mlnet - your door to Edonkey, Directconnect, Gnutella, Bittorent, Overnet, OpenNap networks

This manual page documents briefly the mlnet command.

This manual page was written for theDebian GNU/Linuxdistribution because the original program does not have a manual page.

With mlnet you will be able to connect to different peer-to-peer network :

•

Edonkey

•

DirectConnect

•

Overnet

•

OpenNap

•

Bittorent

•

Gnutella

Peer to peer network is based on sharing file. Moreover, many servers on this different network have connection scripting. If you want to be welcome everywhere, it is highly recommended to share some files. When sharing take two consideration : number of file and total size of this file. The limit is typically : sharing more than 1 Gb and less than 1000 files.

MLDonkey is always in developpement. The download rate is not guaranteed. Through version it appears that queueing, uploading, downloading could be buggy. Normally, none of this bug really restrict you download / upload rate. If you see a very low rate, try to review all your settings and sharing before contacting the MLDonkey user mailing-list <mldonkey-users@nongnu.org>.

COLUMNS,LINES sets width and height for the terminal. This is the terminal as you see it when connecting to the telnet port of you MLDonkey client.

MLDONKEY_DIR sets name of the directory where the application will run. This directory must contains all the files describe in mldonkey_ini

MLDONKEY_MESSAGES name of the file where you can found the message for mldonkey.

YAHOO_SERVER hostname of the yahoo server to contact for Instant Messenging.

Common options deals with the Edonkey protocol, which is by default always registered, and some basic features of the server

-v

Print version number and exit

-exit

Exit immediatly

-format

Type : filename

Check file format

-test_ip

Type : ip

Undocumented

-check_impl

Display information on the implementations

-find_port

Find another port when one is already used

-dump

Type : filename

Dump file

-known

Type : filename

Print a known.met file

-part

Type : filename

Print a .part.met file

-server

Type : filename

Print a server.met file

-pref

Type : filename

Print a server.met file

-help--help

Display the list of options

-enable_server

Type : string

Default : false

Set to true if you also want mldonkey to run as a server (experimental)

-interface_buffer

Type : string

Default : 1000000

The size of the buffer between the client and its GUI. Can be useful to increase when the connection between them has a small bandwith

-max_name_len

Type : string

Default : 50

The size long names will be shorten to in the interface

-previewer

Type : string

Default : mldonkey_previewer

Name of program used for preview (first arg is local filename, second arg is name of file as searched on eDonkey

-initialized

Type : string

Default : false

(not used)

-network_update_url

Type : string

URL where mldonkey can download update information on the network

-file_completed_cmd

Type : string

A command that is called when a file is completely downloaded. Arguments are: >file_name on disk< >md4< >size<

-log_size

Type : int

Default : 300

Size of log in number of records.

-verbosity

Type : string

A space-separated list of keywords. Each keyword triggers printing information on the corresponding messages :

•

mc : debug client messages

•

ms : debug server messages

•

net : debug net

•

verb : debug other

•

sp : debug source propagation

•

sm : debug source management

•

do : some download warnings

•

up : some upload warnings

•

unk : unknown messages

•

ov : overnet

•

share: debug sharing

•

md4 : md4 computation

•

loc : debug source research

-options_version

Type : int

Default : 2

(internal option)

-stdout

Keep outputing to the console after starting

-daemon

Start as a daemon ( detach from console and run in background ).

-allow_browse_share

Allow other user to browse our share list.

Options that cannot be classified

-term_ansi

Type : boolean

Default : true

Is the default terminal an ANSI terminal

-emule_protocol_version

Type : int

Default : 38

The version of the protocol that should be sent to eMule peers

-buffer_writes

Type : boolean

Default : false

Buffer writes and flush after buffer_writes_delay seconds (experimental).

-buffer_writes_delay

Type : int

Default : 30

Buffer writes and flush after buffer_writes_delay seconds (experimental).

-buffer_writes

Type : int

Default : 1024

Flush buffers if buffers exceed buffer_writes_threshold kB (experimental).

These options deal with memory management system

You need to have some knowledge of Ocaml memory management to understand all this features

-compaction_overhead

Type : string

Default : 25

The percentage of free memory before a compaction is triggered

-compaction_delay

Type : string

Default : 2

Force compaction every n hours (in [1..24])

-minor_heap_size

Type : string

Default : 32

Size of the minor heap in kB

These options deal with location of different file.

