man prs () - print an SCCS file (DEVELOPMENT)

NAME

prs - print an SCCS file (DEVELOPMENT)

SYNOPSIS

prs [-a][-d dataspec][-r[SID]] file...

prs [ -e| -l] -c cutoff [-d dataspec] file...

prs [ -e| -l] -r[SID][-d dataspec]file...

DESCRIPTION

The prs utility shall write to standard output parts or all of an SCCS file in a user-supplied format.

OPTIONS

The prs utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines, except that the -r option has an optional option-argument. This optional option-argument cannot be presented as a separate argument. The following options shall be supported:

-d dataspec
Specify the output data specification. The dataspec shall be a string consisting of SCCS file data keywords (see Data Keywords ) interspersed with optional user-supplied text.
-r[SID]
Specify the SCCS identification string (SID) of a delta for which information is desired. If no SID option-argument is specified, the SID of the most recently created delta shall be assumed.
-e
Request information for all deltas created earlier than and including the delta designated via the -r option or the date-time given by the -c option.
-l
Request information for all deltas created later than and including the delta designated via the -r option or the date-time given by the -c option.
-c cutoff
Indicate the cutoff date-time, in the form: 
YY[MM[DD[HH[MM[SS]]]]]



For the YY component, values in the range [69,99] shall refer
to years 1969 to 1999 inclusive, and values in the range
[00,68] shall refer to years 2000 to 2068 inclusive. 

Note:

It is expected that in a future version of IEEE Std 1003.1-2001
the default century inferred from a 2-digit year will
change. (This would apply to all commands accepting a 2-digit year
as input.)



No changes (deltas) to the SCCS file that were created after the specified
cutoff date-time shall be included in the
output. Units omitted from the date-time default to their maximum
possible values; for example, -c 7502 is equivalent
to -c 750228235959.

-a

Request writing of information for both removed-that is, delta
type=
R (see rmdel )- and existing-that is, delta
type= D,- deltas. If the -a option is not specified,
information for existing deltas only shall be
provided.


OPERANDS

The following operand shall be supported:

file

A pathname of an existing SCCS file or a directory. If file
is a directory, the prs utility shall behave as
though each file in the directory were specified as a named file,
except that non-SCCS files (last component of the pathname does
not begin with s.) and unreadable files shall be silently ignored.


If exactly one file operand appears, and it is '-' , the
standard input shall be read; each line of the standard
input shall be taken to be the name of an SCCS file to be processed.
Non-SCCS files and unreadable files shall be silently
ignored.


STDIN

The standard input shall be a text file used only when the file
operand is specified as '-' . Each line of the
text file shall be interpreted as an SCCS pathname.

INPUT FILES

Any SCCS files displayed are files of an unspecified format.

ENVIRONMENT VARIABLES

The following environment variables shall affect the execution of
prs:

LANG

Provide a default value for the internationalization variables that
are unset or null. (See the Base Definitions volume of
IEEE Std 1003.1-2001, Section 8.2, Internationalization Variables
for
the precedence of internationalization variables used to determine
the values of locale categories.)

LC_ALL

If set to a non-empty string value, override the values of all the
other internationalization variables.

LC_CTYPE

Determine the locale for the interpretation of sequences of bytes
of text data as characters (for example, single-byte as
opposed to multi-byte characters in arguments and input files).

LC_MESSAGES

Determine the locale that should be used to affect the format and
contents of diagnostic messages written to standard
error.

NLSPATH

Determine the location of message catalogs for the processing of LC_MESSAGES
.


ASYNCHRONOUS EVENTS

Default.

STDOUT

The standard output shall be a text file whose format is dependent
on the data keywords specified with the -d option.

Data Keywords

Data keywords specify which parts of an SCCS file shall be retrieved
and output. All parts of an SCCS file have an associated
data keyword. A data keyword may appear in a dataspec multiple
times.


The information written by prs shall consist of:

 1.

The user-supplied text



 2.

Appropriate values (extracted from the SCCS file) substituted for
the recognized data keywords in the order of appearance in the
dataspec




The format of a data keyword value shall either be simple ( 'S'
), in which keyword substitution is direct, or
multi-line ( 'M' ).


