand - expand the pages to fit the page size

-size <pagesize> - set the page size.

The following page sizes

are recognized:

letter - letter size paper tabloid - tabloid size paper ledger - ledger size paper legal - legal size paper executive - executive size paper a3 - ISO standard A3 size a4 - ISO standard A4 size a5 - ISO standard A5 size b4 - ISO standard B4 size b5 - ISO standard B5 size wxh - custom size paper where w is the integer width

in points and h is the integer height in points -transQuality level - set the transparency flattening level

Value from 1-5, where 1 means rasterize everything, 5 means rasterize as little as possible, default is 3. -openInNewWindow

The application starts normally without checking if it is already running. -version

Print version information and quit. -visual <visual class> [depth=<depth>] -visual id=<visual id> -visual best -visual default

Specifies a visual.

In the first form, the visual class (specified by either its name or number) with an option depth determine the visual to use.

In the second form, the visual id is specified. The prefix 0x must be used for hexadecimal numbers.

The third form uses an internal algorithm based on depth and visual class.

The fourth form simply uses the default visual.

Note that PseudoColor visuals of depth greater than 8, and DirectColor visuals are not supported.

Usage: /usr/bin/acroread [options] [list of files] --display=<DISPLAY>

This option specifies the host and display to use. --screen=<SCREEN>

X screen to use. Use this options to override the screen part of the DISPLAY environment variable. --sync

Make X calls synchronous. This slows down the program considerably. -geometry [<width>x<height>][{+|-}<x offset>{+|-}<y offset>]

Size and/or location of the document windows. Note: this option is position dependent, and can be specified multiple times. The geometry specified only affects the list of files following it. -help

Prints the common command-line options. -iconic

Launches in an iconic state on the desktop. -setenv <var>=<value>

Tells the main application to perform the equivalent of C-shell setenv <var> <value>. -tempFile

Indicates files listed on the command line are temporary files and should not be put in the recent file list. The document title will be the title in the pdf document, instead of the filename. -tempFileTitle <title>

Same as -tempFile, except the title is specified. -toPostScript [options] pdf_file ... [ps_dir] -toPostScript [options] -pairs pdf_file_1 ps_file_1 ... -toPostScript [options]

Converts the given pdf_files to PostScript.

In the first form, if the last file specified is a directory, then all preceding files will be converted to PostScript and the generated PostScript files will be placed into ps_dir. If a directory is not specified, then the PostScript files will be placed in the same directory as the original file.

In the second form, the file list contains pairs, each consisting of a PDF filename and a corresponding PostScript filename.

The third form specifies a filter, reading a PDF file from standard input and writing the PostScript file to standard output.

Note: When using -toPostScript it must be the first argument passed in on the command line.

The following are valid options for the conversion of PDF to PostScript: -binary - emit binary PostScript where possible -start <int> - identify the first page in the document to be

converted (default is the first page of the document) -end <int> - identify the last page in the document to be

converted (default is the last page of the document) -optimizeForSpeed - emit PostScript such that all fonts are

emitted once at the beginning of the document.

This

results in faster transmission times and smaller PostScript documents but requires more PostScript printer virtual memory. -landscape - rotate the pages to print landscape -reverse - reverse the page order of the output -odd - emit only odd-numbered pages -even - emit only even-numbered pages -commentsOff - don't print comments -annotsOff - don't print annots

-level2 - emit Level 2 PostScript

(level1 is not supported) -level3 - emit Level 3 PostScript -printerhalftones - use the printer default halftones. -saveVM - download fonts as needed to preserve printer memory -size - Paper size (letter,tabloid,ledger,legal,a3,a4,a5,b4,b5) -scale <int> - scale the pages according to the scale factor

(default is 100 percent) -shrink - shrink the pages to fit the page size -expand - expand the pages to fit the page size

-size <pagesize> - set the page size.

The following page sizes

are recognized:

letter - letter size paper tabloid - tabloid size paper ledger - ledger size paper legal - legal size paper executive - executive size paper a3 - ISO standard A3 size a4 - ISO standard A4 size a5 - ISO standard A5 size b4 - ISO standard B4 size b5 - ISO standard B5 size wxh - custom size paper where w is the integer width

in points and h is the integer height in points -transQuality level - set the transparency flattening level

Value from 1-5, where 1 means rasterize everything, 5 means rasterize as little as possible, default is 3. -openInNewWindow

The application starts normally without checking if it is already running. -version

Print version information and quit. -visual <visual class> [depth=<depth>] -visual id=<visual id> -visual best -visual default

Specifies a visual.

In the first form, the visual class (specified by either its name or number) with an option depth determine the visual to use.

In the second form, the visual id is specified. The prefix 0x must be used for hexadecimal numbers.

The third form uses an internal algorithm based on depth and visual class.

The fourth form simply uses the default visual.

Note that PseudoColor visuals of depth greater than 8, and DirectColor visuals are not supported.