When ZLE is reading a command from the terminal, it may read a sequence that is bound to some command and is also a prefix of a longer bound string. In this case ZLE will wait a certain time to see if more characters are typed, and if not (or they don't match any longer string) it will execute the binding. This timeout is defined by the KEYTIMEOUT parameter; its default is 0.4 sec. There is no timeout if the prefix string is not itself bound to a command.

The key timeout is also applied when ZLE is reading the bytes from a multibyte character string when it is in the appropriate mode. (This requires that the shell was compiled with multibyte mode enabled; typically also the locale has characters with the UTF-8 encoding, although any multibyte encoding known to the operating system is supported.) If the second or a subsequent byte is not read within the timeout period, the shell acts as if ? were typed and resets the input state.

As well as ZLE commands, key sequences can be bound to other strings, by using `bindkey -s'. When such a sequence is read, the replacement string is pushed back as input, and the command reading process starts again using these fake keystrokes. This input can itself invoke further replacement strings, but in order to detect loops the process will be stopped if there are twenty such replacements without a real command being read.

There is one user-defined widget which is special to the shell. If it does not exist, no special action is taken. The environment provided is identical to that for any other editing widget.

zle-line-init Executed every time the line editor is started to read a new line of input. The following example puts the line editor into vi command mode when it starts up.

zle-line-init() { zle -K vicmd; }
zle -N zle-line-init

(The command inside the function sets the keymap directly; it is equivalent to zle vi-cmd-mode.)

vi-backward-blank-word (unbound) (B) (unbound) Move backward one word, where a word is defined as a series of non-blank characters.

backward-char (^B ESC-[D) (unbound) (unbound)

Move backward one character.

vi-backward-char (unbound) (^H h ^?) (ESC-[D)

Move backward one character, without changing lines.

backward-word (ESC-B ESC-b) (unbound) (unbound)

Move to the beginning of the previous word.

emacs-backward-word

Move to the beginning of the previous word.

vi-backward-word (unbound) (b) (unbound)

Move to the beginning of the previous word, vi-style.

beginning-of-line (^A) (unbound) (unbound)

Move to the beginning of the line. If already at the beginning of the line, move to the beginning of the previous line, if any.

vi-beginning-of-line

Move to the beginning of the line, without changing lines.

end-of-line (^E) (unbound) (unbound)

Move to the end of the line. If already at the end of the line, move to the end of the next line, if any.

vi-end-of-line (unbound) ($) (unbound)

Move to the end of the line. If an argument is given to this command, the cursor will be moved to the end of the line (argument - 1) lines down.

vi-forward-blank-word (unbound) (W) (unbound)

Move forward one word, where a word is defined as a series of non-blank characters.

vi-forward-blank-word-end (unbound) (E) (unbound)

Move to the end of the current word, or, if at the end of the current word, to the end of the next word, where a word is defined as a series of non-blank characters.

forward-char (^F ESC-[C) (unbound) (unbound)

Move forward one character.

vi-forward-char (unbound) (space l) (ESC-[C)

Move forward one character.

vi-find-next-char (^X^F) (f) (unbound)

Read a character from the keyboard, and move to the next occurrence of it in the line.

vi-find-next-char-skip (unbound) (t) (unbound)

Read a character from the keyboard, and move to the position just before the next occurrence of it in the line.

vi-find-prev-char (unbound) (F) (unbound)

Read a character from the keyboard, and move to the previous occurrence of it in the line.

vi-find-prev-char-skip (unbound) (T) (unbound)

Read a character from the keyboard, and move to the position just after the previous occurrence of it in the line.

vi-first-non-blank (unbound) (^) (unbound)

Move to the first non-blank character in the line.

vi-forward-word (unbound) (w) (unbound)

Move forward one word, vi-style.

forward-word (ESC-F ESC-f) (unbound) (unbound)

Move to the beginning of the next word. The editor's idea of a word is specified with the WORDCHARS parameter.

emacs-forward-word

Move to the end of the next word.

vi-forward-word-end (unbound) (e) (unbound)

Move to the end of the next word.

vi-goto-column (ESC-|) (|) (unbound)

Move to the column specified by the numeric argument.

vi-goto-mark (unbound) (`) (unbound)

Move to the specified mark.

vi-goto-mark-line (unbound) (') (unbound)

Move to beginning of the line containing the specified mark.

vi-repeat-find (unbound) (;) (unbound)

Repeat the last vi-find command.

vi-rev-repeat-find (unbound) (,) (unbound)

