One important hint: Unless you use a host name number from your host name list, always put all of your options before the host name on command line. You can combine options as ever you want. But keep in mind that there are some options which have optional numbers. Thus if you set the host number right after such an option pftp could mistaken this as the options optional number. To be on the save side just put the host name number as your first option followed by all other options. Options on command line have highest priority.

-

Hereby the client sends all data from standard input to the destination host. If the client and the server are started with this option, the server sends all bytes to standard output. If on the other hand the server was started with this option, but the client sends regular files, the server copies all files to disk. If only the client was started with the option, the server copies the received stream to a file called Stream.x. x is an increasing number beginning at one. The client reads one character at a time as well as the server, i.e. sending many characters with `-' eats a lot of cpu time and might be slower (see `-b[NUM]').

-a

Always overwrite existing files. (Server option only)

-aN1aN2...

Seek the N1th offset from the beginning of the first file, the N2th offset from the beginning of the second file etc. If a file is incomplete received then you may try to send just the missing part of the file, i.e. N1 respectively N2 is the size of the incomplete file. I suggest to truncate the incomplete file by a several bytes at first. Then start the server in the appropriate directory and choose `a' when the server asks you. (Client option only)

-ANUM

You can limit the number of clients allowed at once to NUM. The default number is 255.

-b[NUM]

Same as `-' except that a string of size NUM is read and written at once. pftp does not limit this value. So whatever your system supports you may set. The default string size for `-b' is 4096. Hereby as well as when sending files the net buffer size defaults to 32768 unless `-B[NUM]' is given on command line.

-bb

Same as `-b32768'.

-B[NUM]

Sets the maximum net buffer size, i.e. SO_SNDBUF resp. SO_RCVBUF (see setsockopt(2)), specified by `NUM' or if `NUM' is omitted by the variable PFTPNETBUF (see ENVIRONMENT). The default maximum net buffer size is 32768. This applies to data sent or received. The net buffer size is not the window size, which is determined by TCP in kernel space on the server side, though. But the bigger you set this size the bigger the window size mostly is although the window size is dynamically determined. The better your network connection is the bigger the net buffer size can be (see also "TCP/IP Network Administration", Second Edition by Craig Hunt, O'Reilly & Associates, p. 20).

-BB

Same as `-B65536'.

-c hostnames

Connections are accepted from clients with specified host names only. All other clients are simply refused. Host names can also be given as numbers which are looked up in your pftp resource file (see RESOURCES). If no host names are specified the environment variable PFTPCLIENTS is read instead (see ENVIRONMENT). You may also specify domain names: All host names that begin with a dot are supposed to be domain names, all host names that begin with an `@' followed by a net in numbers-and-dots notation are supposed to be nets. For UDP based connections you will probably need a fast machine when receiving video streams. (Server option only)

-d[=DIR]

The daemon works just like the server started from inetd (see `-i' ). There are just two differences: First the daemon keeps running and second the daemon may be started by a normal user. If your system has shadow password you have to set the variable PFTPPASS unless the daemon is running with root privileges. If the daemon is started with root privileges pftp listens on its officially assigned system port number 662. The client needs this option to send data to the daemon started by a normal user on a user port. You should use `-i' respectively `-n' if you want to send data to the daemon started with root privileges, i.e. pftp's daemon is listening on its officially assigned system port number 662.

-D=DIR

Change to directory DIR before receiving data. (Server option only)

-e

Create a normal password (MD5) with crypt(). If you want to set the variable PFTPPASS you may need the password.

-f[n]

Filter all files before sending them over the network, i.e. the standard output of the filter on the client side is connected to the standard input of the filter on the server side. The filters are specified by PFTPCFILTER respectively PFTPSFILTER (see ENVIRONMENT). If you need to interact with a filter program use option `-q'! (TCP based connections only)

-F

Determine MPEG AUDIO bitrate and set the bandwidth accordingly. This is just a simple determination, i.e. pftp looks at the first frame header of each file to determine the bitrate. This may fail for some streams since the bitrate usually changes permanently. So the bitrate found in the first frame header is no more than an avarage value. Nevertheless most MPEG AUDIO players buffer a large enough amount of the stream. Thus even if the streams are sent with a constant bitrate it works quite well that way. If the bitrate is not recognized the current file will be skipped. Keep in mind pftp is a multi functional data transfer program but no internet radio. ;^) (Client option only)

