epstool - Edit preview images and fix bounding boxes in EPS files.

epstool command [ options ] inputfile outputfile

epstool is a utility to create or extract preview images in EPS files. It can also calculate optimal bounding boxes.

EPS (Encapsulated PostScript Format)

PREVIEWS

-t4, --add-tiff4-preview

Add a TIFF 4 preview. The preview is monochrome and is intended for use with old programs that won't read TIFF6, such as Word Perfect 5.1 for DOS.

-t6u, --add-tiff6u-preview

Add a TIFF 6 uncompressed preview. See --add-tiff6p-preview for how to add a greyscale or monochrome preview.

-t6p, --add-tiff6p-preview

Add a TIFF 6 preview compressed with packbits (simple run length encoding). The preview will normally be full colour, but you can make it greyscale by adding the option --device bmpgray or --device pgmraw, or monochrome using --device bmpmono or --device pbmraw.

-tg, --add-tiff-preview

Add a TIFF preview using ghostscript to generate the TIFF file. You must specify a suitable TIFF device using --device. If you want a compressed monochrome image, you might use --device tiffg3.

-i, --add-interchange-preview

Add a monochrome interchange preview.

-w, --add-metafile-preview

Add a Windows Metafile (WMF) preview. The metafile will contain a bitmap, not vector information. The preview will normally be full colour. See --add-tiff6p-preview for how to add a greyscale or monochrome preview.

--add-pict-preview

Add a Mac PICT preview. EPSF files with PICT previews can generally be used only on Mac computers. The preview will be full colour. The AppleSingle and MacBinary formats will contain the EPSF and the preview. The AppleDouble or Resource format will contain the preview only and needs to accompany the original EPSF file. To specify the file format use --mac-single, --mac-double, --mac-binary or --mac-rsrc.

--add-user-preview filename Add a user supplied image as a preview. The image can be a Windows bitmap, a PBMPLUS file, a TIFF image or a Windows Metafile. Window bitmaps and PBMPLUS files will be converted to TIFF6 compressed with packbits. TIFF and Windows Metafile images will be added unchanged.

--bitmap

Create a bitmap of the area within the EPS bounding box. The bitmap type must be specified with --device. If processing a DCS 2.0 file, the separation can be specified with --page-number.

--copy

Copy the EPS file. This is generally used with the --bbox option to update the bounding box.

--dcs2-multi

Convert DCS 2.0 separations to multiple files. See DCS 2.0. If the output name is out.eps, then the separations would be named out.eps.Cyan etc.

--dcs2-single

Convert DCS 2.0 separations to a single file. See DCS 2.0.

--dcs2-report

Write the separation names, lengths and CMYK values to standard output. This can be used to identify if a DCS 2.0 file is missing the composite page or preview.

--dump

Display some information about the file type and DSC comments.

-p, --extract-postscript

Extract the PostScript section from a DOS EPS file.

-v, --extract-preview

Extract the preview section from a DOS EPS file.

-h, --help

Display a summary of the epstool commands and options.

--test-eps

Partially test if a file complies with the EPSF specification.

-b, --bbox

Calculate the bounding box using the ghostscript bbox device and update in the EPS file.

--combine-separations filename Combine the separations of the input DCS 2.0 file with those of this file. It is an error if the bounding boxes do not match or they contain separations with the same name. This option must be used with --dcs2-multi or --dcs2-single. The composite page may later need to be updated with --replace-composite.

--combine-tolerance pts When using --combine-separations, allow the bounding boxes to vary by up to pts points. The default is 0 so the bounding boxes must match exactly.

--custom-colours filename When using --replace-composite on a DCS 2.0 file, use the colours specified in this file in preference to those specified in the composite page.

-d, --debug

Be more verbose about progress. Do not remove temporary files.

--device name Specify a ghostscript device to be used when creating the preview or bitmap. For --add-tiff-preview this must be one of the ghostscript tiff devices (e.g. tiffg3, tiff24nc). For any other preview, it must be one of the bmp or pbmplus devices (e.g. bmpgray, bmp16m, pgmraw, ppmraw). For bitmap output (--bitmap) it can be any ghostscript bitmap device.

--doseps-reverse

When writing a DOS EPS file (TIFF or WMF preview), the default is to write the PostScript before the preview. Using --doseps-reverse puts the preview before the PostScript section, which is required by some buggy programs. Either order is correct.