Repeat the last vi-find command in the opposite direction.

beginning-of-buffer-or-history (ESC-<) (unbound) (unbound) Move to the beginning of the buffer, or if already there, move to the first event in the history list.

beginning-of-line-hist

Move to the beginning of the line. If already at the beginning of the buffer, move to the previous history line.

beginning-of-history

Move to the first event in the history list.

down-line-or-history (^N ESC-[B) (j) (ESC-[B)

Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list.

vi-down-line-or-history (unbound) (+) (unbound)

Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list. Then move to the first non-blank character on the line.

down-line-or-search

Move down a line in the buffer, or if already at the bottom line, search forward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

down-history (unbound) (^N) (unbound)

Move to the next event in the history list.

history-beginning-search-backward

Search backward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position.

end-of-buffer-or-history (ESC->) (unbound) (unbound)

Move to the end of the buffer, or if already there, move to the last event in the history list.

end-of-line-hist

Move to the end of the line. If already at the end of the buffer, move to the next history line.

end-of-history

Move to the last event in the history list.

vi-fetch-history (unbound) (G) (unbound)

Fetch the history line specified by the numeric argument. This defaults to the current history line (i.e. the one that isn't history yet).

history-incremental-search-backward (^R ^Xr) (unbound) (unbound)

Search backward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line.

A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will stop the search and go back to the original line. An undefined key will have the same effect. The supported functions are: backward-delete-char, vi-backward-delete-char, clear-screen, redisplay, quoted-insert, vi-quoted-insert, accept-and-hold, accept-and-infer-next-history, accept-line and accept-line-and-down-history.

magic-space just inserts a space. vi-cmd-mode toggles between the `main' and `vicmd' keymaps; the `main' keymap (insert mode) will be selected initially. history-incremental-search-backward will get the next occurrence of the contents of the mini-buffer. history-incremental-search-forward inverts the sense of the search. vi-repeat-search and vi-rev-repeat-search are similarly supported. The direction of the search is indicated in the mini-buffer.

Any multi-character string that is not bound to one of the above functions will beep and interrupt the search, leaving the last found line in the buffer. Any single character that is not bound to one of the above functions, or self-insert or self-insert-unmeta, will have the same effect but the function will be executed.

When called from a widget function by the zle command, the incremental search commands can take a string argument. This will be treated as a string of keys, as for arguments to the bindkey command, and used as initial input for the command. Any characters in the string which are unused by the incremental search will be silently ignored. For example,

zle history-incremental-search-backward forceps

will search backwards for forceps, leaving the minibuffer containing the string `forceps'.

history-incremental-search-forward (^S ^Xs) (unbound) (unbound)

Search forward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for history-incremental-search-backward.

history-search-backward (ESC-P ESC-p) (unbound) (unbound)

Search backward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

vi-history-search-backward (unbound) (/) (unbound)

Search backward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line.

A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will stop the search. The functions available in the mini-buffer are: accept-line, backward-delete-char, vi-backward-delete-char, backward-kill-word, vi-backward-kill-word, clear-screen, redisplay, quoted-insert and vi-quoted-insert.

vi-cmd-mode is treated the same as accept-line, and magic-space is treated as a space. Any other character that is not bound to self-insert or self-insert-unmeta will beep and be ignored. If the function is called from vi command mode, the bindings of the current insert mode will be used.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

history-search-forward (ESC-N ESC-n) (unbound) (unbound)

Search forward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

vi-history-search-forward (unbound) (?) (unbound)

Search forward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for vi-history-search-backward. Argument handling is also the same as for that command.

infer-next-history (^X^N) (unbound) (unbound)

Search in the history list for a line matching the current one and fetch the event following it.

insert-last-word (ESC-_ ESC-.) (unbound) (unbound)

Insert the last word from the previous history event at the cursor position. If a positive numeric argument is given, insert that word from the end of the previous history event. If the argument is zero or negative insert that word from the left (zero inserts the previous command word). Repeating this command replaces the word just inserted with the last word from the history event prior to the one just used; numeric arguments can be used in the same way to pick a word from that event.

When called from a shell function invoked from a user-defined widget, the command can take one to three arguments. The first argument specifies a history offset which applies to successive calls to this widget: if is -1, the default behaviour is used, while if it is 1, successive calls will move forwards through the history. The value 0 can be used to indicate that the history line examined by the previous execution of the command will be reexamined. Note that negative numbers should be preceded with a `--' argument to avoid confusing them with options.