-i[=DIR]

Start pftp from `/etc/inetd.conf' by inetd. You do need a system pftp resource file which is located in `/etc/pftp.conf'. If there is no resource file the connection is closed. The following lines may be specified in `/etc/inetd.conf' (see inetd(8)) and `/etc/services' (see services(5)) in order to start the pftp server by inetd with the capability to copy files as well as directories and to accept specified clients only:

for `/etc/inetd.conf' (all on one line):
pftp stream  tcp  nowait  root
/usr/bin/pftp pftp -irc

for `/etc/services':
pftp     662/tcp

At first pftp reads the system resource file located in `/etc/pftp.conf' and gets the user name and the number of the filter program to be used from the client. Both is sent raw through the net, i.e. a port sniffer may see them. Then pftp starts two subprocesses and changes their setuid/setgid bits to the user's setuid/setgid bits--root is denied by default (see PFTPNOROOT). Now the password is sent filtered through the net. Thus it is up to you to decide which level of security you need. The server changes the directory to DIR if given by the client or to the user's home directory and sets the environment variables `HOME' and `USER' appropriately. The user must have a pftp resource file in his/her home directory from which the filter program is to be read. The client needs this option to send data to the server started with root privileges and to set the destination directory DIR which is set to the remote user's home directory if =DIR is omitted. The port number is set to pftp's officially assigned system port number 662. The port number found in the pftp resource file is ignored.

-I

The client will also send the last time of modification, the user and group id of the files and directories (see `-r'), as well as the permission bits of directories if `-r' is used. The server will accept and set the information. The access time is set to the value of the last modification time. Also empty directories are copied that way if `-r' is given on command line. Furthermore empty files and FIFOs are copied and also devices if the server respectively the daemon runs with root privileges. To use this option by default set the variable PFTPSINFO to `1'.

-j

Read file and directory (see `-r') names from standard input one file name per line. This option can also be used if you to send file information about directories without using `-r', e.g.

find dir -depth | pftp -jIL user@remote_host

will send the files read from standard input and set the information of all files and directories. Options `-l', and `-[b]' are silently ignored. (Client option only)

-l

List host names from file `.pftprc' and send files. New hosts can be added to the host name list by calling pftp with the host name. This option cannot be used in standard input mode! (Client option only)

-L

Do not follow symbolic links. The link names are temporaryly saved in a file. The file is sent after all other files have been sent. On the target host this file is called `PFTP_MAKE_LINKS'. It is just a shell script file you may execute as such `./PFTP_MAKE_LINKS' to automatically create all symbolic links. The local temporary file is removed after it was sent. For secrurity reasons you may also check the shell script before you execute it. If no symbolic links were found no PFTP_MAKE_LINKS file is sent. (Client option only)

-m[NUM]

Same as `-u[NUM] with all capabilities except that multicasting is enabled. So it is needed to send or receive multicasted datagrams unless one of the other `-m' options is chosen. All `-m' options imply this option. So you only need it to change the default payload length. Be sure that you enabled multicasting for your side, i.e. the following needs to be done on the Linux Operating System: 1) Enable multicasting within your kernel sources options (Networking options ---> IP: multicasting). 2) Set the appropriate route (route add -net 224.0.0.0 netmask 240.0.0.0 dev multicasted_interface). If everything is fine you should find `/proc/net/igmp' in your file system. (See also the excellent document: `HOWTO/Multicasting'.)

-mg GROUP

Set the multicast group to GROUP. In order to receive multicasted datagrams you need to join a multicast group. (Server option only)

-mi IADDR

Use the interface IADDR at your local host for sending respectively receiving multicasted datagrams. By default the kernel chooses an interface for you.

-ml

By default pftp unsets looping back of datagrams. Thus if you want to receive back what you sent from your local host you will need this option. (Client option only)

-mtNUM

Set the time to live (IPv4) respectively the hop limit (IPv6). Defaults to 1. (Client option only)

-M[=FILE]

In combination with `-n' the message file FILE will be added to the data. If =FILE is omitted: interactively edit a message file (see PFTPEDITOR). This option implies `-n'. (Client option only)

-N[NUM]

Peek for new data in the upload directory. If you used a host specific PFTPRECEIVE variable which points to a different upload directory you can set NUM to the number of the host name list entry. Thus you can peek for new data in the directory where the host specific variable points to.

