poster - Scale and tile a postscript image to print on multiple pages

poster <options> infile

Poster can be used to create a large poster by building it from multiple pages and/or printing it on large media. It expects as input a generic (encapsulated) postscript file, normally printing on a single page. The output is again a postscript file, maybe containing multiple pages together building the poster. The output pages bear cutmarks and have slightly overlapping images for easier assembling. The input picture will be scaled to obtain the desired size.

The program uses a brute-force method: it copies the entire input file for each output page, hence the output file can be very large. Since the program does not really bother about the input file contents, it clearly works for both black-and-white and color postscript.

To control its operation, you need to specify either the size of the desired poster or a scale factor for the image:

-

Given the poster size, it calculates the required number of sheets to print on, and from that a scale factor to fill these sheets optimally with the input image.

-

Given a scale factor, it derives the required number of pages from the input image size, and positions the scaled image centered on this area.

Its input file should best be a real `Encapsulated Postscript' file (often denoted with the extension .eps or .epsf). Such files can be generated from about all current drawing applications, and text processors like Word, Interleaf and Framemaker.

However poster tries to behave properly also on more relaxed, general postscript files containing a single page definition. Proper operation is obtained for instance on pages generated by (La)TeX and (g)troff.

The media to print on can be selected independently from the input image size and/or the poster size. Poster will determine by itself whether it is beneficial to rotate the output image on the media.

To preview the output results of poster and/or to (re-)print individual output pages, you should use a postscript previewer like ghostview(1).

-v

Be verbose. Tell about scaling, rotation and number of pages.

Default is silent operation.

-f

Ask manual media feed on the plotting/printing device, instead of using its standard paper tray.

Default is adhering to the device settings.

-i <box>

Specify the size of the input image.

Default is reading the image size from the `%%BoundingBox' specification in the input file header.

-m <box>

Specify the desired media size to print on. See below for <box>.

The default is obtained from the PAPERCONF environment variable. If it is not set, it is read from the file whose name is in the PAPERSIZE environment variable. If that too is not set, the default is read from the file /etc/papersize. See papersize(5) for a full description of the format of the config file.

-p <box>

Specify the poster size. See below for <box>. Since poster will autonomously choose for rotation, always specify a `portrait' poster size (i.e. higher then wide).

If you don't give the -s option, the default poster size is identical to the media size.

-s <number>

Specify a linear scaling factor to produce the poster. Together with the input image size and optional margins, this induces an output poster size. So don't specify both -s and -p.

Default is deriving the scale factor to fit a given poster size.

-c <box> or -c <number>%

Specify the cut margin. This is the distance between the cutmarks and the paper edge. If the output is really tiled on multiple sheets, the cut marks indicate where to cut the paper for assembly. This margin must be big enough to cover the non-printable margin which almost all printers have. For <box> see below.

Default is 5%. Only when you specify identical poster and media sizes, the default cut margin becomes 0, effectively removing the cutmarks.

-w <box> or -w <number>%

Specify a white margin around the output image.

In the `ideal' situation (when an input `eps' file specifies an exact BoundingBox in its header), the output image will be scaled exactly to the edges of the resulting poster (minus cut margin). If you desire a certain margin to remain around the picture after poster assembly, you can specify this with `-w'.

(This option is actually redundant, since you can obtain the same result using -s or -i. However some might find this more convenient.)

Default is 0.

-P <pagespec>

Specify which pages of the poster to print. It consists of a comma-separated list of single pages or page ranges (using the dash). The order in which page number appears determines the final page order in the result PostScript file. Page numbering starts at 1, from left to right and bottom-up.

Examples: 1-2 or 1,3-4,7

-o <outputfile>

Specify the name of the file to write the output into.

(Only added for those poor people who cannot specify output redirection from their command line due to a silly OS.)

Default is writing to standard output.

The <box> mentioned above is a specification of horizontal and vertical size. Only in combination with the `-i' option, the program also understands the offset specification in the <box>.

In general: <box> = [<multiplier>][<offset>]<unit>

with multipier and offset being specified optionally. <multiplier> = <number>*<number>

<offset> = +<number>,<number>

<unit> = <medianame> or <distancename>

Many international media names are recognised by the program, in upper and lower case, and can be shortened to their first few characters, as long as unique. For instance `A0', `Let'.

Distance names are like `cm', `i', `ft'.

The following command prints an A4 input file on 8 A3 pages, forming an A0 poster: poster -v -iA4 -mA3 -pA0 infile >outfile

The next command prints an eps input image on a poster of 3x3 Letter pages: poster -v -mLet -p3x3Let image.eps > outfile

The next command enlarges an eps input image to print on a large-media A0 capable device, maintaining 2 inch margins: poster -v -mA0 -w2x2i image.eps > outfile

Enlarge a postscript image exactly 4 times, print on the default A4 media, and let poster determine the number of pages required: poster -v -s4 image.eps > outfile

Scale a postscript image to a poster of about 1 square meter, printing on `Legal' media, maintaining a 10% of `Legal' size as white margin around the poster. poster -v -mLegal -p1x1m -w10% infile.ps >outfile

I get a blurry image and/or interference patterns

Can I select only a small part of a given input picture?

Poster doesn't seem to work properly, output pages are empty

If I ask for a 50x50cm poster, it always generates something bigger

I want to keep the white space around the poster as in my original

Our preferred method for the assembly of a poster from multiple sheets is as follows:

-

Arrange the sheets in the proper order on a large table or on the floor.

-

Remove from all sheets, except from those in the leftmost column or bottom row, their left and bottom cutmargin.

-

In left-to-right and bottom-to-top order, glue the right (and top) cutmargin and stick the right (and upper) neighbouring page on top of that.

-

Turn the glued-together poster face bottom, and put adhesive tape on the sheet edges (on the backside of the poster) for more strength.

-

Remove the remaining cutmargin around the poster.

For postscript level-2 capable printers/plotters, which is about all modern postscript devices today, poster will send device settings in its output file. This consists of a `setpagedevice' call, setting:

-

the media size.

This is required for all printers I know to get correct behaviour on different media/picture sizes.

-

duplexing off.

Some printers will otherwise perform double-side printing by default. Clearly that is not what you want to print a poster.

-

manual media feed.

This is given only when poster was executed with the `-f' command line option. This is a convenient feature if you want to print your job on different media than normally installed in the paper tray, and you are submitting your job through a multi-user networking and spooling environment.

These settings cause proper device behaviour, without the need to manually interact with the printer settings, and has been here locally tested to work on devices like the HP300XL and HP650C.

The settings thus passed in the postscript file, will affect the device for this job only.

Poster will generate its own DSC header and other DSC lines in the output file, according the `Document Structuring Conventions - version 3.0', as written down in the `Postscript Language Reference Manual, 2nd ed.' from Adobe Systems Inc, Addison Wesley Publ comp., 1990.

It will copy any `%%Document...' line from the input file DSC header to its own header output. This is used here in particular for required nonresident fonts.

However the copy(s) of the input file included in the output, are stripped from all lines starting with a `%', since they tend to disturb our `ghostview' previewer and take useless space anyhow.

ghostview(1), papersize(5)

Jos van Eijndhoven (email: J.T.J.v.Eijndhoven@ele.tue.nl)
Design Automation Section (http://www.es.ele.tue.nl)
Dept. of Elec. Eng.
Eindhoven Univ of Technology
The Netherlands
24 August, 1995