--dpi resolution Set the resolution of the preview or bitmap. The default is 72 dpi.

--dpi-render resolution Render at a higher resolution set by --dpi-render , then downsample to the resolution set by --dpi. This works when adding a preview image or using --replace-composite , but not when using --bitmap. This improves the preview quality when the original contains a pre-rendered image and --dpi-render is set to match the original target printer.

--ignore-information

Ignore information messages from the DSC parser. Use at your own risk. These messages usually indicate that something is wrong with an EPS file, but that most EPS handlers probably won't care. An example is a line with more than 255 characters.

--ignore-warnings

Ignore warnings from the DSC parser. Use at your own risk. These messages are usually about faults in the DSC comments that are recoverable by epstool, but may confuse other EPS handlers. An example is a bounding box that incorrectly uses floating point numbers instead of integer.

--ignore-errors

Ignore warnings from the DSC parser. Use at your own risk. You really should fix the EPS file first.

--gs command

Specify the name the ghostscript program. On Unix the default is gs. On Windows, epstool will check the registry for installed versions of ghostscript and use the latest, otherwise it will use gswin32c.exe.

--gs-args arguments Specify additional Ghostscript arguments. This might be used to select anti-aliasing with "-dTextAlphaBits=4 -dGraphicsAlphaBits=4"

--output filename Specify the output file (instead of using the second file parameter). Using the filename - causes epstool to write to standard output, which requires the use of --quiet.

--mac-binary

When adding a PICT preview, use the MacBinary I format. for the Mac

--mac-double

When adding a PICT preview, use the AppleDouble format for the Mac.

--mac-rsrc

When adding a PICT preview, use the Resource format for the Mac.

--mac-single

When adding a PICT preview, use the AppleSingle format for the Mac.

--missing-separations

When writing a DCS 2.0 file, epstool will normally fail if a separation is missing. When this option is used, it will remove references to missing separations when writing the file.

--page-number page When creating a bitmap with --device from a DCS 2.0 file, page specifies the separation to be used. Page 1 is the composite and page 2 is the first separation. Use --dcs2-report to get the list of separations.

--quiet

Try to run without writing to standard output.

--rename-separation oldname newname When copying a DCS 2.0 file with --dcs2-multi or --dcs2-single, rename separation with oldname to newname. This option implies --missing-separations. It is assumed that the new name is just an alias for the same colour and that the CMYK or RGB values for the separation are not changed. This option may be used multiple times. This must be used if the input file incorrectly has two separations of the same name.

--replace-composite

Some DCS 2.0 files do not have an image in the composite page. This option replaces the composite page with a CMYK image derived from the separations. This option must be used with --dcs2-multi or --dcs2-single. See also the options --dpi and --custom-colours.

The Macintosh does not use a flat file system. Each file can have a data fork and a resource fork. EPSF files have the PostScript in the data fork, and optionally have a preview in the resource fork as a PICT image. In addition, file type is obtained from the finder info rather than a file extension. File types use a four character code such as "EPSF" or "PICT". When Macintosh files are copied to a foreign file system, the resource fork may be left behind. Alternatives to retain the resource fork are to package the finder data, data fork and resource fork in a single MacBinary or AppleSingle file, or to put the data fork in a flat file and the finder info and resource fork in an AppleDouble file. The Mac OSX finder will handle AppleDouble files automatically when copying files to and from a foreign file system. When copying test.eps to a foreign file system, the data fork would be written as test.eps and the finder info and resource fork to the AppleDouble file ._test.eps or .AppleDouble/test.eps.

Epstool can read MacBinary and AppleSingle files. It can write MacBinary I, AppleSingle, AppleDouble or Resource files. Files written by epstool will have type EPSF and creator MSWD. When adding a preview to test.eps, it is suggested that you create the MacBinary file test.eps.bin. On a Macintosh computer you then need to extract it with StuffIt Expander. Another alternative is to write the AppleDouble file to ._test.eps then copy both files to a file system accessible to a Mac computer.

If the output file name starts with . then AppleDouble will be assumed, otherwise if it ends with .as then AppleSingle will be assumed, otherwise if it ends with .rsrc or /rsrc then Resource will be assumed, otherwise MacBinary will be assumed. When writing a MacBinary file, it is recommended that you end the filename in .bin. To force the file type, use --mac-single, --mac-double, --mac-binary or --mac-rsrc.