-n

If no further options are given starts the simple pftp file and directory manager. Else: Send data to another user. The other user must have set the variable PFTPRECEIVE to the absolute path of an upload directory (see ENVIRONMENT). On the remote host pftp has to be started by inetd (see `-i') or run as a daemon (see `-d'). This option is implied if something like this

pftp user@remote_host files

is given on command line. The port is set to pftp's officially assigned system port number 662.

-n=SUBJECT

Same as `-n' but also add subject line SUBJECT to the data.

-nl

Using host specific PFTPRECEIVE variables you can choose the upload directory from your host name list and enter the pfm (see also `-N[NUM]').

-nn

Same as `-n' but interactively ask for a subject line and add that line to the data.

-NUM

Choose host NUM from host name list. (Client option only)

-o

TCP: Accept only one connection at a time. (Server option only)

-p[NUM]

This options works just like `-b[NUM]' except that all data received, i.e. also files, are sent to standard output. If `NUM' is omitted standard output is unbuffered. (Server option only)

-pp

Same as `-p32768'. (Server option only)

-P[NUM]

Sets the datagram priority to NUM. If `NUM' is omitted the value defaults to 4. (IPv6 client option only)

-q

Silent mode. Unless options given on command line are misused or unknown pftp will produce no output to stderr. By default all existing files are skipped. If option `-a' is given on command line all existing files are overwritten. If the environment variable PFTPSLOG is set to the absolute path of a log file, the server logs all data normally written to stderr (see ENVIRONMENT). This option is meant for shell skripts and the like. To be more manageable for scripts there are 52 return statuses, which are listed in the README file. You should use this option if you want to pipe output of pftp into a pager otherwise pftp resets its own terminal modes on exit. It is also needed if you need to interact with the filter program.

-r

If the server and the client are started with this option, all files received from the client are copied into the appropriate directories. If necessary pftp creates new directories within the current directory, i.e. the directory where the server was started from. If only the client is started with this option, all files sent by the client are copied into the current directory. For security reasons the server does not save files in upper directories, e.g. a `/', or `..' at the beginning of a file name is just ignored. Also combinations of such are ignored. In combination with `-T[NUM]' a random string for the net performance test is used. The random string is produced only once (see also `-R') and then send again and again.

-R

If the remote file already exists a `.x' will be suffixed to the new file, where `x' is an increasing number starting at one. This option is only recognized if pftp was started as a server on command line (see also PFTPRENAME ). (Client option only) In combination with `-T[NUM]' a random string for the net performance test is used. A new random string for every loop is produced (see also `-r'), which consumes a lot of cpu time. (Client option only)

-s

TCP: Always skip existing files. UDP: Display on the fly the number of bytes received by the datagrams. (Server option only)

-SNUM

Using UDP based data transfer used to drop every NUMth datagram. It is meant to test the stability of the application on the server side. On the Linux Operating System you can interactively increase or decrease the value by typing `h' respectively `b'. Typing `0' means that no datagram will be dropped. (Client option only)

-T[NUM]

Perform a net performance test. NUM is the number of bytes being sent during the test. You must adjust the input buffer size with `-b[NUM]'. You can also set the net buffer size (see `-B[NUM]'), the datagram priority (see `-P[NUM]'), and the bandwidth (see `-w[NUM]'). For a UDP based test you cannot set the net buffer size, though. But you can adjust the payload length with `-u[NUM]'. In combination with `-r' respectively `-R' a random string is sent while the buffer size respectively the payload length is the first seed of the random numbers. Using `-r' the same random string is send again and again, whereas with option `-R' a new random string is produced within every loop--this consumes a lot of cpu time.

-u[NUM]

Use UDP as data transfer protocol. NUM is the payload length, i.e. the size of the string sent at once at a time. The default size is 1472. You cannot combine this option with `-B', `-d', `-f', and `-i'. On the client side you can send data and files as if using normal tcp connections. Be advised to set the bandwidth (see `-w[NUM]'). On the Linux Operating System you can interactively increase or decrease the bandwidth by typing `=' to increase it by 64 bytes or `.' to increase by one byte respectively `-' to decrease it by 64 bytes or `,' to decrease by one byte, and interactively drop datagrams periodically by typing `h' respectively `b'. Type `0' to stop dropping of datagrams. This is meant to test your applications on the server side. You can stop and continue sending datagrams by typing space. You can skip the current file by typing `n'. The datagrams are sent without any further protocol header--just UDP. Thus you can use the client to send data to any program that is able to receive datagrams via UDP. Likewise pftp's server can be used to receive any data via UDP, i.e. the server does not care if datagrams are lost. You can also set the string length to be received at once by NUM. The default size is 1472. Since the mechanism is meant to send AUDIO and VIDEO streams, all data received is written to standard output. On the Linux Operating System you can interactively turn on and off of displaying the number of bytes received by typing `s' on the server side (you will need a fast terminal to display on the fly the number of bytes received).

