tcp_open [-qz] host port [ sess ]

tcp_open [-qz] [ -s sess | -l sess,... ] ...

tcp_open [-qz] [-a fd | -f fd ] [ sess ] Open a new session. In the first and simplest form, open a TCP connection to host host at port port; numeric and symbolic forms are understood for both.

If sess is given, this becomes the name of the session which can be used to refer to multiple different TCP connections. If sess is not given, the function will invent a numeric name value (note this is not the same as the file descriptor to which the session is attached). It is recommended that session names not include `funny' characters, where funny characters are not well-defined but certainly do not include alphanumerics or underscores, and certainly do include whitespace.

In the second case, one or more sessions to be opened are given by name. A single session name is given after -s and a comma-separated list after -l; both options may be repeated as many times as necessary. The host and port are read from the file .ztcp_sessions in the same directory as the user's zsh initialisation files, i.e. usually the home directory, but $ZDOTDIR if that is set. The file consists of lines each giving a session name and the corresponding host and port, in that order (note the session name comes first, not last), separated by whitespace.

The third form allows passive and fake TCP connections. If the option -a is used, its argument is a file descriptor open for listening for connections. No function front-end is provided to open such a file descriptor, but a call to `ztcp -l port' will create one with the file descriptor stored in the parameter $REPLY. The listening port can be closed with `ztcp -c fd'. A call to `tcp_open -a fd' will block until a remote TCP connection is made to port on the local machine. At this point, a session is created in the usual way and is largely indistinguishable from an active connection created with one of the first two forms.

If the option -f is used, its argument is a file descriptor which is used directly as if it were a TCP session. How well the remainder of the TCP function system copes with this depends on what actually underlies this file descriptor. A regular file is likely to be unusable; a FIFO (pipe) of some sort will work better, but note that it is not a good idea for two different sessions to attempt to read from the same FIFO at once.

If the option -q is given with any of the three forms, tcp_open will not print informational messages, although it will in any case exit with an appropriate status.

If the line editor (zle) is in use, which is typically the case if the shell is interactive, tcp_open installs a handler inside zle which will check for new data at the same time as it checks for keyboard input. This is convenient as the shell consumes no CPU time while waiting; the test is performed by the operating system. Giving the option -z to any of the forms of tcp_open prevents the handler from being installed, so data must be read explicitly. Note, however, this is not necessary for executing complete sets of send and read commands from a function, as zle is not active at this point. Generally speaking, the handler is only active when the shell is waiting for input at a command prompt or in the vared builtin. The option has no effect if zle is not active; `[[ -o zle]]' will test for this.

The first session to be opened becomes the current session and subsequent calls to tcp_open do not change it. The current session is stored in the parameter $TCP_SESS; see below for more detail about the parameters used by the system.

tcp_close [-qn] [ -a | -l sess,... | sess ... ]

Close the named sessions, or the current session if none is given, or all open sessions if -a is given. The options -l and -s are both handled for consistency with tcp_open, although the latter is redundant.

If the session being closed is the current one, $TCP_SESS is unset, leaving no current session, even if there are other sessions still open.

If the session was opened with tcp_open -f, the file descriptor is closed so long as it is in the range 0 to 9 accessible directly from the command line. If the option -n is given, no attempt will be made to close file descriptors in this case. The -n option is not used for genuine ztcp session; the file descriptors are always closed with the session.

If the option -q is given, no informational messages will be printed.

tcp_read [-bdq] [ -t TO ] [ -T TO ]

[ -a | -u fd ... | -l sess,... | -s sess ...] Perform a read operation on the current session, or on a list of sessions if any are given with -u, -l or -s, or all open sessions if the option -a is given. Any of the -u, -l or -s options may be repeated or mixed together. The -u option specifies a file descriptor directly (only those managed by this system are useful), the other two specify sessions as described for tcp_open above.

The function checks for new data available on all the sessions listed. Unless the -b option is given, it will not block waiting for new data. Any one line of data from any of the available sessions will be read, stored in the parameter $TCP_LINE, and displayed to standard output unless $TCP_SILENT contains a non-empty string. When printed to standard output the string $TCP_PROMPT will be shown at the start of the line; the default form for this includes the name of the session being read. See below for more information on these parameters. In this mode, tcp_read can be called repeatedly until it returns status 2 which indicates all pending input from all specified sessions has been handled.

With the option -b, equivalent to an infinite timeout, the function will block until a line is available to read from one of the specified sessions. However, only a single line is returned.

