perldsc - Perl Data Structures Cookbook

The single feature most sorely lacking in the Perl programming language prior to its 5.0 release was complex data structures. Even without direct language support, some valiant programmers did manage to emulate them, but it was hard work and not for the faint of heart. You could occasionally get away with the CW$m{$AoA,$b} notation borrowed from awk in which the keys are actually more like a single concatenated string CW"$AoA$b", but traversal and sorting were difficult. More desperate programmers even hacked Perl's internal symbol table directly, a strategy that proved hard to develop and maintainto put it mildly.

The 5.0 release of Perl let us have complex data structures. You may now write something like this and all of a sudden, you'd have an array with three dimensions!

    for $x (1 .. 10) {
        for $y (1 .. 10) {
            for $z (1 .. 10) {
                $AoA[$x][$y][$z] =
                    $x ** $y + $z;
            }
        }
    }

Alas, however simple this may appear, underneath it's a much more elaborate construct than meets the eye!

How do you print it out? Why can't you say just CWprint @AoA? How do you sort it? How can you pass it to a function or get one of these back from a function? Is it an object? Can you save it to disk to read back later? How do you access whole rows or columns of that matrix? Do all the values have to be numeric?

As you see, it's quite easy to become confused. While some small portion of the blame for this can be attributed to the reference-based implementation, it's really more due to a lack of existing documentation with examples designed for the beginner.

This document is meant to be a detailed but understandable treatment of the many different sorts of data structures you might want to develop. It should also serve as a cookbook of examples. That way, when you need to create one of these complex data structures, you can just pinch, pilfer, or purloin a drop-in example from here.

Let's look at each of these possible constructs in detail. There are separate sections on each of the following:

* arrays of arrays

* hashes of arrays

* arrays of hashes

* hashes of hashes

* more elaborate constructs

But for now, let's look at general issues common to all these types of data structures.

The most important thing to understand about all data structures in Perl including multidimensional arraysis that even though they might appear otherwise, Perl CW@ARRAYs and CW%HASHes are all internally one-dimensional. They can hold only scalar values (meaning a string, number, or a reference). They cannot directly contain other arrays or hashes, but instead contain references to other arrays or hashes.

You can't use a reference to an array or hash in quite the same way that you would a real array or hash. For C or programmers unused to distinguishing between arrays and pointers to the same, this can be confusing. If so, just think of it as the difference between a structure and a pointer to a structure.

You can (and should) read more about references in the perlref(1) man page. Briefly, references are rather like pointers that know what they point to. (Objects are also a kind of reference, but we won't be needing them right awayif ever.) This means that when you have something which looks to you like an access to a two-or-more-dimensional array and/or hash, what's really going on is that the base type is merely a one-dimensional entity that contains references to the next level. It's just that you can use it as though it were a two-dimensional one. This is actually the way almost all C multidimensional arrays work as well.

    $array[7][12]                       # array of arrays
    $array[7]{string}                   # array of hashes
    $hash{string}[7]                    # hash of arrays
    $hash{string}{'another string'}     # hash of hashes

Now, because the top level contains only references, if you try to print out your array in with a simple print() function, you'll get something that doesn't look very nice, like this:

    @AoA = ( [2, 3], [4, 5, 7], [0] );
    print $AoA[1][2];
  7
    print @AoA;
  ARRAY(0)ARRAY(0)ARRAY(0)

That's because Perl doesn't (ever) implicitly dereference your variables. If you want to get at the thing a reference is referring to, then you have to do this yourself using either prefix typing indicators, like CW${$blah}, CW@{$blah}, CW@{$blah[$i]}, or else postfix pointer arrows, like CW$a->[3], CW$h->{fred}, or even CW$ob->method()->[3].