-temp_directory

Type : string

The directory where temporary files should be put.

-incoming_directory

Type : string

The directory where downloaded files should be moved after commit.

-incoming_directory_prio

Type : int

Default : 0

The upload prio of the incoming directory.

-commit_in_subdir

Type : string

The subdirectory of temp/ where files should be moved to

-mldonkey_bin

Type : string

Default : .

Directory where mldonkey binaries are installed

Options dealing with identification of the client

-client_name

Type : string

Default : (auto-generated)

Small name of client

-client_uid

Type : string

Default : (auto-generated)

The UID of this client.

--use_client_id

Type : boolean

Default : false

True if you want your client IP to be set from servers ID.

-allowed_ips

Type : string

Default : 127.0.0.1

List of IP address allowed to control the client via telnet/GUI/WEB. It could be a list separated by white space. Use 255 as a wild card : 192.168.0.255 means 192.168.0.*.

-max_hard_upload_rate

Type : string

Default : 7

The maximal upload rate you can tolerate on your link in kB/s

The limit will apply on all your connections (clients and servers) and both control and data messages.

0 means no limit

-max_hard_download_rate

Type : string

Default : 50

The maximal download rate you can tolerate on your link in kB/s

The limit will apply on all your connections (clients and servers) and both control and data messages.

0 means no limit

-new_upload_system

Type : boolean

Default : true

Should we use the new experimental upload system

-max_opened_connections

Type : int

Default : 200

Maximal number of opened connections

-max_indirect_connections

Type : int

Default : 300

Maximal number of incoming connections at any moment ( 10000 = unlimited ).

-client_buffer_size

Type : string

Default : 500000

Maximal size of the buffers of a client

-ask_for_gui

Type : bool

Default : true

Ask for GUI start

-start_gui

Type : bool

Default : false

Automatically Start the GUI

-mldonkey_gui

Type : string

Default : /usr/bin/mlgui

Name of GUI to start

-run_as_user

Type : string

The login of the user you want mldonkey to run as, after the ports have been bound (can be use not to run with root priviledges when a port < 1024 is needed)

-run_as_userid

Type : int

Default : 0

The login of the user you want mldonkey to run as, after the ports have been bound (can be use not to run with root priviledges when a port < 1024 is needed). 0 means disabled.

-http_realm

Type : string

Default : MLdonkey

The realm shown when connecting with a WEB browser

-use_html_frames

Type : string

Default : true

This option controls whether the WEB interface should use frames or not

-commands_frame_height

Type : string

Default : 140

The height of the command frame in pixel (depends on your screen and browser sizes).

-vd_reload_delay

Type : string

Default : 120

The delay between reloads of the vd output in the WEB interface

-html_checkbox_file_list

Type : string

Default : true

Whether to use checkboxes in the WEB interface

-options_prefix

Type : string

The prefix which is appended to options names when they are used in the telnet/WEB interfaces.

-motd_html

Type : string

Default :

Message printed at startup (automatically downloaded from the network_update_url ).

-html_mods

Type : boolean

Default : true

Whether to use the modified WEB interface.

-html_mods_human_readable

Type : boolean

Default : true

Whether to use human readable GMk number format.

-html_mods_use_relative_availability

Type : boolean

Default : true

Whether to use relative availability in the WEB interface.

-html_mods_vd_age

Type : boolean

Default : true

Whether to display the Age column in vd output.

-html_mods_vd_last

Type : boolean

Default : true

Whether to display the Last column in vd output.

-html_mods_vd_queues

Type : boolean

Default : true

Whether to display the Queues in vd # output.

-html_mods_show_pending

Type : boolean

Default : true

Whether to display the pending slots in uploaders command.

-html_mods_max_messages

Type : int

Default : 10

Maximum chat messages to log in memory.

-html_mods_style

Type : int

Default : 0

Which html_mods style to use (set with html_mods_style command).

-html_mods_vd_network

Type : boolean

Default : false

Whether to display the Net column in vd output.

-html_mods_vd_active_sources

Type : boolean

Default : false

Whether to display the Active Sources column in vd output.

-html_mods_vd_prio

Type : boolean

Default : false

Whether to display the Priority column in vd output.

-html_mods_load_message_file

Type : boolean

Default : false

Whether to load the mldonkey_messages.ini file (false=use internal settings).

