SPASS - automated theorem prover for full first-order logic with equality

SPASS [options] [inputfile]

SPASS is an automated theorem prover for full sorted first-order logic with equality that extends superposition by sorts and a splitting rule for case analysis.

Command line options in SPASS are implemented via modifications to the GNU command line option package for C. Just giving the option sets its value to 1 and means enabling the option. In order to disable an option the value has to be set to 0 by declaring -Option=0. The following options are currently supported by SPASS: Enables/disables the auto mode where SPASS configures itself automatically. The inference/reduction rules, the sort technology, the ordering and precedence as well as the splitting and selection strategy are set. In auto mode SPASS is complete. Mixing the auto mode with user defined options may destroy completeness. Default is 1. Enables/disables input in SPASS via stdin. The file argument is ignored. Default is 0. Enables/disables the interactive mode. First, SPASS is given a set of axioms and then the prover accepts subsequent proof tasks. Default is 0. Enables/disables the CNF translation mode of SPASS. If the option is set, SPASS only performs a clause normal form translation. If no output file argument is given SPASS prints the CNF to stdout. Default is 0. Enables/disables the set of support strategy. Default is 0. Sets the number of possible splitting applications to n. If n=-1 then the number of splits is not limited. Default is 0. Sets the amount of memory available to SPASS for the proof search to n bytes. The memory needed to startup SPASS cannot be restricted. Default is -1 meaning that memory allocations is only restricted by available memory. Sets a time limit for the proof search to n seconds. Default is -1 meaning that SPASS may run forever. The time limit is polled when SPASS selects a new clause for inferences. If a single inference step causes an explosion to the number of generated clauses it may therefore happen that a given time limit is significantly exceeded. Enables/disables documentation output for static soft typing. The used sort theory as well as the (failed) proof attempt for the sort constraint is printed. Default is 0. Enables/disables proof documentation. If SPASS finds a proof it is eventually printed. If SPASS finds a saturation, the saturated set of clauses is eventually printed. Enabling proof documentation may significantly decrease SPASS's performance, because the prover must store clauses that can be thrown away otherwise. Default is 0. Enables/disables the documentation of split backtracking steps where the current backtracking level is printed. Default is 0. Sets the maximal number of mainloop iterations for SPASS. Default is -1. Enables/disables printing of subsumed clauses. Default is 0. Enables/disables printing of rewrite applications. Default is 0. Enables/disables printing of condensation applications. Default is 0. Enables/disables printing of tautology deletion applications. Default is 0. Enables/disables printing of obvious reduction applications. Default is 0. Enables/disables printing of sort simplification applications. Default is 0. Enables/disables printing of static soft typing applications. All deleted clauses are printed. Default is 0. Enables/disables printing of matching replacement resolution applications. Default is 0. Enables/disables printing of unit conflict applications. Default is 0. Enables/disables printing of clauses where redundant equations have been removed (assignment equation deletion). Enables/disables printing of clauses derived by inferences. Default is 0. Enables/disables printing of the given clause, selected to perform inferences. Default is 0. Enables/disables printing of labels. If the -DocProof is set and no labels for formulae are provided by the input, SPASS generates generic labels that are then printed by enabling this option. Default is 0. Enables/disables printing of kept clauses. These are clauses generated by inferences (backtracking) that are not redundant. Clauses derived during input reduction/saturation are not printed. Default is 0. Enables/disables printing of the input clause set. Default is 1. Enables/disables printing of derived empty clauses. Default is 0. Enables/disables printing of a final statistics on derived/backtracked/kept clauses, used time and used space. Default is 1. Enables/disables the output of an eventually found model to a file. If set to 1, all clauses in the final set are printed. If set to 2, only potentially productive clauses are printed, that are clauses with no selected negative literal and a maximal positive one. If <problemfile> is the name of the input problem and the eventually generated set is saturated, the saturation is printed to the file <problemfile>.model, for otherwise to <problemfile>.clauses. The latter case may, e.g., be caused by a time limit. Default is 0. Enables/disables the output of an eventually found proof to a file. Using this option requires to set the option -DocProof. If <problemfile> is the name of the input problem the proof is printed to <problemfile>.prf. Default is 0. Enables/disables the output of all flag values. The flag settings are printed at the end of a SPASS run in form of a DFG-Syntax input section. Default is 0. Enables/disables the output of optimized Skolemization applications. Default is 0. Enables/disables the output of strong Skolemization applications. Default is 0. Enables/disables the output of clauses deleted because of bound restrictions. Default is 0. Enables/disables the output of bound restriction changes. Default is 0. Enables/disables printing of expansions of atom definitions. Default is 0. Sets the selection strategy for SPASS. If set to 0 no selection of negative literals is done, if set to 1 negative literals in clauses with more than one maximal literal are selected, if set to 2 negative literals are always selected. The latter case results in an ordered hyperresolution like behavior of ordered resolution. Default is 1. Enables/disables the reduction of the initial clause set. Default is 1. Determines the monadic literals that built the sort constraint for the initial clause set. If set to 0, no sort constraint is built. If set to 1, all negative monadic literals with a variable as argument form the sort constraint. If set to 2, all negative monadic literals form the sort constraint. Setting -Sorts to 2 may harm completeness, since sort constraints are subject to the basic strategy and to static soft typing. Default is 1. Enables/disables input saturation. The saturation is incomplete but is guaranteed to terminate. Default is 0. Sets the ratio between given clauses selected by weight or the depth in the search space. The weight is the sum of all symbol weights determined by the -FuncWeight and -VarWeight options. The depth of all initial clauses is 0 and clauses generated by inferences get the maximal depth of a parent clause plus 1. Default is 5, meaning that 4 clauses are selected by weight and the fifth clause is selected by depth. Sets the ratio to compute the weight for conjecture clauses and therefore allows to prefer those. Default is 0 meaning that the weight computation for conjecture clauses is not changed. Enables/disables full reduction. If set to 0, only the set of worked off clauses is completely inter-reduced. If set to 1, all currently hold clauses (worked off and usable) are completely inter-reduced. Default is 1. Sets the weight of function/predicate symbols. The weight of clauses is the sum of all symbol weights. This weight is considered for the selection of the given clause. Default is 1. Sets the weight of variable symbols (see -FuncWeight). Default is 1. Enables/disables the preference for clauses with many variables. While clauses are selected by weight, if this option is set and two clauses have the same weight, the clause with more variable occurrences is preferred. Default is 0. Selects the mode for bound restrictions. Mode 0 means no restriction, if set to 1 all newly generated clauses are restricted by weight (see -BoundStart) and if set to 2 clauses are restricted by depth. Default is 0. The start restriction of the selected bound mode. For example, if bound mode is 1 and bound start set to 5, all clauses with a weight larger than 5 are deleted until the set is saturated. This causes an increase of the used bound value that is determined by the minimal increase saving a before deleted clause. Default is -1 meaning no bound restriction. The number of loops applying the actions restrictions/increasing bound. If the number of loops is exceeded all bound restrictions are cancelled. Default is 1. Sets the maximal number of applications of atom definitions to input formulae. Default is 0, meaning no applications at all. Sets the term ordering. If 0 then KBO is selected, if 1 the RPOS is selected. Default is 0. Enables/disables optimized Skolemization. Default is 1. Enables/disables Strong Skolemization. Default is 1. Sets the maximal number of proof steps in an optimized Skolemization proof attempt. Default is 100. Enables/disables formula renaming. Default is 1. Enables/disables the printing of formula renaming applications. Default is 0. Enables/disables certain equality reduction techniques on the formula level. Default is 1. Enables/disables