The two most common mistakes made in constructing something like an array of arrays is either accidentally counting the number of elements or else taking a reference to the same memory location repeatedly. Here's the case where you just get the count instead of a nested array:

    for $i (1..10) {
        @array = somefunc($i);
        $AoA[$i] = @array;      # WRONG!
    }

That's just the simple case of assigning an array to a scalar and getting its element count. If that's what you really and truly want, then you might do well to consider being a tad more explicit about it, like this:

    for $i (1..10) {
        @array = somefunc($i);
        $counts[$i] = scalar @array;
    }

Here's the case of taking a reference to the same memory location again and again:

    for $i (1..10) {
        @array = somefunc($i);
        $AoA[$i] = \@array;     # WRONG!
    }

So, what's the big problem with that? It looks right, doesn't it? After all, I just told you that you need an array of references, so by golly, you've made me one!

Unfortunately, while this is true, it's still broken. All the references in CW@AoA refer to the very same place, and they will therefore all hold whatever was last in CW@array! It's similar to the problem demonstrated in the following C program:

    #include <pwd.h>
    main() {
        struct passwd *getpwnam(), *rp, *dp;
        rp = getpwnam("root");
        dp = getpwnam("daemon");

        printf("daemon name is %s\nroot name is %s\n",
                dp->pw_name, rp->pw_name);
    }

Which will print

    daemon name is daemon
    root name is daemon

The problem is that both CWrp and CWdp are pointers to the same location in memory! In C, you'd have to remember to malloc() yourself some new memory. In Perl, you'll want to use the array constructor CW[] or the hash constructor CW{} instead. Here's the right way to do the preceding broken code fragments:

    for $i (1..10) {
        @array = somefunc($i);
        $AoA[$i] = [ @array ];
    }

The square brackets make a reference to a new array with a copy of what's in CW@array at the time of the assignment. This is what you want.

Note that this will produce something similar, but it's much harder to read:

    for $i (1..10) {
        @array = 0 .. $i;
        @{$AoA[$i]} = @array;
    }

Is it the same? Well, maybe soand maybe not. The subtle difference is that when you assign something in square brackets, you know for sure it's always a brand new reference with a new copy of the data. Something else could be going on in this new case with the CW@{$AoA[$i]}} dereference on the left-hand-side of the assignment. It all depends on whether CW$AoA[$i] had been undefined to start with, or whether it already contained a reference. If you had already populated CW@AoA with references, as in

    $AoA[3] = \@another_array;

Then the assignment with the indirection on the left-hand-side would use the existing reference that was already there:

    @{$AoA[3]} = @array;

Of course, this would have the interesting effect of clobbering CW@another_array. (Have you ever noticed how when a programmer says something is interesting, that rather than meaning intriguing, they're disturbingly more apt to mean that it's annoying, difficult, or both? :-)

So just remember always to use the array or hash constructors with CW[] or CW{}, and you'll be fine, although it's not always optimally efficient.

Surprisingly, the following dangerous-looking construct will actually work out fine:

    for $i (1..10) {
        my @array = somefunc($i);
        $AoA[$i] = \@array;
    }

That's because my() is more of a run-time statement than it is a compile-time declaration per se. This means that the my() variable is remade afresh each time through the loop. So even though it looks as though you stored the same variable reference each time, you actually did not! This is a subtle distinction that can produce more efficient code at the risk of misleading all but the most experienced of programmers. So I usually advise against teaching it to beginners. In fact, except for passing arguments to functions, I seldom like to see the gimme-a-reference operator (backslash) used much at all in code. Instead, I advise beginners that they (and most of the rest of us) should try to use the much more easily understood constructors CW[] and CW{} instead of relying upon lexical (or dynamic) scoping and hidden reference-counting to do the right thing behind the scenes.

