typedef CharT char_type

typedef Traits traits_type

typedef traits_type::int_type int_type

typedef traits_type::pos_type pos_type

typedef traits_type::off_type off_type

typedef std::size_t size_t

typedef basic_streambuf< char_type, traits_type > streambuf_type

typedef basic_filebuf< char_type, traits_type > __filebuf_type

typedef __basic_file< char > __file_type

typedef traits_type::state_type state_type

typedef codecvt< char_type, char, state_type > codecvt_type

stdio_filebuf ()

stdio_filebuf (int __fd, std::ios_base::openmode __mode, size_t size=static_cast< size_t >(BUFSIZ))

stdio_filebuf (std::c_file *__f, std::ios_base::openmode __mode, size_t size=static_cast< size_t >(BUFSIZ))

virtual ~stdio_filebuf ()

int fd ()

std::c_file * file ()

bool is_open () const throw ()

Returns true if the external file is open. __filebuf_type * open (const char *s, ios_base::openmode __mode)

Opens an external file. __filebuf_type * close () throw ()

Closes the currently associated file. streamsize in_avail ()

Looking ahead into the stream. int_type snextc ()

Getting the next character. int_type sbumpc ()

Getting the next character. int_type sgetc ()

Getting the next character. streamsize sgetn (char_type *s, streamsize n)

Entry point for xsgetn. int_type sputbackc (char_type c)

Pushing characters back into the input stream. int_type sungetc ()

Moving backwards in the input stream. int_type sputc (char_type c)

Entry point for all single-character output functions. streamsize sputn (const char_type *s, streamsize n)

Entry point for all single-character output functions.

void M_create_pback ()

void M_destroy_pback () throw ()

void M_allocate_internal_buffer ()

void M_destroy_internal_buffer () throw ()

virtual streamsize showmanyc ()

Investigating the data available. virtual int_type underflow ()

Fetches more data from the controlled sequence. virtual int_type pbackfail (int_type c=Traits::eof())

Tries to back up the input sequence. virtual int_type overflow (int_type c=Traits::eof())

Consumes data from the buffer; writes to the controlled sequence. bool M_convert_to_external (char_type *, streamsize)

virtual streambuf_type * setbuf (char_type *s, streamsize n)

Manipulates the buffer. virtual pos_type seekoff (off_type __off, ios_base::seekdir __way, ios_base::openmode __mode=ios_base::in|ios_base::out)

virtual pos_type seekoff (off_type, ios_base::seekdir, ios_base::openmode=ios_base::in|ios_base::out)

Alters the stream positions. virtual pos_type seekpos (pos_type position, ios_base::openmode __mode=ios_base::in|ios_base::out)

virtual pos_type seekpos (pos_type, ios_base::openmode=ios_base::in|ios_base::out)

Alters the stream positions. pos_type M_seek (off_type __off, ios_base::seekdir __way, state_type state)

virtual int sync ()

Synchronizes the buffer arrays with the controlled sequences. virtual void imbue (const locale &__loc)

Changes translations. virtual streamsize xsgetn (char_type *s, streamsize n)

Multiple character extraction. virtual streamsize xsputn (const char_type *s, streamsize n)

Multiple character insertion. bool M_terminate_output ()

void M_set_buffer (streamsize __off)

void gbump (int n)

Moving the read position. void setg (char_type *__gbeg, char_type *__gnext, char_type *__gend)

Setting the three read area pointers. void pbump (int n)

Moving the write position. void setp (char_type *__pbeg, char_type *__pend)

Setting the three write area pointers. virtual int_type uflow ()

Fetches more data from the controlled sequence.

char_type * eback () const

Access to the get area. char_type * gptr () const

Access to the get area. char_type * egptr () const

Access to the get area.

char_type * pbase () const

Access to the put area. char_type * pptr () const

Access to the put area. char_type * epptr () const

Access to the put area.