The option -d indicates that all pending input should be drained. In this case tcp_read may process multiple lines in the manner given above; only the last is stored in $TCP_LINE, but the complete set is stored in the array $tcp_lines. This is cleared at the start of each call to tcp_read.

The options -t and -T specify a timeout in seconds, which may be a floating point number for increased accuracy. With -t the timeout is applied before each line read. With -T, the timeout applies to the overall operation, possibly including multiple read operations if the option -d is present; without this option, there is no distinction between -t and -T.

The function does not print informational messages, but if the option -q is given, no error message is printed for a non-existent session.

A return status of 2 indicates a timeout or no data to read. Any other non-zero return status indicates some error condition.

See tcp_log for how to control where data is sent by tcp_read.

tcp_send [-nq] [ -s sess | -l sess,... ] data ...

tcp_send [-nq] -a data ... Send the supplied data strings to all the specified sessions in turn. The underlying operation differs little from a `print -r' to the session's file descriptor, although it attempts to prevent the shell from dying owing to a SIGPIPE caused by an attempt to write to a defunct session.

The option -n prevents tcp_send from putting a newline at the end of the data strings.

The remaining options all behave as for tcp_read.

The data arguments are not further processed once they have been passed to tcp_send; they are simply passed down to print -r.

If the parameter $TCP_OUTPUT is a non-empty string and logging is enabled then the data sent to each session will be echoed to the log file(s) with $TCP_OUTPUT in front where appropriate, much in the manner of $TCP_PROMPT.

tcp_alias [-q] alias=sess ...

tcp_alias [-q] [ alias ] ...

tcp_alias -d [-q] alias ... This function is not particularly well tested.

The first form creates an alias for a session name; alias can then be used to refer to the existing session sess. As many aliases may be listed as required.

The second form lists any aliases specified, or all aliases if none.

The third form deletes all the aliases listed. The underlying sessions are not affected.

The option -q suppresses an inconsistently chosen subset of error messages.

tcp_log [-asc] [ -n | -N ] [ logfile ]

With an argument logfile, all future input from tcp_read will be logged to the named file. Unless -a (append) is given, this file will first be truncated or created empty. With no arguments, show the current status of logging.

With the option -s, per-session logging is enabled. Input from tcp_read is output to the file logfile.sess. As the session is automatically discriminated by the filename, the contents are raw (no $TCP_PROMPT). The option -a applies as above. Per-session logging and logging of all data in one file are not mutually exclusive.

The option -c closes all logging, both complete and per-session logs.

The options -n and -N respectively turn off or restore output of data read by tcp_read to standard output; hence `tcp_log -cn' turns off all output by tcp_read.

The function is purely a convenient front end to setting the parameters $TCP_LOG, $TCP_LOG_SESS, $TCP_SILENT, which are described below.

tcp_rename old new

Rename session old to session new. The old name becomes invalid.

tcp_sess [ sess [ command ... ] ]

With no arguments, list all the open sessions and associated file descriptors. The current session is marked with a star. For use in functions, direct access to the parameters $tcp_by_name, $tcp_by_fd and $TCP_SESS is probably more convenient; see below.

With a sess argument, set the current session to sess. This is equivalent to changing $TCP_SESS directly.

With additional arguments, temporarily set the current session while executing the string command .... The first argument is re-evaluated so as to expand aliases etc., but the remaining arguments are passed through as the appear to tcp_sess. The original session is restored when tcp_sess exits.

tcp_command send-options ... send-arguments ... This is a convenient front-end to tcp_send. All arguments are passed to tcp_send, then the function pauses waiting for data. While data is arriving at least every $TCP_TIMEOUT (default 0.3) seconds, data is handled and printed out according to the current settings. Status 0 is always returned.

This is generally only useful for interactive use, to prevent the display becoming fragmented by output returned from the connection. Within a programme or function it is generally better to handle reading data by a more explicit method.

tcp_expect [ -q ] [ -p var ] [ -t to | -T TO]

[ -a | -s sess ... | -l sess,... ] pattern ... Wait for input matching any of the given patterns from any of the specified sessions. Input is ignored until an input line matches one of the given patterns; at this point status zero is returned, the matching line is stored in $TCP_LINE, and the full set of lines read during the call to tcp_expect is stored in the array $tcp_expect_lines.

Sessions are specified in the same way as tcp_read: the default is to use the current session, otherwise the sessions specified by -a, -s, or -l are used.