-smtp_server

Type : string

Default : 127.0.0.1

The mail server you want to use (must be SMTP). Use hostname or IP address

-smtp_port

Type : string

Default : 25

The port to use on the mail server (default 25)

-add_mail_brackets

Type : boolean

Default : false

Does your mail-server need >...< around addresses.

-mail

Type : string

Your e-mail if you want to receive mails when downloads are completed

-filename_in_subject

Type : boolean

Default : true

Send filename in mail subject.

-tcpip_packet_size

Type : int

Default : 40

The size of the header of a TCP/IP packet on your connection (ppp adds 14 bytes sometimes, so modify to take that into account)

-max_udp_sends

Type : int

Default : 10

The number of UDP packets you send every check_client_connections_delay

-mtu_packet_size

Type : int

Default : 1500

The size of the MTU of a TCP/IP packet on your connection.

-redirector

Type : string

Default : 128.93.52.5:3999

IP:port of the network redirector

-minimal_packet_size

Type : int

Default : 600

The size of the minimal packet you want mldonkey to send when data is available on the connection.

These options deal with the different protocol you can activate.

-enable_overnet

Type : boolean

Default : true

Set to true if you also want mldonkey to run as an overnet client( enable_donkey must be true ).

-enable_donkey

Type : boolean

Default : true

Set to true if you also want mldonkey to run as a donkey client

-enable_opennap

Type : boolean

Default : false

Set to true if you also want mldonkey to run as a napster client (experimental)

-enable_soulseek

Type : boolean

Default : false

Set to true if you also want mldonkey to run as a soulseek client (experimental)

-enable_audiogalaxy

Type : boolean

Default : false

Set to true if you also want mldonkey to run as an audiogalaxy satellite (experimental)

-enable_directconnect

Type : boolean

Default : true

Set to true if you also want mldonkey to run as a direct-connect node (experimental)

-enable_openft

Type : boolean

Default : false

Set to true if you also want mldonkey to run as a OpenFT sub node (experimental)

-enable_bittorent

Type : boolean

Default : true

Set to true if you also want mldonkey to run as a Bittorent client.

-enable_gnutella

Type : boolean

Default : false

Set to true if you also want mldonkey to run as a Gnutella 1/2 sub node ( experimental ).

These options deals with search results sorting, sampling...

-new_print_search

Type : boolean

Default : false

Use new display of search results (with tables, which might be slower for your browser to display)

-filter_search_delay

Type : int

Default : 5

Delay before two filtering on results (results are not displayed until filtered). Min is 1 second.

-display_downloaded_results

Type : boolean

Default : true

Whether to display results already downloaded

-filter_table_threshold

Type : int

Default : 50

Minimal number of results for filter form to appear

-max_displayed_results

Type : string

Default : 1000

Maximal number of results displayed for a search

-filters

Type : string

Filters on replies (replies will be kept).

-use_file_history

Type : string

Default : true

Keep seen files in history to allow local search (can be expensive in memory)

-max_xs_packets

Type : string

Default : 30

Max number of UDP packets per round for eXtended Search

Chat options deals with the builtin chat protocol

-chat_app_port

Type : string

Default : 5036

Port of the external chat application

-chat_app_host

Type : string

Default : localhost

Hostname of the external chat application

-chat_port

Type : string

Default : 4002

Port used by the external chat application to use the core as a proxy

-chat_bind_addr

Type : string

Default : 0.0.0.0

The IP address used to bind the chat server

-chat_console_id

Type : string

Default : donkey console

The id to use for communicating with the core console through chat interface

-chat_warning_for_downloaded

Type : string

Default : true

Use the chat to indicate when a file has been downloaded

-max_dialog_history

Type : string

Default : 30

Max number of messages of Chat remembered

These options deal with the different port binding

Some connections are protocol specific.

-port

Type : string

Default : 4662

The port used for connection by other donkey clients.

-gui_port

Type : string

Default : 4001

Port for user interaction

-gui_bind_addr

Type : string

Default : 0.0.0.0

The IP address used to bind the gui server

-http_port

Type : string

Default : 4080

The port used to connect to your client with a WEB browser

-http_bind_addr

Type : string

Default : 0.0.0.0

The IP address used to bind the http server

-telnet_port

Type : string

Default : 4000

Port for user interaction

-telnet_bind_addr

Type : string

Default : 0.0.0.0

The IP address used to bind the telnet server

-client_ip

Type : string

Default : 192.168.0.12

The last IP address used for this client

-force_client_ip

Type : string

Default : false

Use the IP specified by 'client_ip' instead of trying to determine it ourself. Don't set this option to true if you have dynamic IP.