the inference rule Empty Sort. Default is 0. Enables/disables the inference rule Sort Resolution. Default is 0. Enables/disables the inference rule Equality Resolution. Default is 0. Enables/disables the inference rule Reflexivity Resolution. Default is 0. Enables/disables the inference rule Equality Factoring. Default is 0. Enables/disables the inference rule Merging Paramodulation. Default is 0. Enables/disables the inference rule Superposition Right. Default is 0. Enables/disables the inference rule Ordered Paramodulation. Default is 0. Enables/disables the inference rule Standard Paramodulation. Default is 0. Enables/disables the inference rule Superposition Left. Default is 0. Enables/disables the inference rule Ordered Resolution. If set to 1, Ordered Resolution is enabled but no resolution inferences with equations are generated. If set to 2, equations are considered for Ordered Resolution steps as well. Default is 0. Enables/disables the inference rule Standard Resolution. If set to 1, Standard Resolution is enabled but no resolution inferences with equations are generated. If set to 2, equations are considered for Standard Resolution steps as well. Default is 0. Enables/disables the inference rule Standard Hyper-Resolution. Default is 0. Enables/disables the inference rule Ordered Hyper-Resolution. Default is 0. Enables/disables the inference rule Unit Resulting Resolution. Default is 0. Enables/disables the inference rule Ordered Factoring. If set to 1, Ordered Factoring is enabled but only factoring inferences with positive literals are generated. If set to 2, negative literals are considered for inferences as well. Default is 0. Enables/disables the inference rule Standard Factoring. Default is 0. Enables/disables the inference rule Unit Resolution. Default is 0. Enables/disables the inference rule Bounded Depth Unit Resolution. Default is 0. Enables/disables the inference rule Apply Definitions. Currently not supported. Default is 0. Enables/disables the reduction rule Forward Rewriting. Default is 0. Enables/disables the reduction rule Backward Rewriting. Default is 0. Enables/disables the reduction rule Forward Matching Replacement Resolution. Default is 0. Enables/disables the reduction rule Backward Matching Replacement Resolution. Default is 0. Enables/disables the reduction rule Obvious Reduction. Default is 0. Enables/disables the reduction rule Unit Conflict. Default is 0. Enables/disables the terminator by setting the maximal number of non-unit clauses to be used during the search. Default is 0. Enables/disables the reduction rule Tautology Deletion. If set to 1, only syntactic tautologies are detected and deleted. If set to 2, additionally semantic tautologies are removed. Default is 0. Enables/disables the reduction rule Static Soft Typing. Default is 0. Enables/disables the reduction rule Sort Simplification. Default is 0. Enables/disables the reduction rule Forward Subsumption Deletion. Default is 0. Enables/disables the reduction rule Backward Subsumption Deletion. Default is 0. Enables/disables the reduction rule Assignment Equation Deletion. This rule removes particular occurrences of equations from clauses. If set to 1, the reduction is guaranteed to be sound. If set to 2, the reduction is only sound if any potential model of the considered problem has a non-trivial domain. Default is 0. Enables/disables the reduction rule Condensation. Default is 0. Enables/disables the inclusion of an Otter options header. This option only applies to dfg2otter. If set to 1 it includes a setting that makes Otter nearly complete. If set to 2 it activates auto modus and if set to 3 it activates the auto2 modus. Default is 0.

To run SPASS on a single file without options:

        SPASS  I<filename>

        SPASS  -PGiven=0 -PProblem=0 I<filename>

You can also specify options for SPASS in the input problem. In the DFG syntax, you would use

        list_of_settings(SPASS).
        {*
          set_flag(DocProof,1).
        *}
        end_of_list.

There are three types of options you can set in the input: Sets a flag to a value. Valid flags and values are described in the OPTIONS section. Sets the precedence for the listed symbols. The precedence is decreasing from left to right, i.e. the leftmost symbol has the highest precedence. Every entry in the list has the form

        SYMBOL | (SYMBOL, WEIGHT [, {l, r, m}])

        set_DomPred(P).

         -> R(f(x,y),a), P(x,a).

checkstat(1), filestat(1), pcs(1), pgen(1), rescmp(1), tpform(1), tpget(1), deprose(1), dfg2otter(1), dfg2otterpl(1), dfg2dfg(1)

Contact : Thomas Hillenbrand <hillen@mpi-sb.mpg.de> Christoph Weidenbach <weidenb@mpi-sb.mpg.de>