In summary:

    $AoA[$i] = [ @array ];      # usually best
    $AoA[$i] = \@array;         # perilous; just how my() was that array?
    @{ $AoA[$i] } = @array;     # way too tricky for most programmers

Speaking of things like CW@{$AoA[$i]}, the following are actually the same thing:

    $aref->[2][2]       # clear
    $$aref[2][2]        # confusing

That's because Perl's precedence rules on its five prefix dereferencers (which look like someone swearing: CW$ @ * % &) make them bind more tightly than the postfix subscripting brackets or braces! This will no doubt come as a great shock to the C or programmer, who is quite accustomed to using CW*a[i] to mean what's pointed to by the i'th element of CWa. That is, they first take the subscript, and only then dereference the thing at that subscript. That's fine in C, but this isn't C.

The seemingly equivalent construct in Perl, CW$$aref[$i] first does the deref of CW$aref, making it take CW$aref as a reference to an array, and then dereference that, and finally tell you the i'th value of the array pointed to by CW$AoA. If you wanted the C notion, you'd have to write CW${$AoA[$i]} to force the CW$AoA[$i] to get evaluated first before the leading CW$ dereferencer. If this is starting to sound scarier than it's worth, relax. Perl has some features to help you avoid its most common pitfalls. The best way to avoid getting confused is to start every program like this:

    #!/usr/bin/perl -w
    use strict;

This way, you'll be forced to declare all your variables with my() and also disallow accidental symbolic dereferencing. Therefore if you'd done this:

    my $aref = [
        [ "fred", "barney", "pebbles", "bambam", "dino", ],
        [ "homer", "bart", "marge", "maggie", ],
        [ "george", "jane", "elroy", "judy", ],
    ];

    print $aref[2][2];

The compiler would immediately flag that as an error at compile time, because you were accidentally accessing CW@aref, an undeclared variable, and it would thereby remind you to write instead:

    print $aref->[2][2]

Before version 5.002, the standard Perl debugger didn't do a very nice job of printing out complex data structures. With 5.002 or above, the debugger includes several new features, including command line editing as well as the CWx command to dump out complex data structures. For example, given the assignment to CW$AoA above, here's the debugger output:

    DB<1> x $AoA
    $AoA = ARRAY(0)
       0  ARRAY(0)
          0  'fred'
          1  'barney'
          2  'pebbles'
          3  'bambam'
          4  'dino'
       1  ARRAY(0)
          0  'homer'
          1  'bart'
          2  'marge'
          3  'maggie'
       2  ARRAY(0)
          0  'george'
          1  'jane'
          2  'elroy'
          3  'judy'

Presented with little comment (these will get their own manpages someday) here are short code examples illustrating access of various types of data structures.

 @AoA = (
        [ "fred", "barney" ],
        [ "george", "jane", "elroy" ],
        [ "homer", "marge", "bart" ],
      );

 # reading from file
 while ( <> ) {
     push @AoA, [ split ];
 }

 # calling a function
 for $i ( 1 .. 10 ) {
     $AoA[$i] = [ somefunc($i) ];
 }

 # using temp vars
 for $i ( 1 .. 10 ) {
     @tmp = somefunc($i);
     $AoA[$i] = [ @tmp ];
 }

 # add to an existing row
 push @{ $AoA[0] }, "wilma", "betty";

 # one element
 $AoA[0][0] = "Fred";

 # another element
 $AoA[1][1] =~ s/(\w)/\u$1/;

 # print the whole thing with refs
 for $aref ( @AoA ) {
     print "\t [ @$aref ],\n";
 }

 # print the whole thing with indices
 for $i ( 0 .. $#AoA ) {
     print "\t [ @{$AoA[$i]} ],\n";
 }

 # print the whole thing one at a time
 for $i ( 0 .. $#AoA ) {
     for $j ( 0 .. $#{ $AoA[$i] } ) {
         print "elt $i $j is $AoA[$i][$j]\n";
     }
 }

 %HoA = (
        flintstones        => [ "fred", "barney" ],
        jetsons            => [ "george", "jane", "elroy" ],
        simpsons           => [ "homer", "marge", "bart" ],
      );