If two arguments are given, the second specifies the word on the command line in normal array index notation (as a more natural alternative to the prefix argument). Hence 1 is the first word, and -1 (the default) is the last word.

If a third argument is given, its value is ignored, but it is used to signify that the history offset is relative to the current history line, rather than the one remembered after the previous invocations of insert-last-word.

For example, the default behaviour of the command corresponds to

zle insert-last-word -- -1 -1

while the command

zle insert-last-word -- -1 1 -

always copies the first word of the line in the history immediately before the line being edited. This has the side effect that later invocations of the widget will be relative to that line.

vi-repeat-search (unbound) (n) (unbound)

Repeat the last vi history search.

vi-rev-repeat-search (unbound) (N) (unbound)

Repeat the last vi history search, but in reverse.

up-line-or-history (^P ESC-[A) (k) (ESC-[A)

Move up a line in the buffer, or if already at the top line, move to the previous event in the history list.

vi-up-line-or-history (unbound) (-) (unbound)

Move up a line in the buffer, or if already at the top line, move to the previous event in the history list. Then move to the first non-blank character on the line.

up-line-or-search

Move up a line in the buffer, or if already at the top line, search backward in the history for a line beginning with the first word in the buffer.

If called from a function by the zle command with arguments, the first argument is taken as the string for which to search, rather than the first word in the buffer.

up-history (unbound) (^P) (unbound)

Move to the previous event in the history list.

history-beginning-search-forward

Search forward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position.

vi-add-eol (unbound) (A) (unbound) Move to the end of the line and enter insert mode.

vi-add-next (unbound) (a) (unbound)

Enter insert mode after the current cursor position, without changing lines.

backward-delete-char (^H ^?) (unbound) (unbound)

Delete the character behind the cursor.

vi-backward-delete-char (unbound) (X) (^H)

Delete the character behind the cursor, without changing lines. If in insert mode, this won't delete past the point where insert mode was last entered.

backward-delete-word

Delete the word behind the cursor.

backward-kill-line

Kill from the beginning of the line to the cursor position.

backward-kill-word (^W ESC-^H ESC-^?) (unbound) (unbound)

Kill the word behind the cursor.

vi-backward-kill-word (unbound) (unbound) (^W)

Kill the word behind the cursor, without going past the point where insert mode was last entered.

capitalize-word (ESC-C ESC-c) (unbound) (unbound)

Capitalize the current word and move past it.

vi-change (unbound) (c) (unbound)

Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the movement. Then enter insert mode. If the command is vi-change, change the current line.

vi-change-eol (unbound) (C) (unbound)

Kill to the end of the line and enter insert mode.

vi-change-whole-line (unbound) (S) (unbound)

Kill the current line and enter insert mode.

copy-region-as-kill (ESC-W ESC-w) (unbound) (unbound)

Copy the area from the cursor to the mark to the kill buffer.

copy-prev-word (ESC-^_) (unbound) (unbound)

Duplicate the word to the left of the cursor.

copy-prev-shell-word

Like copy-prev-word, but the word is found by using shell parsing, whereas copy-prev-word looks for blanks. This makes a difference when the word is quoted and contains spaces.

vi-delete (unbound) (d) (unbound)

Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the movement. If the command is vi-delete, kill the current line.

delete-char

Delete the character under the cursor.

vi-delete-char (unbound) (x) (unbound)

Delete the character under the cursor, without going past the end of the line.

delete-word

Delete the current word.

down-case-word (ESC-L ESC-l) (unbound) (unbound)

Convert the current word to all lowercase and move past it.

kill-word (ESC-D ESC-d) (unbound) (unbound)

Kill the current word.

gosmacs-transpose-chars

Exchange the two characters behind the cursor.

vi-indent (unbound) (>) (unbound)

Indent a number of lines.

vi-insert (unbound) (i) (unbound)

Enter insert mode.

vi-insert-bol (unbound) (I) (unbound)

Move to the first non-blank character on the line and enter insert mode.

vi-join (^X^J) (J) (unbound)

Join the current line with the next one.

kill-line (^K) (unbound) (unbound)

Kill from the cursor to the end of the line. If already on the end of the line, kill the newline character.

vi-kill-line (unbound) (unbound) (^U)

Kill from the cursor back to wherever insert mode was last entered.

vi-kill-eol (unbound) (D) (unbound)

Kill from the cursor to the end of the line.

kill-region

Kill from the cursor to the mark.

kill-buffer (^X^K) (unbound) (unbound)

Kill the entire buffer.

kill-whole-line (^U) (unbound) (unbound)