-min_reask_delay

Type : string

Default : 720

The minimal delay between two connections to the same client (in seconds)

-max_reask_delay

Type : string

Default : 3600

The maximal delay between two connections to the same client

-download_sample_rate

Type : int

Default : 1.

The delay between one glance at a file and another

-download_sample_size

Type : int

Default : 10

How many samples go into an estimate of transfer rates

-update_gui_delay

Type : int

Default : 1

Delay between updates to the GUI

-server_connection_timeout

Type : int

Default : 15

Timeout when connecting to a server

-client_timeout

Type : int

Default : 40

Timeout on client connections when not queued

-ip_cache_timeout

Type : int

Default : 3600

The time an ip address can be kept in the cache

-queued_timeout

Type : string

Default : 1800.

How long should we wait in the queue of another client

-upload_timeout

Type : string

Default : 1800.

How long can a silent client stay in the upload queue

-connected_server_timeout

Type : string

Default : 1800.

How long can a silent server stay connected

-check_client_connections_delay

Type : string

Default : 180.

Delay used to request file sources

-check_connections_delay

Type : string

Default : 5.

The delay between server connection rounds

-save_options_delay

Type : string

Default : 900.

The delay between two saves of the 'downloads.ini' file (default is 4 minutes)

-compute_md4_delay

Type : string

Default : 10.

The delay between computations of the md4 of chunks

-initial_score

Type : string

Default : 5

-max_connected_servers

Type : string

Default : 3

The number of servers you want to stay connected to

-max_server_age

Type : string

Default : 2

Max number of days after which an unconnected server is removed

-save_file_history

Type : string

Default : true

Save the file history in a file and load it at startup

-master_server_min_users

Type : string

Default : 0

The minimal number of users for a server to be admitted as one of the 5 master servers

-force_high_id

Type : boolean

Default : false

Immediately close connection to servers that don't grant a High ID

-update_server_list

Type : boolean

Default : true

Set this option to false if you don't want auto update of servers list

-keep_best_server

Type : boolean

Default : true

Set this option to false if you don't want mldonkey to change the master servers it is connected to

-max_walker_servers

Type : int

Default : 1

Number of servers that can be used to walk between servers

-max_source_age

Type : int

Default : 3

Sources that have not been connected for this number of days are removed

-max_clients_per_second

Type : int

Default : 10

Maximal number of connections to sources per second

-max_connections_per_second

Type : int

Default : 10

Maximal number of connections that can be opened per second.

-log_clients_on_console

Type : boolean

Default : false

-max_upload_slots

Type : string

Default : 10

How many slots can be used for upload

-dynamic_slots

Type : boolean

Default : false

Set this to true if you want to have dynamic upload slot allocation (experimental).

-donkey_bind_addr

Type : string

Default : 0.0.0.0

The IP address used to bind the donkey client

-propagate_sources

Type : boolean

Default : true

Allow mldonkey to propagate your sources to other donkey clients

-max_sources_per_file

Type : int

Default : 500

Maximal number of sources for each file

-min_left_sources

Type : int

Default : 100

Minimal number of sources for a file

-reliable_sources

Type : boolean

Default : false

Should mldonkey try to detect sources responsible for corruption and ban them.

-source_management

Type : int

Default : 3

Which source management to use :

•

1 : based on separate time queues, shared by files (2.02-1...2.02-5)

•

2 : based on unified queues with scores, shared by files (2.02-6...2.02-9)

•

3 : based on separate file queues (2.02-10)

-good_client_rank

Type : int

Default : 500

Set the maximal rank of a client to be kept as a client.

-client_md4

Type : string

Default : (auto-generated)

The MD4 of this client

-black_list

Type : string

Default : true

-protocol_version

Type : string

Default : 61

The version of the protocol that should be sent to servers (need restart).

-random_order_download

Type : boolean

Default : false

Should we try to download chunks in random order (false = linearly) ?

-max_concurrent_downloads

Type : int

Default : 60

The maximal number of files in Downloading state (other ones are queued).

