-v --verbose print out more tracing information that the default. By supplying this option twice, you will sometimes get even more information.

-q --quiet suppress all tracing and feedback information

-n --just-print perform a dry run, i.e. just print what would happen without actually performing the actions

--local do not recurse into subdirectories

--(n)autodepend default: true

automatically determine build-time and install-time (run-time) dependencies. Currently, this is only supported for Oz sources by looking at import and require sections.

--(n)requires default: true

automatically fetch and install other packages that the current one requires. This option is relevant both for building and for installing.

What you should remember here, is that -vn is your friend. Add -vn at the end of any ozmake invocation, and it will tell you in great detail what the command would do, without actually doing it.

--prefix=<PREFIX> default: ~/.oz

root of private installation area

--dir=<DIR> default: current directory

default directory for other options below

--builddir=<BUILDDIR> default: <DIR>

directory in which to build

--srcdir=<SRCDIR> default: <DIR>

directory where source files are located

--bindir=<BINDIR> default: <PREFIX>/bin

directory where bin targets are placed

--libroot=<LIBROOT> default: <PREFIX>/cache

root directory of cache into which lib targets are installed

--libdir=<LIBDIR> default: <LIBROOT>/<URI as cache path>

directory into which lib targets are installed

--docroot=<DOCROOT> default: <PREFIX>/doc

root directory into which doc targets are installed

--docdir=<DOCDIR> default: <DOCROOT>/<MOGUL as filename>

directory into which doc targets are installed

--extractdir=<EXTRACTDIR> default: <DIR>

directory into which to extract a package

--archive=<ARCHIVE> default: http://www.mozart-oz.org/mogul/pkg

URL of mogul archive from which packages can be downloaded

--moguldir=<MOGULDIR> directory in which are placed sub-directories for the user's contributions: a directory for packages, one for documentation, one for mogul database entries.

--mogulurl=<MOGULURL> url corresponding to the MOGULDIR directory

-m <FILE> --makefile=<FILE> default: <SRCDIR>/makefile.oz

location of makefile

-p <PKG> --package=<PKG>

file or URL of package. when creating a package, it should be a local filename. when extracting or installing, it can also be a URL or a mogul id; in the latter case, the package is automatically downloaded from the mogul archive

-V <VERSION> --packageversion=<VERSION>

this option is respected by --extract and --install .When --extract is given a MOGUL id and downloads the corresponding package from the MOGUL archive, it will look precisely for the given VERSION of the package. --install will simply check that the package to be installed really has this VERSION.

--database=<DB> default: <PREFIX>/DATABASE

base path of installed packages database. The database is saved in both pickled and textual format respectively in files DB.ozf and DB.txt

ozmake --help

-h --help print this information message

ozmake [--build]

build all targets

ozmake [--build] FILES...

build these target

-b --build this is the default. builds targets of the package

--optlevel=( none | debug | optimize ) default: optimize

select optimization level for compilation

-g --debug --optlevel=debug compile with debugging

-O --optimize --optlevel=optimize compile with full optimization. this is the default

--(n)gnu

is the C++ compiler the GNU compiler. this is determined automatically and allows a greater optimization level, namely passing -O3 rather than just -O to the compiler

--(n)fullbuild default: false

also build the src targets

--includedir DIR -I DIR tell the C++ compiler to additionally search DIR for include files

--(n)sysincludedirs default: true

tell the C++ compiler to additionally search (or not, if using --nosysincludedirs )the Mozart-specific include directories located in the global installation directory and in the user's private ~/.oz area.

--librarydir DIR -L DIR tell the C++ linker to additionally search DIR for libraries

--(n)syslibrarydirs default: true

tell the C++ linker to additionally search (or not, if using --nosyslibrarydirs )the Mozart-specific library directories located in the global installation directory and in the user's private ~/.oz area.

ozmake --install

install using the makefile

ozmake --install FILES...

install these targets using the makefile

ozmake --install --package=PKG

install package PKG

-i --install install targets of the package and updates the package database

--grade=( none | same | up | down | any | freshen ) default: none

what to do if this package is already installed? ozmake will compare version and dates, where the version is more significant. --grade=none signals an error --grade=same requires versions and dates to be the same --grade=up requires a package with newer version or same version and newer release date than the one installed --grade=down requires a package with older version or same version and older release date than the one installed --grade=any no conditions --grade=freshen install if the package is newer else do nothing