Kill the current line.

vi-match-bracket (^X^B) (%) (unbound)

Move to the bracket character (one of {}, () or []) that matches the one under the cursor. If the cursor is not on a bracket character, move forward without going past the end of the line to find one, and then go to the matching bracket.

vi-open-line-above (unbound) (O) (unbound)

Open a line above the cursor and enter insert mode.

vi-open-line-below (unbound) (o) (unbound)

Open a line below the cursor and enter insert mode.

vi-oper-swap-case

Read a movement command from the keyboard, and swap the case of all characters from the cursor position to the endpoint of the movement. If the movement command is vi-oper-swap-case, swap the case of all characters on the current line.

overwrite-mode (^X^O) (unbound) (unbound)

Toggle between overwrite mode and insert mode.

vi-put-before (unbound) (P) (unbound)

Insert the contents of the kill buffer before the cursor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it above the current line.

vi-put-after (unbound) (p) (unbound)

Insert the contents of the kill buffer after the cursor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it below the current line.

quoted-insert (^V) (unbound) (unbound)

Insert the next character typed into the buffer literally. An interrupt character will not be inserted.

vi-quoted-insert (unbound) (unbound) (^Q ^V)

Display a `^' at the cursor position, and insert the next character typed into the buffer literally. An interrupt character will not be inserted.

quote-line (ESC-') (unbound) (unbound)

Quote the current line; that is, put a `'' character at the beginning and the end, and convert all `'' characters to `'\'''.

quote-region (ESC-") (unbound) (unbound)

Quote the region from the cursor to the mark.

vi-replace (unbound) (R) (unbound)

Enter overwrite mode.

vi-repeat-change (unbound) (.) (unbound)

Repeat the last vi mode text modification. If a count was used with the modification, it is remembered. If a count is given to this command, it overrides the remembered count, and is remembered for future uses of this command. The cut buffer specification is similarly remembered.

vi-replace-chars (unbound) (r) (unbound)

Replace the character under the cursor with a character read from the keyboard.

self-insert (printable characters) (unbound) (printable characters and some control characters)

Insert a character into the buffer at the cursor position.

self-insert-unmeta (ESC-^I ESC-^J ESC-^M) (unbound) (unbound)

Insert a character into the buffer after stripping the meta bit and converting ^M to ^J.

vi-substitute (unbound) (s) (unbound)

Substitute the next character(s).

vi-swap-case (unbound) (~) (unbound)

Swap the case of the character under the cursor and move past it.

transpose-chars (^T) (unbound) (unbound)

Exchange the two characters to the left of the cursor if at end of line, else exchange the character under the cursor with the character to the left.

transpose-words (ESC-T ESC-t) (unbound) (unbound)

Exchange the current word with the one before it.

vi-unindent (unbound) (<) (unbound)

Unindent a number of lines.

up-case-word (ESC-U ESC-u) (unbound) (unbound)

Convert the current word to all caps and move past it.

yank (^Y) (unbound) (unbound)

Insert the contents of the kill buffer at the cursor position.

yank-pop (ESC-y) (unbound) (unbound)

Remove the text just yanked, rotate the kill-ring, and yank the new top. Only works following yank or yank-pop.

vi-yank (unbound) (y) (unbound)

Read a movement command from the keyboard, and copy the region from the cursor position to the endpoint of the movement into the kill buffer. If the command is vi-yank, copy the current line.

vi-yank-whole-line (unbound) (Y) (unbound)

Copy the current line into the kill buffer.

vi-yank-eol

Copy the region from the cursor position to the end of the line into the kill buffer. Arguably, this is what Y should do in vi, but it isn't what it actually does.

digit-argument (ESC-0..ESC-9) (1-9) (unbound) Start a new numeric argument, or add to the current one. See also vi-digit-or-beginning-of-line. This only works if bound to a key sequence ending in a decimal digit.

Inside a widget function, a call to this function treats the last key of the key sequence which called the widget as the digit.

neg-argument (ESC--) (unbound) (unbound)

Changes the sign of the following argument.

universal-argument

Multiply the argument of the next command by 4. Alternatively, if this command is followed by an integer (positive or negative), use that as the argument for the next command. Thus digits cannot be repeated using this command. For example, if this command occurs twice, followed immediately by forward-char, move forward sixteen spaces; if instead it is followed by -2, then forward-char, move backward two spaces.