On Mac OS X you can access a file's resource fork from command line tools by appending /rsrc to the original file name. The easiest way to add a preview to the file test.eps on Mac OS X is to let epstool write in --mac-rsrc format to test.eps/rsrc (see Examples).

The Desktop Color Separation (DCS) image file format contains a low resolution preview, a main file with the full resolution composite image, and colour separations with full resolution separated plates. The separations will typically contain Cyan, Magenta, Yellow, Black and possibly spot colours. There are two versions of DCS 2.0.

Multiple File

The main file contains %%PlateFile: (name) EPS Local filename comments which give the filenames of the separation plates. The main file may contain a low resolution DOS EPS preview. The separation files do not contain previews.

Single File

This is an abuse of the EPS specification. The single file contains the main file and the separations concatenated together, which makes the DSC comments incorrect. The main file specifies the byte offsets to the separations using %%PlateFile: (name) EPS #offset size. The single file may then be placed inside a DOS EPS file with a low resolution preview. By default, epstool writes single file DCS 2.0.

Epstool can add previews to single and multiple file DCS 2.0. It can split single file DCS 2.0 into multiple files and vice versa. This allows a single file DCS 2.0 to be split, the composite image replaced, a new preview created, and then be recombined into a single file.

Some DCS 2.0 files do not have an image in the composite page. To determine if the composite page does not contain an image, use --dcs2-report and look to see if the composite section is very short. Using --dcs2-single --replace-composite replaces the composite page with the headers of the original composite page and a body containing a CMYK image derived from the separations. Set the resolution of the CMYK image using --dpi.

When replacing the composite page with a CMYK image using --replace-composite, the --custom-colours option is useful for dealing with DCS 2.0 files that have incorrect CMYK colours, for example specifying that the varnish layer is grey. Each line of the CMYK colours file is formatted like a DSC %%CMYKCustomColor: or %%RGBCustomColor: line, as shown in the example below.

%%CMYKCustomColor: 0.00 0.00 0.00 0.00 Varnish

%%CMYKCustomColor: 1.00 0.68 0.00 0.12 (Dark Blue)

%%RGBCustomColor: 0.5 0.0 0.0 (Dark Red)

DCS2 files should not have two separations with the same name. Epstool will not allow a DCS2 output file to have duplicate separation names. Use --rename-separation to resolve this.

Add colour preview (24bit/pixel) to EPS file

epstool -t6p tiger.eps output.eps

Add TIFF (G3 Fax) preview to tiger.eps.

epstool --add-tiff-preview --device tiffg3 tiger.eps output.eps

Any GS TIFF device can be used, e.g. tiffg4, tiffpack

Extract TIFF preview from tiger.eps

epstool -v tiger.eps tiger.tif

Fix incorrect %%BoundingBox then add TIFF4 preview.

epstool --bbox -t4 golfer.eps output.eps

Adjust the BoundingBox of an existing EPS file, but don't add a preview:

epstool --copy --bbox input.eps output.eps

Add user supplied Windows Metafile to EPS file.

epstool --add-user-preview logo.wmf logo.eps output.eps

Typically used when an application can export EPS and WMF separately but can't export EPS with WMF preview.

Add a PICT preview and write an AppleDouble file.

epstool --add-pict-preview --mac-double tiger.eps ._tiger.eps

To be used by a Mac, both tiger.eps and ._tiger.eps need to be on a foreign file system accessible to the Mac.

Add a PICT preview, overwriting the existing resources.

epstool --add-pict-preview --mac-rsrc tiger.eps tiger.eps/rsrc

On Mac OS X you can access a file's resource fork from command line tools by appending "/rsrc" to the file's original name.

When adding a WMF preview to an EPS file using -add-user-preview filename, the placeable metafile header is removed from the metafile as it is put into the EPS file. When extracting a WMF preview from an EPS file, a placeable metafile header is created from the EPS BoundingBox information. This placeable metafile header assumes that the WMF has its origin at (0,0), which might not be correct.

When epstool is creating a TIFF or WMF preview, it will convert palette colour images into 24-bit/pixel.

The environment variable TEMP should point to a writeable directory for temporary files. If not defined, /tmp will be used for Unix and the current directory will be used for other platforms.

epstool was written by Russell Lang <gsview@ghostgum.com.au>

This man page was contributed by Martin Pitt <martin@piware.de> for the Debian GNU/Linux system (but may be used by others).