-U --upgrade equivalent to --install --grade=up

--downgrade equivalent to --install --grade=down

-A --anygrade equivalent to --install --grade=any

-F --freshen equivalent to --install --grade=freshen

--(n)replacefiles default: false

allow installation to overwrite files from other packages

-R --replace

equivalent to --install --grade=any --replacefiles

--(n)extendpackage default: false

whether to replace or extend the current installation of this package if any

-X --extend

equivalent to --install --grade=any --extendpackage

--(n)savedb default: true

save the updated database after installation

--includedocs --excludedocs default: --includedocs

whether to install the doc targets

--includelibs --excludelibs default: --includelibs

whether to install the lib targets

--includebins --excludebins default: --includebins

whether to install the bin targets

--(n)keepzombies default: false

whether to remove files left over from a previous installation of this package

--exe=( default | yes | no | both | multi ) default: default

the convention on Windows is that executables have a .exe,while on Unix they have no extension. The --exe option allows you to control the conventions used by ozmake when installing executables. --exe=default use the platform's convention --exe=yes use a .exe extension --exe=no use no extension --exe=both install all executables with .exe extension and without --exe=multi install executable functors for both Unix and Windows. The Unix versions are installed without extension, and the Windows versions are installed with .exe extension

ozmake --uninstall

uninstall package described by makefile

ozmake --uninstall --package=PKG

uninstall package named by mogul id PKG

-e --uninstall uninstall a package

ozmake --clean

ozmake --veryclean *~ *.ozf *.o *.so-* *.exe

remove files as specified by the makefile's clean and veryclean features. --veryclean implies --clean .

ozmake --create [--package=<FILE>]

create a package and save it in FILE.the files needed for the package are automatically computed from the makefile. If --package=<FILE> is not supplied, a default is computed using the mogul id (and possibly version number) found in the makefile.

--include(bins|libs|docs) --exclude(bins|libs|docs)

control which target types are included in the package

ozmake --publish

automatically takes care of all the steps necessary for creating/updating a package contributed by the user and making all necessary data available to the MOGUL librarian. See documentation for --mogul below.

ozmake --extract --package=<PKG>

extract the files from file or URL PKG.if PKG is a mogul id, then the package is automatically downloaded from the mogul archive

ozmake --list

list info for all packages in the installed package database

ozmake --list --package=<MOGUL>

list info for the installed package indentified by mogul id MOGUL

--linewidth=N default: 70

assume a line with of N characters

ozmake --config=put <OPTIONS>

record the given OPTIONS in ozmake's configuration database, and use them as defaults in subsequent invocations of ozmake unless explicitly overriden on the command line. For example: ozmake --config=put --prefix=/usr/local/oz saves /usr/local/oz as the default value for option --prefix

ozmake --config=delete <OPT1> ... <OPTn>

deletes some entries from the configuration database. For example: ozmake --config=delete prefix removes the default for --prefix from the configuration database

ozmake --config=list

lists the contents of ozmake's configuration database

the argument to --config can be abbreviated to any non-ambiguous prefix

If you choose to contribute packages to the MOGUL archive, ozmake --mogul=<ACTION> simplifies your task. It makes it easy for you to maintain a database of your contributions and to export them so that the MOGUL librarian may automatically find them. In fact, the simplest way is to use ozmake --publish which will take take care of all defails for you.

ozmake --mogul=put

update the user's database of own mogul contributions with the data for this contribution (in local directory)

ozmake --mogul=put --package=<PKG>

same as above, but using the package PKG explicitly given

ozmake --mogul=delete <MOG1> ... <MOGn>

remove the entries with mogul ids MOG1 through MOGn from the user's database of own contribution

ozmake --mogul=delete

remove entry for current contribution

ozmake --mogul=list

show the recorded data for all entries in the user's database of own mogul contributions

ozmake --mogul=list <MOG1> ... <MOGn>

show the recorded data for entries MOG1 through MOGn in the user's database of own mogul contributions

ozmake --mogul=export

write all necessary mogul entries for the user's own mogul contributions. These are the entries which will be read by the MOGUL librarian to automatically assemble the full MOGUL database.

