proxycheck - open proxy server checker

proxycheck options host[:proto_port_spec]...

proxycheck is a simple open proxy checking tool which is capable to quickly discovery open proxy servers on many hosts. It's primary goal is to detect an open proxy server in order to prevent it's abuse by various "bad guys", mostly spammers. Having a wide-open proxy service running on a publicaly accessible network is a very bad idea nowadays, and proxycheck may be used to find such system in order to be able to either secure a system, or to refuse servicing it until it will be secured properly.

In order to determine if a given host is running an open proxy service, proxycheck tries to connect to a given destination system via a host and perform some actions, trying to talk with the destination system. If a talk is successeful, proxycheck assumes the proxy service is running and wide-open.

proxycheck supports all commonly used proxy protocols, namely, HTTP CONNECT method, SOCKS versions 4 and 5, and Wingate "telnet"style proxies. In future, support for more protocols may be added.

Please note that with current number of various trojan horses cicrulating around, each opening a proxy on a random port, it is not really enouth to probe for standard (in whatever reason) ports built into the proxycheck. Instead, it is highly recommended to use a list of currently active ports maintained by several people on the 'net.

The following command-line options are recognized:

-h

print a short help and exit.

-v

increase the verbosity level. All debugging messages will go to standard error stream.

-d deshost:destport (required)

try to establish a proxied connection to the given dsthost, port dstport. This option is required.

-c check[:params] (required)

the "method" proxycheck will use when talking to a destination system to determine if a proxy is open or not. Interpretation of params is check-dependant. This option is required. Several methods are available:

chat:sendstr:expectstr

Try to perform simple "chat" with the destination system: send the string given as sendstr and wait for expectstr on output. If sendstr is empty, proxycheck will send the proxy parameters in the form

   protocol:ip-address:portnumber

to the remote system. Proxy assumed to be open if expectstr is found.

dsbl (no parameters accepted)

try to submit all found proxies to the DSBL.org-like system, see http://dsbl.org/ for more details. All the parameters required (username, password, recipient address, cookie server, ...) are expected to be found in environment variables. Run proxycheck with -h option to see a list of recognized variables and their default values. By default, proxycheck will anonimously submit all found proxies to unconfirmed.dsbl.org (which isn't very useful). For trusted DSBL user, at least DSBL_USER and DSBL_PASS variables should be set properly.

-p proto_port_spec

specifies protocol and ports to connect to. If not given, proxycheck will try it's built-in default list. This option may be specified more than once. See below for proto_port_spec. If proto_port_spec is specified for a single host to check, it applies to that host only, and no protocols/ports in default list will be checked for that host.

-D

do not reset default port list when using -p option, but prepend new ports to it instead.

-a

use more "advanced" ports/protocols. The more -a's given, the more ports/protocols will be probed. For a complete list of all ports and protocols and their level, execute proxycheck with -h option.

-t timeout

a timeout, in secounds, for every operation. Default value is 30 secounds. The timer starts at the connection attempt to the proxy itself, after sending the "connect" command to the proxy and so on.

-m maxconn

Do not attempt to make more than maxconn parallel connections. By default, maximum number of parallel connections limited by the operating system and on most systems it is around 1000.

-M maxhconn

Do not make more than maxhconn parallel connections to the same host (default is unlimited). This may be useful for overloaded proxies which can't handle many parallel connections using different ports/protocols, but may significantly slow down the whole process.

-s

when an open proxy is found on a given IP, stop probing for other ports/protocols for this IP. Best used when many IPs are tested, and/or with -M option. This is because currently, proxycheck will not make any new connections to such host, but will wait for already active connections to complete.

-b bindaddr

use bindaddr as a source address for all outgoing connections.

-n

write a line about definitely closed proxies to stdout in additional to writing about open proxies, in a form

   127.0.0.1 http:8080 closed

-x

print extended proxy information (proxy-agent and the like) if available. This will be on the same "open" (or "closed" with -n) line, last, enclosed in square brackets [].

-i filename

read list of hosts to check from a given file filename (in addition to command line), or from stdin if filename if `-'.

Protocol and Port specification

      [proto:][port,port,port]



like:



      hc:3128,8080 (http protocol on ports 3128 and 8080)
      hc:    (default list of ports for http protocol)
      3128   (try http protocol on standard http port 3128)
      1234   (try all protocols on non-standard port 1234)

Simplest usage of proxycheck is to try to connect to e.g. your own mailserver with chat check method. First, connect to your mailserver on port 25 to see which line it outputs upon connection (SMTP greething line), and use it with chat:

  proxycheck -d yourmailserver.example.org:25 \
    -c chat::greething ip.add.re.ss...

proxycheck will write a single line for every proto:port it finds to be open on stdout, in the form:

  127.0.0.3 hc:80 open

In addition, if proxycheck is able to guess outgoing IP address of a proxy as seen by a destination system, and if that address is different from input proxycheck is connecting to, it will print this information too on the same line, like:

  127.0.0.2 hc:80 open 127.0.0.3

When -n option is specified, for proto:ports which aren't running open proxy service, and for which proxycheck is able to strongly determine this, a line in the following format will be written:

  127.0.0.4 hc:80 closed

When -x option is specified, there will be additional proxy info written on the same line (if available), like:

  127.0.0.2 hc:80 open 127.0.0.3 [AnalogX 3.1415926]
  127.0.0.3 hc:80 open [AnalogX 3.1415926]
  127.0.0.4 hc:80 closed [AnalogX 3.1415926]

One may see some detail of proxycheck's operations giving sufficient number of -v options in the command line. Verbosity level of 5 (-vvvvv) will show almost everything. All the debugging output will go to the standard error stream and thus will not affect normal operations (when you process proxycheck's output using some script).

proxycheck will exit with code 100 if at least one open proxy server was found. In case of incorrect usage, it will exit with code 1. If no open proxies where found, proxycheck will return 0.

This program is free software. It may be used and distributed in the terms of General Public License (GPL) version 2 or later.

proxycheck written by Michael Tokarev <mjt@corpit.ru>. Latest version of this utlilty may be found at http://www.corpit.ru/mjt/proxycheck.html.