 # reading from file
 # flintstones: fred barney wilma dino
 while ( <> ) {
     next unless s/^(.*?):\s*//;
     $HoA{$1} = [ split ];
 }

 # reading from file; more temps
 # flintstones: fred barney wilma dino
 while ( $line = <> ) {
     ($who, $rest) = split /:\s*/, $line, 2;
     @fields = split ' ', $rest;
     $HoA{$who} = [ @fields ];
 }

 # calling a function that returns a list
 for $group ( "simpsons", "jetsons", "flintstones" ) {
     $HoA{$group} = [ get_family($group) ];
 }

 # likewise, but using temps
 for $group ( "simpsons", "jetsons", "flintstones" ) {
     @members = get_family($group);
     $HoA{$group} = [ @members ];
 }

 # append new members to an existing family
 push @{ $HoA{"flintstones"} }, "wilma", "betty";

 # one element
 $HoA{flintstones}[0] = "Fred";

 # another element
 $HoA{simpsons}[1] =~ s/(\w)/\u$1/;

 # print the whole thing
 foreach $family ( keys %HoA ) {
     print "$family: @{ $HoA{$family} }\n"
 }

 # print the whole thing with indices
 foreach $family ( keys %HoA ) {
     print "family: ";
     foreach $i ( 0 .. $#{ $HoA{$family} } ) {
         print " $i = $HoA{$family}[$i]";
     }
     print "\n";
 }

 # print the whole thing sorted by number of members
 foreach $family ( sort { @{$HoA{$b}} <=> @{$HoA{$a}} } keys %HoA ) {
     print "$family: @{ $HoA{$family} }\n"
 }

 # print the whole thing sorted by number of members and name
 foreach $family ( sort {
                            @{$HoA{$b}} <=> @{$HoA{$a}}
                                        ||
                                    $a cmp $b
            } keys %HoA )
 {
     print "$family: ", join(", ", sort @{ $HoA{$family} }), "\n";
 }

 @AoH = (
        {
            Lead     => "fred",
            Friend   => "barney",
        },
        {
            Lead     => "george",
            Wife     => "jane",
            Son      => "elroy",
        },
        {
            Lead     => "homer",
            Wife     => "marge",
            Son      => "bart",
        }
  );

 # reading from file
 # format: LEAD=fred FRIEND=barney
 while ( <> ) {
     $rec = {};
     for $field ( split ) {
         ($key, $value) = split /=/, $field;
         $rec->{$key} = $value;
     }
     push @AoH, $rec;
 }

 # reading from file
 # format: LEAD=fred FRIEND=barney
 # no temp
 while ( <> ) {
     push @AoH, { split /[\s+=]/ };
 }

 # calling a function  that returns a key/value pair list, like
 # "lead","fred","daughter","pebbles"
 while ( %fields = getnextpairset() ) {
     push @AoH, { %fields };
 }

 # likewise, but using no temp vars
 while (<>) {
     push @AoH, { parsepairs($_) };
 }

 # add key/value to an element
 $AoH[0]{pet} = "dino";
 $AoH[2]{pet} = "santa's little helper";

 # one element
 $AoH[0]{lead} = "fred";

 # another element
 $AoH[1]{lead} =~ s/(\w)/\u$1/;

 # print the whole thing with refs
 for $href ( @AoH ) {
     print "{ ";
     for $role ( keys %$href ) {
         print "$role=$href->{$role} ";
     }
     print "}\n";
 }

 # print the whole thing with indices
 for $i ( 0 .. $#AoH ) {
     print "$i is { ";
     for $role ( keys %{ $AoH[$i] } ) {
         print "$role=$AoH[$i]{$role} ";
     }
     print "}\n";
 }

 # print the whole thing one at a time
 for $i ( 0 .. $#AoH ) {
     for $role ( keys %{ $AoH[$i] } ) {
         print "elt $i $role is $AoH[$i]{$role}\n";
     }
 }