Inside a widget function, if passed an argument, i.e. `zle universal-argument num', the numerical argument will be set to num; this is equivalent to `NUMERIC=num'.

argument-base

Use the existing numeric argument as a numeric base, which must be in the range 2 to 36 inclusive. Subsequent use of digit-argument and universal-argument will input a new prefix in the given base. The usual hexadecimal convention is used: the letter a or A corresponds to 10, and so on. Arguments in bases requiring digits from 10 upwards are more conveniently input with universal-argument, since ESC-a etc. are not usually bound to digit-argument.

The function can be used with a command argument inside a user-defined widget. The following code sets the base to 16 and lets the user input a hexadecimal argument until a key out of the digit range is typed:

zle argument-base 16
zle universal-argument

accept-and-menu-complete In a menu completion, insert the current completion into the buffer, and advance to the next possible completion.

complete-word

Attempt completion on the current word.

delete-char-or-list (^D) (unbound) (unbound)

Delete the character under the cursor. If the cursor is at the end of the line, list possible completions for the current word.

expand-cmd-path

Expand the current command to its full pathname.

expand-or-complete (TAB) (unbound) (TAB)

Attempt shell expansion on the current word. If that fails, attempt completion.

expand-or-complete-prefix

Attempt shell expansion on the current word up to cursor.

expand-history (ESC-space ESC-!) (unbound) (unbound)

Perform history expansion on the edit buffer.

expand-word (^X*) (unbound) (unbound)

Attempt shell expansion on the current word.

list-choices (ESC-^D) (^D =) (^D)

List possible completions for the current word.

list-expand (^Xg ^XG) (^G) (^G)

List the expansion of the current word.

magic-space

Perform history expansion and insert a space into the buffer. This is intended to be bound to space.

menu-complete

Like complete-word, except that menu completion is used. See the MENU_COMPLETE option.

menu-expand-or-complete

Like expand-or-complete, except that menu completion is used.

reverse-menu-complete

Perform menu completion, like menu-complete, except that if a menu completion is already in progress, move to the previous completion rather than the next.

end-of-list

When a previous completion displayed a list below the prompt, this widget can be used to move the prompt below the list.

accept-and-hold (ESC-A ESC-a) (unbound) (unbound) Push the contents of the buffer on the buffer stack and execute it.

accept-and-infer-next-history

Execute the contents of the buffer. Then search the history list for a line matching the current one and push the event following onto the buffer stack.

accept-line (^J ^M) (^J ^M) (^J ^M)

Finish editing the buffer. Normally this causes the buffer to be executed as a shell command.

accept-line-and-down-history (^O) (unbound) (unbound)

Execute the current line, and push the next history event on the the buffer stack.

beep

Beep, unless the BEEP option is unset.

vi-cmd-mode (^X^V) (unbound) (^[)

Enter command mode; that is, select the `vicmd' keymap. Yes, this is bound by default in emacs mode.

vi-caps-lock-panic

Hang until any lowercase key is pressed. This is for vi users without the mental capacity to keep track of their caps lock key (like the author).

clear-screen (^L ESC-^L) (^L) (^L)

Clear the screen and redraw the prompt.

describe-key-briefly

Reads a key sequence, then prints the function bound to that sequence.

exchange-point-and-mark (^X^X) (unbound) (unbound)

Exchange the cursor position with the position of the mark.

execute-named-cmd (ESC-x) (unbound) (unbound)

Read the name of an editor command and execute it. A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will abort the function. The allowed functions are: backward-delete-char, vi-backward-delete-char, clear-screen, redisplay, quoted-insert, vi-quoted-insert, backward-kill-word, vi-backward-kill-word, kill-whole-line, vi-kill-line, backward-kill-line, list-choices, delete-char-or-list, complete-word, accept-line, expand-or-complete and expand-or-complete-prefix.

kill-region kills the last word, and vi-cmd-mode is treated the same as accept-line. The space and tab characters, if not bound to one of these functions, will complete the name and then list the possibilities if the AUTO_LIST option is set. Any other character that is not bound to self-insert or self-insert-unmeta will beep and be ignored. The bindings of the current insert mode will be used.

Currently this command may not be redefined or called by name.

execute-last-named-cmd (ESC-z) (unbound) (unbound)

Redo the last function executed with execute-named-cmd.