User-supplied text shall be any text other than recognized data keywords.
A <tab> shall be specified by '\t' and
<newline> by '\n' . When the -r option is not specified,
the default dataspec shall be:


:PN::\n\n




and the following dataspec shall be used for each selected delta:


:Dt:\t:DL:\nMRs:\n:MR:COMMENTS:\n:C:


center;c1 s1 s1 s1 s.
SCCS File Data Keywords
l l l l l.
Keyword	Data Item	File Section	Value	Format
:Dt:	Delta information	Delta Table	See below*	S
:DL:	Delta line statistics	"	:Li:/:Ld:/:Lu:	S
:Li:	Lines inserted by Delta	"	nnnnn***	S
:Ld:	Lines deleted by Delta	"	nnnnn***	S
:Lu:	Lines unchanged by Delta	"	nnnnn***	S
:DT:	Delta type	"	D or R	S
:I:	SCCS ID string (SID)	"	See below**	S
:R:	Release number	"	nnnn	S
:L:	Level number	"	nnnn	S
:B:	Branch number	"	nnnn	S
:S:	Sequence number	"	nnnn	S
:D:	Date delta created	"	:Dy:/:Dm:/:Dd:	S
:Dy:	Year delta created	"	nn	S
:Dm:	Month delta created	"	nn	S
:Dd:	Day delta created	"	nn	S
:T:	Time delta created	"	:Th:::Tm:::Ts:	S
:Th:	Hour delta created	"	nn	S
:Tm:	Minutes delta created	"	nn	S
:Ts:	Seconds delta created	"	nn	S
:P:	Programmer who created Delta	"	logname	S
:DS:	Delta sequence number	"	nnnn	S
:DP:	Predecessor Delta sequence	"	nnnn	S
 	number	 	 	 
:DI:	Sequence number of deltas	"	:Dn:/:Dx:/:Dg:	S
 	included, excluded, or ignored	 	 	 
:Dn:	Deltas included (sequence #)	"	:DS: :DS: ...	S
:Dx:	Deltas excluded (sequence #)	"	:DS: :DS: ...	S
:Dg:	Deltas ignored (sequence #)	"	:DS: :DS: ...	S
:MR:	MR numbers for delta	"	text	M
:C:	Comments for delta	"	text	M
:UN:	User names	User Names	text	M
:FL:	Flag list	Flags	text	M
:Y:	Module type flag	"	text	S
:MF:	MR validation flag	"	yes or no	S
:MP:	MR validation program name	"	text	S
:KF:	Keyword error, warning flag	"	yes or no	S
:KV:	Keyword validation string	"	text	S
:BF:	Branch flag	"	yes or no	S
:J:	Joint edit flag	"	yes or no	S
:LK:	Locked releases	"	:R: ...	S
:Q:	User-defined keyword	"	text	S
:M:	Module name	"	text	S
:FB:	Floor boundary	"	:R:	S
:CB:	Ceiling boundary	"	:R:	S
:Ds:	Default SID	"	:I:	S
:ND:	Null delta flag	"	yes or no	S
:FD:	File descriptive text	Comments	text	M
:BD:	Body	Body	text	M
:GB:	Gotten body	"	text	M
:W:	A form of what string	N/A	:Z::M:\t:I:	S
:A:	A form of what string	N/A	:Z::Y: :M: :I::Z:	S
:Z:	what string delimiter	N/A	@(#)	S
:F:	SCCS filename	N/A	text	S
:PN:	SCCS file pathname	N/A	text	S

*

:Dt:= :DT: :I: :D: :T: :P: :DS: :DP:

**

:R:.:L:.:B:.:S: if the delta is a branch delta ( :BF:==
yes)



:R:.:L: if the delta is not a branch delta ( :BF:== no)

***

The line statistics are capped at 99999. For example, if 100000 lines
were unchanged in a certain revision, :Lu: shall
produce the value 99999.


STDERR

The standard error shall be used only for diagnostic messages.

OUTPUT FILES

None.

EXTENDED DESCRIPTION

None.

EXIT STATUS

The following exit values shall be returned:

 0

Successful completion.

>0

An error occurred.


CONSEQUENCES OF ERRORS

Default.


The following sections are informative.

APPLICATION USAGE

None.

EXAMPLES
 1.

The following example:


prs -d "User Names for :F: are:\n:UN:" s.file




might write to standard output:


User Names for s.file are:
xyz
131
abc





 2.

The following example:


prs -d "Delta for pgm :M:: :I: - :D: By :P:" -r s.file




might write to standard output:


Delta for pgm main.c: 3.7 - 77/12/01 By cas





 3.

As a special case:


prs s.file




might write to standard output:


s.file:
<blank line>
D 1.1 77/12/01 00:00:00 cas 1 000000/00000/00000
MRs:
bl78-12345
bl79-54321
COMMENTS:
this is the comment line for s.file initial delta
<blank line>




for each delta table entry of the D type. The only option allowed
to be used with this special case is the -a
option.



RATIONALE

None.

FUTURE DIRECTIONS

None.

SEE ALSO

admin , delta , get , what

COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online at
http://www.opengroup.org/unix/online.html .