 %HoH = (
        flintstones => {
                lead      => "fred",
                pal       => "barney",
        },
        jetsons     => {
                lead      => "george",
                wife      => "jane",
                "his boy" => "elroy",
        },
        simpsons    => {
                lead      => "homer",
                wife      => "marge",
                kid       => "bart",
        },
 );

 # reading from file
 # flintstones: lead=fred pal=barney wife=wilma pet=dino
 while ( <> ) {
     next unless s/^(.*?):\s*//;
     $who = $1;
     for $field ( split ) {
         ($key, $value) = split /=/, $field;
         $HoH{$who}{$key} = $value;
     }

 # reading from file; more temps
 while ( <> ) {
     next unless s/^(.*?):\s*//;
     $who = $1;
     $rec = {};
     $HoH{$who} = $rec;
     for $field ( split ) {
         ($key, $value) = split /=/, $field;
         $rec->{$key} = $value;
     }
 }

 # calling a function  that returns a key,value hash
 for $group ( "simpsons", "jetsons", "flintstones" ) {
     $HoH{$group} = { get_family($group) };
 }

 # likewise, but using temps
 for $group ( "simpsons", "jetsons", "flintstones" ) {
     %members = get_family($group);
     $HoH{$group} = { %members };
 }

 # append new members to an existing family
 %new_folks = (
     wife => "wilma",
     pet  => "dino",
 );

 for $what (keys %new_folks) {
     $HoH{flintstones}{$what} = $new_folks{$what};
 }

 # one element
 $HoH{flintstones}{wife} = "wilma";

 # another element
 $HoH{simpsons}{lead} =~ s/(\w)/\u$1/;

 # print the whole thing
 foreach $family ( keys %HoH ) {
     print "$family: { ";
     for $role ( keys %{ $HoH{$family} } ) {
         print "$role=$HoH{$family}{$role} ";
     }
     print "}\n";
 }

 # print the whole thing  somewhat sorted
 foreach $family ( sort keys %HoH ) {
     print "$family: { ";
     for $role ( sort keys %{ $HoH{$family} } ) {
         print "$role=$HoH{$family}{$role} ";
     }
     print "}\n";
 }

 # print the whole thing sorted by number of members
 foreach $family ( sort { keys %{$HoH{$b}} <=> keys %{$HoH{$a}} } keys %HoH ) {
     print "$family: { ";
     for $role ( sort keys %{ $HoH{$family} } ) {
         print "$role=$HoH{$family}{$role} ";
     }
     print "}\n";
 }

 # establish a sort order (rank) for each role
 $i = 0;
 for ( qw(lead wife son daughter pal pet) ) { $rank{$_} = ++$i }

 # now print the whole thing sorted by number of members
 foreach $family ( sort { keys %{ $HoH{$b} } <=> keys %{ $HoH{$a} } } keys %HoH ) {
     print "$family: { ";
     # and print these according to rank order
     for $role ( sort { $rank{$a} <=> $rank{$b} }  keys %{ $HoH{$family} } ) {
         print "$role=$HoH{$family}{$role} ";
     }
     print "}\n";
 }

Here's a sample showing how to create and use a record whose fields are of many different sorts:

     $rec = {
         TEXT      => $string,
         SEQUENCE  => [ @old_values ],
         LOOKUP    => { %some_table },
         THATCODE  => \&some_function,
         THISCODE  => sub { $_[0] ** $_[1] },
         HANDLE    => \*STDOUT,
     };

     print $rec->{TEXT};

     print $rec->{SEQUENCE}[0];
     $last = pop @ { $rec->{SEQUENCE} };

     print $rec->{LOOKUP}{"key"};
     ($first_k, $first_v) = each %{ $rec->{LOOKUP} };

     $answer = $rec->{THATCODE}->($arg);
     $answer = $rec->{THISCODE}->($arg1, $arg2);

