wmmon - Window Maker dockapp for monitoring system information

wmmon [ OPTION ]

WMMon monitors the realtime CPU load as well as the average system load, and gives you some nice additional features too. It is intended for docking in Window Maker.

It currently provides:

•

a realtime CPU stress meter;

•

an auto-scaled average system load meter, like xload and wmavgload;

•

a realtime disk I/O stress meter;

•

auto-scaled disk I/O load meter;

•

realtime memory and swap usage meters;

•

a display for system uptime;

•

three user-defined commands to launch.

-display display

This option specifies the X server to contact; see X(7).

-geometry geometry

This option specifies the preferred position of clock; see X(7).

-l

Lock the mode, so that it cannot be cycled by clicking on the upper-left widget. You can use this to open multiple copies of WMMon, each set to a different mode.

-i

Start in disk I/O mode, which displays instantaneous disk usage and average disk load.

-s

Start in system information mode, which displays memory usage, swap usage, and uptime.

-h

Show help information.

-v

Print the version number.

The WMMon display can be cycled between CPU, disk I/O, and system information displays by clicking on the upper-left widget. This displays CPU information by default.

WMMon can also be used to launch programs. You may click either left, middle, or right mouse buttons in the average-load section of the window. The pre-configured program will be launched according to the mouse button clicked. (see CONFIGURATION FILE below.)

In order to move WMMon, drag on the outer edges. These are not sensitive to mouse clicks.

Window Maker

Window Maker users should drag and drop the WMMon window on the Dock. Then, right-click on the border of the window and select “Settings...”. Check “Start when Window Maker is started”.

AfterStep

AfterStep users should put the following in their $HOME/.steprc

Wharf wmmon - MaxSwallow "wmmon" wmmon &

Other window managers

WMMon runs nicely as a 64x64 shaped icon on your desktop.

WMMon can launch three user-defined commands, triggered by left, middle and right mouse button clicks. You can define the commands to launch in $HOME/.wmmonrc

left: xterm

middle: xload

right: xcalc

If WMMon detects a $HOME/.wmmonrc file, it will launch the appropriate command when you click on the clock.

The system administrator can define default commands in /etc/wmmonrc. The administrator may also choose to “fix” particular commands, making it impossible for users to change. These commands can be defined in /etc/wmmonrc.fixed, although this isn't a nice thing to do.

/etc/wmmonrc

$HOME/.wmmonrc

/etc/wmmonrc.fixed

WMMon was written by Martijn Pieterse and Antoine Nulle.

This manual page was written by Simon Law <sfllaw@debian.org> for the Debian system (but may be used by others). It is based on the documentation provided by the original program.

This manual is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.