Currently this command may not be redefined or called by name.

get-line (ESC-G ESC-g) (unbound) (unbound)

Pop the top line off the buffer stack and insert it at the cursor position.

pound-insert (unbound) (#) (unbound)

If there is no # character at the beginning of the buffer, add one to the beginning of each line. If there is one, remove a # from each line that has one. In either case, accept the current line. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness.

vi-pound-insert

If there is no # character at the beginning of the current line, add one. If there is one, remove it. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness.

push-input

Push the entire current multiline construct onto the buffer stack and return to the top-level (PS1) prompt. If the current parser construct is only a single line, this is exactly like push-line. Next time the editor starts up or is popped with get-line, the construct will be popped off the top of the buffer stack and loaded into the editing buffer.

push-line (^Q ESC-Q ESC-q) (unbound) (unbound)

Push the current buffer onto the buffer stack and clear the buffer. Next time the editor starts up, the buffer will be popped off the top of the buffer stack and loaded into the editing buffer.

push-line-or-edit

At the top-level (PS1) prompt, equivalent to push-line. At a secondary (PS2) prompt, move the entire current multiline construct into the editor buffer. The latter is equivalent to push-input followed by get-line.

recursive-edit

Only useful from a user-defined widget. At this point in the function, the editor regains control until one of the standard widgets which would normally cause zle to exit (typically an accept-line caused by hitting the return key) is executed. Instead, control returns to the user-defined widget. The status returned is non-zero if the return was caused by an error, but the function still continues executing and hence may tidy up. This makes it safe for the user-defined widget to alter the command line or key bindings temporarily.

The following widget, caps-lock, serves as an example.

self-insert-ucase() {
  LBUFFER+=${(U)KEYS[-1]}
}

integer stat

zle -N self-insert self-insert-ucase
zle -A caps-lock save-caps-lock
zle -A accept-line caps-lock

zle recursive-edit
stat=$?

zle -A .self-insert self-insert
zle -A save-caps-lock caps-lock
zle -D save-caps-lock

(( stat )) && zle send-break

return $stat

redisplay (unbound) (^R) (^R)

Redisplays the edit buffer.

reset-prompt (unbound) (unbound) (unbound)

Force the prompts on both the left and right of the screen to be re-expanded, then redisplay the edit buffer. This reflects changes both to the prompt variables themselves and changes in the expansion of the values (for example, changes in time or directory, or changes to the value of variables referred to by the prompt).

Otherwise, the prompt is only expanded each time zle starts, and when the display as been interrupted by output from another part of the shell (such as a job notification) which causes the command line to be reprinted.

send-break (^G ESC-^G) (unbound) (unbound)

Abort the current editor function, e.g. execute-named-command, or the editor itself, e.g. if you are in vared. Otherwise abort the parsing of the current line.

run-help (ESC-H ESC-h) (unbound) (unbound)

Push the buffer onto the buffer stack, and execute the command `run-help cmd', where cmd is the current command. run-help is normally aliased to man.

vi-set-buffer (unbound) (") (unbound)

Specify a buffer to be used in the following command. There are 35 buffers that can be specified: the 26 `named' buffers "a to "z and the nine `queued' buffers "1 to "9. The named buffers can also be specified as "A to "Z.

When a buffer is specified for a cut command, the text being cut replaces the previous contents of the specified buffer. If a named buffer is specified using a capital, the newly cut text is appended to the buffer instead of overwriting it.

If no buffer is specified for a cut command, "1 is used, and the contents of "1 to "8 are each shifted along one buffer; the contents of "9 is lost.

vi-set-mark (unbound) (m) (unbound)

Set the specified mark at the cursor position.

set-mark-command (^@) (unbound) (unbound)

Set the mark at the cursor position.

spell-word (ESC-$ ESC-S ESC-s) (unbound) (unbound)

Attempt spelling correction on the current word.

undefined-key

This command is executed when a key sequence that is not bound to any command is typed. By default it beeps.

undo (^_ ^Xu ^X^U) (unbound) (unbound)

Incrementally undo the last text modification.

redo

Incrementally redo undone text modifications.

vi-undo-change (unbound) (u) (unbound)

Undo the last text modification. If repeated, redo the modification.

what-cursor-position (^X=) (unbound) (unbound)

Print the character under the cursor, its code as an octal, decimal and hexadecimal number, the current cursor position within the buffer and the column of the cursor in the current line.

where-is

Read the name of an editor command and and print the listing of key sequences that invoke the specified command.

which-command (ESC-?) (unbound) (unbound)

Push the buffer onto the buffer stack, and execute the command `which-command cmd'. where cmd is the current command. which-command is normally aliased to whence.

vi-digit-or-beginning-of-line (unbound) (0) (unbound)

If the last command executed was a digit as part of an argument, continue the argument. Otherwise, execute vi-beginning-of-line.