The data for your contributions need to be made available to the MOGUL librarian on the WEB. You want to just update a local directory with your contributions, but, in order for the MOGUL librarian to find them, these directories must also be available through URLs on the WEB. Here are some options that allow you to control this correspondance, and for which you should set default using ozmake --config=put

--moguldir=<MOGULDIR>

--mogulurl=<MOGULURL> MOGULDIR is a directory which is also available on the WEB through url MOGULURL. MOGULDIR is intended as a root directory in which sub-directories for packages, documentation, and mogul entries will be found.

For those who really enjoy pain, ozmake has of course many options to shoot yourself in the foot. In the options below <ID> stands for the filename version of the package's mogul id (basically replace slashes by dashes). You can control where packages, their documentation and mogul database entries and stored and made available using the options below:

--mogulpkgdir=<MOGULPKGDIR> default: <MOGULDIR>/pkg/<ID>/

--mogulpkgurl=<MOGULPKGURL> default: <MOGULURL>/pkg/<ID>/

--moguldocdir=<MOGULDOCDIR> default: <MOGULDIR>/doc/<ID>/

--moguldocurl=<MOGULDOCURL> default: <MOGULURL>/doc/<ID>/

--moguldbdir=<MOGULDBDIR> default: <MOGULDIR>/db/<ID>/

--moguldburl=<MOGULDBURL> default: <MOGULURL>/db/<ID>/

Your contributions should all have mogul ids which are below the mogul id which you where granted for your section of the mogul database. For convenience, ozmake will attempt to guess the root mogul id of your section as soon as there are entries in your database of your own contributions. However, it is much preferable to tell ozmake about it using:

--mogulrootid=<ROOTID>

and to set it using ozmake --config=put --mogulrootid=<ROOTID>

ozmake knows how to build targets by looking at the target's extension:

Foo.exe

is an executable functor and is created from Foo.ozf

Foo.ozf

is a compiled functor and is created from Foo.oz

Foo.o

is a compiled C++ file and is created from Foo.cc

Foo.so

is a native functor and is created from Foo.o

Foo.cc

is a C++ source file

Foo.hh

is a C++ header file

Note that these are abstract targets. In particular, Foo.so really denotes the file Foo.so-<PLATFORM> where <PLATFORM> identifies the architecture and operating system where the package is built; for example: linux-i486.Also, when a bin target Foo.exe is installed, it is installed both as <BINDIR>/Foo.exe and <BINDIR>/Foo so that it can be invoked as Foo on both Windows and Unix platforms.

It is imperative that you respect the conventional use of extensions described here: ozmake permits no variation and supports no other extensions.

ozmake has built-in rules for building files. Occasionally, you may want to override the default rule for one or more targets. This is done with feature rule which contains a record mapping target to rule:

TARGET_FILE : TOOL(SOURCE_FILE)

the rule may also have a list of options:

TARGET_FILE : TOOL(SOURCE_FILE OPTIONS)

The tools supported by ozmake are ozc (Oz compiler), ozl (Oz linker), cc (C++ compiler), ld (C++ linker). The default rules are:

'Foo.exe' : ozl('Foo.ozf' [executable]) 'Foo.ozf' : ozc('Foo.oz') 'Foo.o' : cc('Foo.cc') 'Foo.so' : ld('Foo.o')

The tools support the following options:

ozc

executable

make the result executable

'define'(S)

define macro S.Same as -DS on the command line

ozl

executable

make the result executable

cc

include(DIR)

Similar to the usual C++ compiler option -IDIR. DIR is a virtual string

'define'(MAC)

Similar to the usual C++ compiler option -DMAC. MAC is a virtual string

ld

library(DIR)

Similar to the usual C++ linker option -lDIR. DIR is a virtual string

You might want to specify a rule to create a pre-linked library:

'Utils.ozf' : ozl('Foo.ozf')

or to create a non-prelinked executable:

'Foo.exe' : ozc('Foo.oz' [executable])

ozmake automatically determines whether targets needed to be rebuilt, e.g. because they are missing or if some source file needed to create them has been modified. The rules are used to determine dependencies between files. Sometimes this is insufficient e.g. because you use tool ozl (dependencies on imports), or insert in an Oz file, or #include in a C++ file. In this case you can specify additional dependencies using feature depends which is a record mapping targets to list of dependencies:

TARGET : [ FILES... ]

For example:

'Foo.o' : [ 'Foo.hh' 'Baz.hh' ]

or

'Foo.exe' : [ 'Lib1.ozf' 'Lib2.ozf' ]

During development, it is often convenient to be able to easily remove all junk and compiled files to obtain again a clean project directory. This is supported by ozmake --clean and ozmake --veryclean;the latter also implies the former. Files to be removed are specified by glob patterns where ? matches any 1 character and * matches a sequence of 0 or more characters. All files in BUILDDIR matching one such pattern is removed. There are built-in patterns, but ou can override them with features clean and veryclean which should be lists of glob patterns. For example the default clean glob patterns are:

clean : [ "*~" "*.ozf" "*.o" "*.so-*" "*.exe" ]

uri

feature uri indicates the URI where to install lib targets. For example:

uri : 'x-ozlib://mylib/XML'

states that all lib targets (e.g. Foo.ozf)will be installed under this URI so that they can also be imported from it, i.e.:

import MyFoo at 'x-ozlib://mylib/XML/Foo.ozf'

mogul

feature mogul is the mogul id uniquely identifying this package. It is used to identify the package in the database of installed packages, to create/publish the package, and to install its documention files.

author

feature author is a virtual string or list of virtual string resp. identifying the author or authors of the package. It is recommended to identify authors by their mogul id, however is is also possible to simply give their names. For example, the recommended way is:

author : 'mogul:/duchier'

but the following is also possible:

author : 'Denys Duchier'

released

feature released is a virtual string specifying the date and time of release in the following format:

released : "YYYY-MM-DD-HH:MM:SS"

time is optional. An appropriate release date using the currentdate and time is automatically inserted when invoking ozmake --create or ozmake --publish..

blurb

feature blurb contains a very short piece of text describing the package. This text should be just one line and is intended to be used as a title when the package is published in the mogul archive.

info_text

feature info_text contains a plain text description of the package. This is intended to be used as an abstract on the presentation page for the package in the mogul archive. It should be brief and informative, but should not attempt to document the package.

info_html

feature info_html is similar to info_text but contains HTML rather than plain text.

src

feature src indicates which targets should be considered source, i.e. in particular non-buildable. All targets mentioned in src should be mentioned in bin, lib,or doc too. The point of src is to support distributing packages with pre-built targets and without giving out the corresponding sources. You should not do this with native functors since they are platform dependent and not portable, but it can be a convenient means of distributing prebuilt Oz libraries. For example:

makefile( lib : [ 'Foo.ozf' ] src : [ 'Foo.ozf' ] uri : 'x-ozlib://mylib' mogul : 'mogul:/myname/foolib')

is a makefile for a package that distribute the precompiled Foo.ozf,but does not also distribute its source Foo.oz.Normally, when you build a package it simply checks that the src files are present but will not attempt to build them. If you have the sources, you can force building the src targets if necessary using --fullbuild..

subdirs

feature subdirs is a list of bare filenames representing subdirectories of the project. By default, when necessary, ozmake will recurse into these subdirectories. It is expected that each subdirectory should provide its own makefile. The mogul id is automatically inherited to subdirectories and the uri is automatically extended by appending the name of the subdirectory: thus submakefiles can be simpler since they don't need to be concerned with package-level features.

requires

feature requires is a list of module URIs or package MOGUL ids. These represent the external dependencies of the package. They are not yet used, but eventually ozmake will be able to use them to automate the recursive installation of other packages required by the one you are interested in.

categories

feature categories is a list of MOGUL categories to help categorize this package in the MOGUL archive.

version

feature version is used to provide a version string. This is a string that consist of integers separated by single dots, e.g. "2" or "3.1.7"..

provides

feature provides is used to override the default information about what the package provides, normally automatically computed from the bin and lib targets: it should be a list which contains a subset of these targets. The provides feature of a makefile does not override or otherwise affect its submakefiles: each makefile should separately override if it so desires. To state that a makefile does not officially provide any functors or executable application, you would add:

provides : nil

You should use the provides feature when your package contains both official public functors as well as purely implementational functors that are not part of the official public interface and should not be mentioned as provided by the package.