man em8300setup (Commandes) - program to configure and upload microcode images to em8300-based MPEG decoder cards
NAME
em8300setup - program to configure and upload microcode images to em8300-based MPEG decoder cards
SYNOPSIS
em8300setup [options]
DESCRIPTION
em8300setup is a program that configures and uploads microcode images to em8300-based MPEG decoder cards, such as the Creative Labs DXR3 or the Sigma Designs Hollywood+. With no option, this program tries to upload a microcode image from the default location /usr/share/em8300/em8300.uc, which is not relevant if you extracted your own microcodes.
OPTIONS
- -p, -p6, -n
- Set video output mode to respectively PAL, PAL60 or NTSC.
- -a, -d, -3
- Set audio output mode to respectively analog, digital PCM or digital AC3.
- -o, -w
- Set aspect ratio to respectively normal (4:3) or wide-screen (16:9).
- -S, -s
- Set sub-pictures respectively on or off.
- -q
- Query the current settings for all the options above and exit with no change.
- -f filename
- Specify a microcode image to upload.
AUTHOR
This manual page was written by Nicolas Boullis <nboullis@debian.org>, for the Debian system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, version 2 or any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.