-v

Ouputs buffer sizes, the bandwidth, datagram priority (IPv6), and the filter program being used.

-w[NUM]

Sets bandwidth in bytes per second specified by `NUM' or if `NUM' is omitted by the variable PFTPBANDWID. UDP: On the Linux Operating System this value can be interactively changed by typing `=' respectively `-'. (Client option only)

-W

Displays the warranty.

-x

Lets the server exit after the first connection. (Server option only)

hostname

hostname may look like a host name list entry (see RESOURCES) without the following port number. pftp contacts the server started with root privileges if a user name is given on command line, i.e. the port number is set to 662. If a user name and a password is included option `-i' is implied. If a user name is included option `-n' respectively `-i' is implied. Thus you don't need to specify option `-n' or `-i'.

In order to send two files start the server with a port number at your choice at the destination host (port numbers between 1025 and 32768 are always legal unless they are in use--then simply choose another port number): pftp 1234 Then start the client with the same port number at the origin host: pftp 1234 destinationhost file1 file2 The server is waiting for connections until you quit it by typing `q' (Linux) or `^C' (other Systems).

Now we want to copy the current directory including all subdirectories. Start the server at the destination host with option `-r': pftp 1234 -r And analogeously start the client with the same option: pftp 1234 -r destinationhost . I suggest to let pftp create the file `.pftprc' to start pftp with a default port number. See section RESOURCES for further details. If you start pftp without having a resource file and you use options, or omit some, that could also be looked up in this file, pftp will ask you if you want it to create a resource file. To send data from standard input using the default port number start the server with option `-' and redirect the standard output wherever you want to: pftp - > file The client is started as usual but this time with option `-': pftp - destinationhost_or_host_number < file Imagine you want to send files to a pftp server started with root privileges and upload the files in the directory `$HOME/misc' where `$HOME' is the remote user's home directory. If the remote host name is for example listed in your host name list as number one you may want to use the following pftp -1i=misc files If your host name list entry does not contain the remote user's login name and maybe the password you will be asked for login name and password. Now lets send data to a friend of whom you have no password. The destination host is listed in your host name list as number 7. Further more you want to use a filter program for the connection and also send not merely files but also directories. Thus all you have to type is pftp -7frn data where data is files and directories. In this case the first filter listed in your filter variable will be used which is the opposite filter program of the other user's first filter program.

Now let's send directory `dir' to another user recursively. The following implies `-n': pftp -r user@remote_host_name dir Some programs are able to read data from standard input. Assuming there is a huge file on a remote server we just want to read in by such a program you can do the following on the program's server side: pftp -xu | program - (Keep in mind that when sending datagrams the program reading from standard input is in charge if datagrams are lost. If the program is not able to handle incomplete data you need to use TCP based data transfer: exchange `u' with `pp' for example on the server side and just drop the `u' on the client side.) And on the client side with a bandwidth of about 169 KBytes: pftp -uw173056 remote_host_name files That is the way to use UDP based data tansfer with pftp. You might welcome that when omitting the `x' the server keeps running without closing standard output. Thus if the `program' supports it you can let another client connecting the server and sending its data without ever restarting the server.

