man dcmdspfn (Commandes) - Export standard display curves to a text file

NAME

dcmdspfn - Export standard display curves to a text file

SYNOPSIS

dcmdspfn [options]

DESCRIPTION

Command line program converts a DCMTK monitor / camera / printer / scanner characteristics file to tabbed text file describing the characteristic curve (CC), the display function and the post-standardized curve (PSC) for an 8 bit display. The 256 values of each curve can be visualized by a common spread sheet program. Above that the display curve (without CC and PSC) can also be computed for a specified luminance/OD range (min/max) and a certain number of Device Driving Levels (DDL).

PARAMETERS

dcmfile-in DICOM input filename to be dumped

OPTIONS

general options

-h --help print this help text and exit

--version print version information and exit

-q --quiet quiet mode, print no warnings and errors

-d --debug debug mode, print debug information

input options

+Im --monitor-file [f]ilename : string text file describing the monitor characteristics

+Ic --camera-file [f]ilename : string text file describing the camera characteristics

+Ip --printer-file [f]ilename : string text file describing the printer characteristics

+Is --scanner-file [f]ilename : string text file describing the scanner characteristics

+Il --lum-range [m]in max : float minimum and maximum luminance (cd/m^2)

+Io --od-range [m]in max : float minimum and maximum optical density (OD), automatically converted to luminance

creation options

+Ca --ambient-light [a]mbient light : float ambient light value (cd/m^2, default: file f)

+Ci --illumination [i]llumination : float illumination value (cd/m^2, default: file f)

+Dn --min-density [m]inimum optical density : float Dmin value (default: off, only with +Ip and +Io)

+Dx --max-density [m]aximum optical density : float Dmax value (default: off, only with +Ip and +Io)

+Cd --ddl-count [n]umber of DDLs : integer number of Device Driving Levels (default: 256, only with --lum/od-range)

+Cf --curve-fitting [n]umber : integer use polynomial curve fitting algorithm with order n (0..99, default: file setting or cubic spline)

output options

+Og --gsdf [f]ilename : string write GSDF curve data to file f

+Oc --cielab [f]ilename : string write CIELAB curve data to file f

NOTES

The output file describing the CC, GSDF or CIELAB and PSC for an 8 bit display system (monitor, camera, printer or scanner) is a simple text file. Lines starting with a '#' are treated as comments and, therefore, skipped as well as blank lines. An input file can for instance be created by the command line tool dconvlum.

The ambient light value possibly defined in the characteristics file is also used for the calculation. In this case the value is part of the file comment header as well as the number of DDL (device driving level) values, the absolute luminance range (measured in candela per square meter) and the range of the JND index (just noticable difference) in case of GSDF. Alternatively, the ambient light value can be specified as a command line option. When setting the two luminance values instead of reading a monitor characteristic file as input the luminance range is linearly divided by the number of DDLs.

For printers and scanners the illumination can be specified in addition to the reflected ambient light (both in the characteristics file and on the command line). The header of the output file includes the minimum and maximum Optical Density (OD) instead of the luminance range. Please note that the OD values in the input file have to be ordered in descending order (in contrast to the luminance values used for monitors and cameras). The DDL value 0 always means black (darkest value) and the maximum DDL value means white (brightest value, clear film).

The data folder contains sample characteristics file for monitors, cameras, printers and scanners. See DICOM standard part 14 for more details on display calibration and Barten's model (including GSDF).

COMMAND LINE

All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values.

Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behaviour conforms to the standard evaluation rules of common Unix shells.

In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file share/data/dumppat.txt).

FILES

share/data/camera.lut - sample characteristics file of a camera

share/data/monitor.lut - sample characteristics file of a monitor

share/data/printer.lut - sample characteristics file of a printer

share/data/scanner.lut - sample characteristics file of a scanner

SEE ALSO

COPYRIGHT

Copyright (C) 1999-2004 by Kuratorium OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.