-upload_power

Type : int

Default : 5

The weight of upload on a donkey connection compared to upload on other peer-to-peer networks. Setting it to 5 for example means that a donkey connection will be allowed to send 5 times more information per second than an Open Napster connection. This is done to favorise donkey connections over other networks, where upload is less efficient, without preventing upload from these networks.

-propagate_servers

Type : string

Default : true

Send an UDP packet to a central servers with the list of servers you are currently connected to, for the central server to be able to generate accurate server lists.

-files_queries_per_minute

Type : string

Default : 1

Maximal number of localisation queries that can be sent to one server per minute. Some servers kick clients when this value is greater than 1

-files_queries_initial_delay

Type : string

Default : 20

Initial delay after sending the first localisation queries to a server, before sending other localisation queries.

-min_left_servers

Type : string

Default : 200

Minimal number of servers remaining after remove_old_servers

-servers_walking_period

Type : string

Default : 6

How often should we check all servers (minimum 4 hours, 0 to disable)

-keep_cancelled_in_old_files

Type : string

Default : false

Are the cancelled files added to the old files list to prevent re-download ?

-send_warning_messages

Type : boolean

Default : false

True if you want your mldonkey to lose some upload bandwidth sending messages to clients which are banned :)

-ban_queue_jumpers

Type : boolean

Default : true

True if you want your client to ban clients that try queue jumping (3 reconnections faster than 9 minutes)

-ban_period

Type : int

Default : 1

Set the number of hours you want client to remain banned

-sources_per_chunk

Type : int

Default : 1

How many sources to use to download each chunk

-auto_commit

Type : boolean

Default : true

Set to false if you don't want mldonkey to automatically put completed files in incoming directory.

Direct Connect options deal with the DirectConnect protocol

-DC--max_connected_servers

Type : string

Default : 5

The number of servers you want to stay connected to

-DC--search_timeout

Type : string

Default : 60

The time a search is active

-DC--load_hublist

Type : string

Default : true

Download a list of servers

-DC--firewalled

Type : string

Default : false

Is this client firewalled (use passive searches)

-DC--shared_offset

Type : string

Default : 11534336.

An amount of bytes to add to the shared total (can help to connect)

-DC--client_port

Type : string

Default : 4444

The port to bind the client to

-DC--login

Type : string

Your login on DC (no spaces !!!)

-DC--query_hublist_limit

Type : string

Default : 100

The limit on the number of servers to avoid asking for a new list

-DC--commit_in_subdir

Type : string

Default : DC

The subdirectory of temp/ where files should be moved to

-DC--servers_list_url

Type : string

Default : http://www.neo-modus.com/PublicHubList.config

The URL from which the first server list is downloaded

-DC--client_description

Type : string

Default : mldc client

The description sent in the MyINFO message

-DC--client_speed

Type : string

Default : DSL

The line speed sent in the MyINFO message

-DC--client_keyinfo

Type : string

Default : Pk=mldc

The key info sent in the handshake message

-DC--network_options_prefix

Type : string

Default : DC-

The prefixes used before Direct-Connect options

-DC--client_options_version

Type : string

Default : 0

To automatically update your options

OpenNap options deal with the OpenNapster protocol

-OpenNap--client_port

Type : int

Default : (auto-generated)

The data port for napster uploads

-OpenNap--max_connected_servers

Type : int

Default : 5

The number of servers you want to stay connected to

-OpenNap--client_password

Type : string

Default : nopass

The password used to log on the napster server

-OpenNap--client_port

Type : string

Default : 6699

The data port for napster uploads

-OpenNap--client_info

Type : string

Default : mldonkey v1.99beta3

The info on this client

-OpenNap--use_napigator

Type : string

Default : true

Download a list of servers from www.napigator.com

-OpenNap--servers_list_url

Type : string

Default : http://www.napigator.com/servers/

The URL from which servers list is downloaded

-OpenNap--server_connection_timeout

Type : string

Default : 10.

Timeout when connecting to a server

-OpenNap--max_shared_files

Type : string

Default : 400

The maximal number of files to share on a server

-OpenNap--commit_in_subdir

Type : string

Default : Napster

The subdirectory of temp/ where files should be moved to

-OpenNap--options_prefix

Type : string

Default : OpenNap-

The prefix which is appended to options names when they are used in the telnet/WEB interfaces

Overnet options deals with the overnet protocol

-overnet_store_size

Type : string

Default : 2000

Size of the filename storage used to answer queries

-overnet_port

Type : int

Default : (auto-generated)

Port for overnet

-overnet_max_known_peers

Type : string

Default : 8192

Maximal number of peers to keep overnet connected (should be 2048)

-overnet_search_keyword

Type : string

Default : false

Allow extended search to search on overnet

-overnet_search_timeout

Type : string

Default : 140

How long shoud a search on Overnet wait for the last answer before terminating

-overnet_query_peer_period

Type : string

Default : 5.