Now let's do the latter example for the multicasted case: Assuming we want to use multicast group 225.0.0.27 and keep our trafic within our local subnet: pftp -xmg 225.0.0.27 | program - And on the client side with a bandwidth of about 169 KBytes: pftp -mw173056 225.0.0.27 files Another important feature of pftp is that you can send not merely files but also messages. You might say, well I can send e-mails. But what differs sending messages with pftp and sending messages with the mail system is that it is reliable, i.e. you know that the message arrived where you want it. Imagine you want to send just a message to a user on a remote host. Thereby using filter number one from your filter list and adding a subject line and a message interactively. pftp -nnMf user@remote_host If `remote_host' is a number the corresponding host from your host name list is taken. You can set your favorite editor with the variable PFTPEDITOR. If you do not save the message file with your editor the sending will be discarded. Imagine the following situation: You want to install a completely new distribution of your operating system. Unfortunately the current system and the users home directories are on the same partition--of course, next time you choose a different one. But the problem stays the same for now. To solve the problem you may copy the whole home directory to a different computer you have access to. So just start pftp's server on the remote host as such pftp -Irx Now you can start the client on your local computer as follows: pftp -LIr remote_host /home The `L' prevents pftp from following symbolic links. Instead a script file is sent afterwards to the remote host which can be executed to set the links. Remember to start the client with root privileges to ensure that all files are accessible for the client. You may also set the variable PFTPLOG on the client side to the absolute path of an error log file since pftp does not exit if files are not accessible. Another problem that might occur is that you have a very large gzipped archive file on one host which you want to unpack on another host but without uploading the file before unpacking it. Here is the solution with pftp: First start the server on the target host pftp -xpp | gzip -cd | tar xvf - and then send the archive file with pftp's client pftp target_host linux-2.2.13.tar.gz Using the GNU version of tar (see tar(1)) you can also use option `z' of tar instead of `gzip -cd |'.

If the client is started with `-NUM' (see OPTIONS) variables that follow the host name list entry number NUM are prefered to the default variables at the beginning of the resource file. The next host name list entry (NUM+1) terminates the list of host specific variables. Host name list entries that are only recognized by the server and variables that are not recognized by the client are ignored.

If pftp was started as a daemon (see `-d' and `-i') all remote host names are compared with those in the user's resource file. If a match is found and the host name list entry is followed by host specific variables those variables are read instead of the corresponding default variables at the beginning of the user's resource file. The first match found is used! The daemon/server recognizes also two further types of host name list entries. The first matches the net given in numbers-and-dots notation, e.g suppose you want to use the same host specific variables for all remote hosts of net 130.149.0.0 then the host name list entry looks like

 @130.149.0.0

 .tu-berlin.de

If a line or a variable value begins with a `@V<variable name>' respectively a `@F<file name>' then the line or the variable value is substituted by the value of the environment variable `variable name' respectively by the first line of the file `file name'.

Variables denoted with `<*>' may also be set as environment variables. Those denoted with `<c>' are recognized by the client as a host specific variable, variables denoted with `<d>' are recognized by the daemon as a host specific variable, and variables denoted with `<s>' are recognized by the server started on command line as a host specific variable. Command line settings have highest priority; environment variables have higher priority than variables specified in the resource file.

PFTPAINFO <d>

If set to `1' file information received from the client (see PFTPSINFO and `-I') is accepted and applied by the daemon. By default it is set to `1'.

PFTPAUSER

May be used to specify an alias name for a real login name. If the alias name is set the real login name is denied. If pftp was started by the internet daemon alias names have to be specified in `/etc/pftp.conf'. Otherwise within the pftp resource file of the user who started the daemon. If the login name is omitted or equals the alias name the user with that login name is prevented from receiving data by the daemon or the server started by the internet daemon. An alias is set as follows

PFTPAUSER alias_name login_name

PFTPBANDWID <*> <c>

Holds the value of the bandwidth (see `-w') in bytes per second. By default pftp sends as fast as possible.

PFTPCFILTER <*> <c> and PFTPSFILTER <*> <d> <s>

If on the client side variable PFTPCFILTER and on the server side variable PFTPSFILTER hold names of filter programs with possible options the filters will be used if `-f' is given on command line. The variables may hold the absolute path to several filters. All filter programs have to be seperated by colons. You may choose a specific filter program with `-fn' where n is the number of the filter program. The first filter program has number 1. If n is not given the first filter program will be used. In order to list all client filters set n to C, to list all server filters set n to S. To see the host specific filter variables use `-NUM' respectively `-l'. Technically speeking: pftp sends its data right into the standard input of the filter program. The standard output of the filter program on the client side is directly, i.e. via the network, connected to the standard input of the filter program on the server side. On the server side pftp reads the data right from the standard ouput of the filter program. Thus keep in mind that the filter on the client side is just the opposite of the filter on the server side! If you need to interact with your filter program you should use option `-q' to prevent pftp from blocking keyboard input.

