These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

-b0bits

Number of bits per plane (1 or 2) [1].

-c

Print in color (else monochrome).

-m0media

Media code to send to printer [1]. | n l | n l . 1 standard 259 letterhead 2 transparency 261 thickstock 3 glossy 262 postcard 257 envelope 263 labels

-p0paper

Paper size code to send to printer [1]. | n l | n l. 1 letter 9 A4 5 legal 11 A5 7 executive 13 B5

-n0copies

Number of copies [1].

-r0xresxyres

Set device resolution in pixels/inch [600x600].

-s0source

Source (Input Slot) code to send to printer [7]. | n l | n l. 1 upper 4 manual 7 auto

-2

Print in 2-up. Requires the psutils package.

-4

Print in 4-up. Requires the psutils package.

These are the options used to customize the operation of foo2oak for a particular printer.

-u0xoffxyoff

Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-l0xoffxyoff

Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-L0mask

Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.

NAME

foo2oak-wrapper - Convert Postscript into an OAKT printer stream

SYNOPSIS

foo2oak-wrapper [options] [ps-file]

DESCRIPTION

foo2oak-wrapper is a Foomatic compatible printer wrapper for the foo2oak printer driver. This script reads a Postscript ps-file or standard input and converts it to Oak Technology OAKT printer format for driving the HP Color LaserJet 1500 laser printer and other OAKT-based printers.

This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

-b0bits

Number of bits per plane (1 or 2) [1].

-c

Print in color (else monochrome).

-m0media

Media code to send to printer [1]. | n l | n l . 1 standard 259 letterhead 2 transparency 261 thickstock 3 glossy 262 postcard 257 envelope 263 labels

-p0paper

Paper size code to send to printer [1]. | n l | n l. 1 letter 9 A4 5 legal 11 A5 7 executive 13 B5

-n0copies

Number of copies [1].

-r0xresxyres

Set device resolution in pixels/inch [600x600].

-s0source

Source (Input Slot) code to send to printer [7]. | n l | n l. 1 upper 4 manual 7 auto

-2

Print in 2-up. Requires the psutils package.

-4

Print in 4-up. Requires the psutils package.

These are the options used to customize the operation of foo2oak for a particular printer.

-u0xoffxyoff

Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-l0xoffxyoff

Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-L0mask

Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

-b0bits

Number of bits per plane (1 or 2) [1].

-c

Print in color (else monochrome).

-m0media

Media code to send to printer [1]. | n l | n l . 1 standard 259 letterhead 2 transparency 261 thickstock 3 glossy 262 postcard 257 envelope 263 labels

-p0paper

Paper size code to send to printer [1]. | n l | n l. 1 letter 9 A4 5 legal 11 A5 7 executive 13 B5

-n0copies

Number of copies [1].

-r0xresxyres

Set device resolution in pixels/inch [600x600].

-s0source

Source (Input Slot) code to send to printer [7]. | n l | n l. 1 upper 4 manual 7 auto

-2

Print in 2-up. Requires the psutils package.

-4

Print in 4-up. Requires the psutils package.

These are the options used to customize the operation of foo2oak for a particular printer.

-u0xoffxyoff

Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-l0xoffxyoff

Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-L0mask

Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

-b0bits

Number of bits per plane (1 or 2) [1].

-c

Print in color (else monochrome).

-m0media

Media code to send to printer [1]. | n l | n l . 1 standard 259 letterhead 2 transparency 261 thickstock 3 glossy 262 postcard 257 envelope 263 labels

-p0paper

Paper size code to send to printer [1]. | n l | n l. 1 letter 9 A4 5 legal 11 A5 7 executive 13 B5

-n0copies

Number of copies [1].

-r0xresxyres

Set device resolution in pixels/inch [600x600].

-s0source

Source (Input Slot) code to send to printer [7]. | n l | n l. 1 upper 4 manual 7 auto

-2

Print in 2-up. Requires the psutils package.

-4

Print in 4-up. Requires the psutils package.

These are the options used to customize the operation of foo2oak for a particular printer.

-u0xoffxyoff

Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-l0xoffxyoff

Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.

-L0mask

Send the logical clipping values from -u/-l in the OAKT stream. foo2oak-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases. end any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts

These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.

-g0gsopts

Additional options to pass to Ghostscript, such as -g-dDITHERPPI=nnn, etc. This option may appear more than once.

-G0profile.icm

Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).

-G0gamma-file.ps

Prepend gamma-file.ps to the Postscript input to perform color correction using the setcolortransfer Postscript operator. For example, the file might contain:

{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

These options are used for debugging foo2oak and its wrapper.

-S0plane

Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes. l l. 1 Cyan 2 Magenta 3 Yellow 4 Black

-D0level

Set Debug level [0].