Each pattern is a standard zsh extended-globbing pattern; note that it needs to be quoted to avoid it being expanded immediately by filename generation. It must match the full line, so to match a substring there must be a `*' at the start and end. The line matched against includes the $TCP_PROMPT added by tcp_read. It is possible to include the globbing flags `#b' or `#m' in the patterns to make backreferences available in the parameters $MATCH, $match, etc., as described in the base zsh documentation on pattern matching.

Unlike tcp_read, the default behaviour of tcp_expect is to block indefinitely until the required input is found. This can be modified by specifying a timeout with -t or -T; these function as in tcp_read, specifying a per-read or overall timeout, respectively, in seconds, as an integer or floating-point number. As tcp_read, the function returns status 2 if a timeout occurs.

The function returns as soon as any one of the patterns given match. If the caller needs to know which of the patterns matched, the option -p var can be used; on return, $var is set to the number of the pattern using ordinary zsh indexing, i.e. the first is 1, and so on. Note the absence of a `$' in front of var. To avoid clashes, the parameter cannot begin with `_expect'.

The option -q is passed directly down to tcp_read.

As all input is done via tcp_read, all the usual rules about output of lines read apply. One exception is that the parameter $tcp_lines will only reflect the line actually matched by tcp_expect; use $tcp_expect_lines for the full set of lines read during the function call.

tcp_proxy

This is a simple-minded function to accept a TCP connection and execute a command with I/O redirected to the connection. Extreme caution should be taken as there is no security whatsoever and this can leave your computer open to the world. Ideally, it should only be used behind a firewall.

The first argument is a TCP port on which the function will listen.

The remaining arguments give a command and its arguments to execute with standard input, standard output and standard error redirected to the file descriptor on which the TCP session has been accepted. If no command is given, a new zsh is started. This gives everyone on your network direct access to your account, which in many cases will be a bad thing.

The command is run in the background, so tcp_proxy can then accept new connections. It continues to accept new connections until interrupted.

tcp_spam [-ertv] [ -a | -s sess | -l sess,... ] cmd ...

Execute `cmd ...' for each session in turn. Note this executes the command and arguments; it does not send the command line as data unless the -t (transmit) option is given.

The sessions may be selected explicitly with the standard -a, -s or -l options, or may be chosen implicitly. If none of the three options is given the rules are: first, if the array $tcp_spam_list is set, this is taken as the list of sessions, otherwise all sessions are taken. Second, any sessions given in the array $tcp_no_spam_list are removed from the list of sessions.

Normally, any sessions added by the `-a' flag or when all sessions are chosen implicitly are spammed in alphabetic order; sessions given by the $tcp_spam_list array or on the command line are spammed in the order given. The -r flag reverses the order however it was arrived it.

The -v flag specifies that a $TCP_PROMPT will be output before each session. This is output after any modification to TCP_SESS by the user-defined tcp_on_spam function described below. (Obviously that function is able to generate its own output.)

If the option -e is present, the line given as cmd ... is executed using eval, otherwise it is executed without any further processing.

tcp_talk

This is a fairly simple-minded attempt to force input to the line editor to go straight to the default TCP_SESSION.

An escape string, $TCP_TALK_ESCAPE, default `:', is used to allow access to normal shell operation. If it is on its own at the start of the line, or followed only by whitespace, the line editor returns to normal operation. Otherwise, the string and any following whitespace are skipped and the remainder of the line executed as shell input without any change of the line editor's operating mode.

The current implementation is somewhat deficient in terms of use of the command history. For this reason, many users will prefer to use some form of alternative approach for sending data easily to the current session. One simple approach is to alias some special character (such as `%') to `tcp_command --'.

tcp_wait

The sole argument is an integer or floating point number which gives the seconds to delay. The shell will do nothing for that period except wait for input on all TCP sessions by calling tcp_read -a. This is similar to the interactive behaviour at the command prompt when zle handlers are installed.

tcp_point port

tcp_shoot host port This pair of functions provide a simple way to transfer a file between two hosts within the shell. Note, however, that bulk data transfer is currently done using cat. tcp_point reads any data arriving at port and sends it to standard output; tcp_shoot connects to port on host and sends its standard input. Any unused port may be used; the standard mechanism for picking a port is to think of a random four-digit number above 1024 until one works.

To transfer a file from host woodcock to host springes, on springes:

tcp_point 8091 >output_file

and on woodcock:

tcp_shoot springes 8091 <input_file

As these two functions do not require tcp_open to set up a TCP connection first, they may need to be autoloaded separately.