Period between two queries in the overnet tree (should not be set under 5)

-overnet_max_search_hits

Type : int

Default : 200

Max number of hits in a search on Overnet

-overnet_options_version

Type : int

Default : 1

(internal)

-overnet_protocol_connect_version

Type : int

Default : 1044

The protocol version sent on Overnet connections.

-overnet_protocol_connectreply_version

Type : int

Default : 44

The protocol version sent on Overnet connections replies.

Soulseek options deal with the soulseek protocol

-slsk--max_connected_servers

Type : string

Default : 10

The number of servers you want to stay connected to

-slsk--ip_cache_timeout

Type : string

Default : 3600.

The time an ip address can be kept in the cache

-slsk--load_serverlist

Type : string

Default : true

Download a list of servers

-slsk--client_port

Type : string

Default : 2234

The port to bind the client to

-slsk--login

Type : string

Your login on SoulSeek

-slsk--password

Type : string

Default : mldonkey

Your password on SoulSeek

-slsk--query_serverlist_limit

Type : string

Default : 100

The limit on the number of servers to avoid asking for a new list

-slsk--commit_in_subdir

Type : string

Default : SoulSeek

The subdirectory of temp/ where files should be moved to

-slsk--verbose_clients

Type : string

Default : 0

Level of verbosity when communicating with clients

-slsk--verbose_servers

Type : string

Default : 0

Level of verbosity when communicating with servers

-slsk--next_token

Type : string

Default : 1

The last token used for a query is saved here

-slsk--options_prefix

Type : string

Default : slsk-

The prefix which is appended to options names when they are used in the telnet/WEB interfaces

This section deals with the bittorent protocol

-BT--client_port

Type : int

Default : 6882

The port to bind the client to.

-BT--client_uid

Type : string

Default : (auto-generated)

The UID of this client.

-BT--options_prefix

Type : string

Default : BT-

The prefix which is appended to options names when they are used in the telnet/WEB interfaces.

-BT--delete_original

Type : boolean

Default : false

Should MLdonkey delete the file downloaded when splitting has been succesfull.

-BT--commit_in_subdir

Type : string

Default : BT

The subdirectory of temp/ where files should be moved to.

This section deals with the gnutella protocol

-GNUT--g1_max_ultrapeers

Type : int

Default : 5

Maximal number of ultrapeers connected on Gnutella1.

-GNUT--g2_max_ultrapeers

Type : int

Default : 5

Maximal number of ultrapeers connected on Gnutella2.

-GNUT--client_port

Type : int

Default : 6346

The port to bind the client to.

-GNUT--gnutella1_enabled

Type : boolean

Default : true

Do you want to support Gnutella1 protocol.

-GNUT--gnutella2_enabled

Type : boolean

Default : true

Do you want to support Gnutella2 protocol (not yet supported).

-GNUT--commit_in_subdir

Type : string

Default : Gnutella

The subdirectory of temp/ where files should be moved to.

-GNUT--max_known_ultrapeers

Type : int

Default : 100

Maximal number of ultrapeers remembered.

-GNUT--max_known_peers

Type : int

Default : 20

Maximal number of peers remembered.

-GNUT--server_connection_timeout

Type : int

Default : 10

Timeout when connecting to a server.

-GNUT--client_uid

Type : string

Default : (auto-generated)

The UID of this client.

-GNUT--options_prefix

Type : string

Default : GNUT-

The prefix which is appended to options names when they are used in the telnet/WEB interfaces.

-GNUT--max_available_slots

Type : int

Default : 5

The maximal number of slots for upload by Gnutella clients.

mlguistarter (1)

mlgui (1)

This manual page was written by Sylvain Le Gall <sylvain.le-gall@polytechnique.org> for the Debian GNU/Linux system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Lesser General Public License, Version 2.1 or any later version published by the Free Software Foundation; considering as source code all the file that enable the production of this manpage.

Sylvain Le Gall.