     # careful of extra block braces on fh ref
     print { $rec->{HANDLE} } "a string\n";

     use FileHandle;
     $rec->{HANDLE}->autoflush(1);
     $rec->{HANDLE}->print(" a string\n");

     %TV = (
        flintstones => {
            series   => "flintstones",
            nights   => [ qw(monday thursday friday) ],
            members  => [
                { name => "fred",    role => "lead", age  => 36, },
                { name => "wilma",   role => "wife", age  => 31, },
                { name => "pebbles", role => "kid",  age  =>  4, },
            ],
        },

        jetsons     => {
            series   => "jetsons",
            nights   => [ qw(wednesday saturday) ],
            members  => [
                { name => "george",  role => "lead", age  => 41, },
                { name => "jane",    role => "wife", age  => 39, },
                { name => "elroy",   role => "kid",  age  =>  9, },
            ],
         },

        simpsons    => {
            series   => "simpsons",
            nights   => [ qw(monday) ],
            members  => [
                { name => "homer", role => "lead", age  => 34, },
                { name => "marge", role => "wife", age => 37, },
                { name => "bart",  role => "kid",  age  =>  11, },
            ],
         },
      );

     # reading from file
     # this is most easily done by having the file itself be
     # in the raw data format as shown above.  perl is happy
     # to parse complex data structures if declared as data, so
     # sometimes it's easiest to do that

     # here's a piece by piece build up
     $rec = {};
     $rec->{series} = "flintstones";
     $rec->{nights} = [ find_days() ];

     @members = ();
     # assume this file in field=value syntax
     while (<>) {
         %fields = split /[\s=]+/;
         push @members, { %fields };
     }
     $rec->{members} = [ @members ];

     # now remember the whole thing
     $TV{ $rec->{series} } = $rec;

     ###########################################################
     # now, you might want to make interesting extra fields that
     # include pointers back into the same data structure so if
     # change one piece, it changes everywhere, like for example
     # if you wanted a {kids} field that was a reference
     # to an array of the kids' records without having duplicate
     # records and thus update problems.
     ###########################################################
     foreach $family (keys %TV) {
         $rec = $TV{$family}; # temp pointer
         @kids = ();
         for $person ( @{ $rec->{members} } ) {
             if ($person->{role} =~ /kid|son|daughter/) {
                 push @kids, $person;
             }
         }
         # REMEMBER: $rec and $TV{$family} point to same data!!
         $rec->{kids} = [ @kids ];
     }

     # you copied the array, but the array itself contains pointers
     # to uncopied objects. this means that if you make bart get
     # older via

     $TV{simpsons}{kids}[0]{age}++;

     # then this would also change in
     print $TV{simpsons}{members}[2]{age};

     # because $TV{simpsons}{kids}[0] and $TV{simpsons}{members}[2]
     # both point to the same underlying anonymous hash table

     # print the whole thing
     foreach $family ( keys %TV ) {
         print "the $family";
         print " is on during @{ $TV{$family}{nights} }\n";
         print "its members are:\n";
         for $who ( @{ $TV{$family}{members} } ) {
             print " $who->{name} ($who->{role}), age $who->{age}\n";
         }
         print "it turns out that $TV{$family}{lead} has ";
         print scalar ( @{ $TV{$family}{kids} } ), " kids named ";
         print join (", ", map { $_->{name} } @{ $TV{$family}{kids} } );
         print "\n";
     }

You cannot easily tie a multilevel data structure (such as a hash of hashes) to a dbm file. The first problem is that all but GDBM and Berkeley DB have size limitations, but beyond that, you also have problems with how references are to be represented on disk. One experimental module that does partially attempt to address this need is the MLDBM module. Check your nearest CPAN site as described in perlmodlib for source code to MLDBM.

perlref(1), perllol(1), perldata(1), perlobj(1)

Tom Christiansen <tchrist@perl.com>

Last update: Wed Oct 23 04:57:50 MET DST 1996