PFTPCFVARnum <c> and PFTPSFVARnum <d> <s>

If your filter program needs environment variables to be set you can use these variables to do so. PFTPCFVARnum is used for the client and PFTPSFVARnum for the server side. `num' is the number of your filter program in the filter program list. If `num' is omitted the variables will be used if there are no filter number specific variables. The variables are set right before the filter program is started. Variable settings are seperated by colons. Suppose you want to set environment variables for the first filter program then variables are set like this

PFTPCFVAR1 variable1 value1:variable2 value2
PFTPSFVAR1 variable1 value1:variable2 value2

PFTPCLIENTS <*> and PFTPDCLIENT

May hold all client host names that are accepted. The names are seperated by spaces. So if `-c' follows no host name that variable is read instead. pftp converts all host names to the numbers-and-dots (IPv6: numbers-and-colons) notation and compares them with the remote host names that are going to send data. You can also specify a net in numbers-and-dots notation (e.g. @130.149.0.0) respectively a domain name (e.g. .tu-berlin.de) from which hosts are accepted. PFTPDCLIENT is used by the daemon. It offers the user the chance to choose accepted hosts too. But the user can only accept those hosts which are also accepted by root, e.g. if pftp was started with `-c' the user can only choose hosts from the list of hosts root accepts.

PFTPEDITOR <*> <c>

Holds the name of the editor. The default editor is `vi'.

PFTPFORCEF <d>

This variable is meant for the paranoic. ;^) If set to `1' clients have to use a filter program otherwise they get a `User accepts no files' message.

PFTPIUPDATE <c>

The pfm updates the main menu looking for incoming data in the specified interval in seconds. The default value is two seconds. Zero means no update. You can always update a menu with `^L'.

PFTPLOG <*>

If the variable PFTPLOG is set to the absolute path of an error file, the client is logging all error messages that occur, while sending files, in the error file. Since the client does not exit on errors concerning unreadable or empty files and directories, it might be useful to log the error messages. So you can send these mostly few files afterwards.

PFTPLOGFILE

If set to `1', and PFTPSLOG is set, logs also all file and directory names being transfered.

PFTPNETBUF <*> <c>

Sets the maximum net buffer size in bytes (see `-B').

PFTPNOROOT

If set to `0' allows root `login' when pftp is running as a daemon with root privileges (see `-d') or was started by inetd (see `-i'). The default setting is `1'.

PFTPPAGER <*> <c>

Holds the name of the pager. The default pager is pftp's internal pager. The internal pager's help is called by typing `?'.

PFTPPASS <d>

If set to an encrypted normal password using crypt() (see crypt(3)) or pftp called with option `-e' this password is used instead of the user's system password. If your system has shadow password and you want to run the daemon without root privileges you do need this variable to be set. You may set it to `*' in order to deny login at all.

PFTPPERCENT

If set to `1' pftp outputs the percentage of bytes sent, but not received, from the current file. The lack depends on the window size (see also `-B[NUM]'). Sending files will be slower by some tenth of a second.

PFTPPORT

Holds the default port number.

PFTPRECEIVE <d>

Holds the absolute path of an upload directory for files and directories sent by other users (see `-n'). If this variable is unset no other user will be allowed to upload files and directories.

PFTPRENAME <d>

If the remote file already exists a `.x' will be suffixed to the new file, where `x' is an increasing number starting at one. This variable is only read if pftp runs as a daemon (see also `-R').

PFTPSINFO <c> <s>

If set to `1' the last time of modification, the user and group id of files and directories as well as permission bits of directories are always sent. If accepted on the server side (see also PFTPAINFO and `-I') the information will be set and even empty files, FIFOS and empty directories will be created. If PFTPNOROOT is set to 0 also devices are copied. Keep in mind that only the superuser is allowed to creat devices. By default it is set to `0'.

PFTPSLOG <*>

If set to the absolute path of a log file the daemon as well as the server started by inetd log all connections.

PFTPSORTBY <c>

Determines sorting order within the pfm. May be set to `a' for alphabetical (this is the default setting), `s' for size, and `t' for the time of last change.

PFTPUPLIMIT <d>

Sets a limit in kilo bytes to the upload directory (see PFTPRECEIVE). The size defaults to 4096 kilo bytes. Setting PFTPUPLIMIT to zero means to set no limit at all. This is useful for big sites with large upload directories. If more than one client is sending data to the same user pftp is recalculating the directory size before each file to be sent. This takes more time the larger the upload directory is and the more data is already contained in the upload directory.