c_lock M_lock

__file_type M_file

ios_base::openmode M_mode

state_type M_state_beg

state_type M_state_cur

state_type M_state_last

char_type * M_buf

size_t M_buf_size

bool M_buf_allocated

bool M_reading

bool M_writing

const codecvt_type * M_codecvt

char * M_ext_buf

streamsize M_ext_buf_size

const char * M_ext_next

char * M_ext_end

char_type M_pback

char_type * M_pback_cur_save

char_type * M_pback_end_save

bool M_pback_init

class ios_base

class basic_ios< char_type, traits_type >

class basic_istream< char_type, traits_type >

class basic_ostream< char_type, traits_type >

class istreambuf_iterator< char_type, traits_type >

class ostreambuf_iterator< char_type, traits_type >

Provides a layer of compatibility for C/POSIX.

This GNU extension provides extensions for working with standard C FILE*'s and POSIX file descriptors. It must be instantiated by the user with the type of character used in the file stream, e.g., stdio_filebuf<char>.

Definition at line 53 of file stdio_filebuf.h.

These are standard types. They permit a standardized way of referring to names of (or names dependant on) the template parameters, which are specific to the implementation.

Reimplemented from std::basic_filebuf< CharT, Traits >.

Definition at line 57 of file stdio_filebuf.h.

These are standard types. They permit a standardized way of referring to names of (or names dependant on) the template parameters, which are specific to the implementation.

Reimplemented from std::basic_filebuf< CharT, Traits >.

Definition at line 59 of file stdio_filebuf.h.

These are standard types. They permit a standardized way of referring to names of (or names dependant on) the template parameters, which are specific to the implementation.

Reimplemented from std::basic_filebuf< CharT, Traits >.

Definition at line 61 of file stdio_filebuf.h.

These are standard types. They permit a standardized way of referring to names of (or names dependant on) the template parameters, which are specific to the implementation.

Reimplemented from std::basic_filebuf< CharT, Traits >.

Definition at line 60 of file stdio_filebuf.h.

These are standard types. They permit a standardized way of referring to names of (or names dependant on) the template parameters, which are specific to the implementation.

Reimplemented from std::basic_filebuf< CharT, Traits >.

Definition at line 58 of file stdio_filebuf.h.

deferred initialization

Definition at line 68 of file stdio_filebuf.h.

Parameters: fd An open file descriptor.

mode Same meaning as in a standard filebuf.

size Optimal or preferred size of internal buffer, in chars.

This constructor associates a file stream buffer with an open POSIX file descriptor. The file descriptor will be automatically closed when the stdio_filebuf is closed/destroyed.

Definition at line 130 of file stdio_filebuf.h.

Parameters: f An open FILE*.

mode Same meaning as in a standard filebuf.

size Optimal or preferred size of internal buffer, in chars. Defaults to system's BUFSIZ.

This constructor associates a file stream buffer with an open C FILE*. The FILE* will not be automatically closed when the stdio_filebuf is closed/destroyed.

Definition at line 146 of file stdio_filebuf.h.

Closes the external data stream if the file descriptor constructor was used.

Definition at line 125 of file stdio_filebuf.h.

Closes the currently associated file.

Returns: this on success, NULL on failure

If no file is currently open, this function immediately fails.

If a 'put buffer area' exists, overflow(eof) is called to flush all the characters. The file is then closed.

If any operations fail, this function also fails.

Definition at line 125 of file fstream.tcc.

Referenced by std::basic_filebuf< CharT, enc_char_traits< CharT > >::~basic_filebuf().

Access to the get area.

These functions are only available to other protected functions, including derived classes.

•

eback() returns the beginning pointer for the input sequence

•

gptr() returns the next pointer for the input sequence

•

egptr() returns the end pointer for the input sequence

Definition at line 452 of file streambuf.

Referenced by std::basic_filebuf< CharT, Traits >::imbue(), std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_destroy_pback(), std::basic_stringbuf< CharT, Traits, Alloc >::overflow(), std::basic_stringbuf< CharT, Traits, Alloc >::seekoff(), std::basic_filebuf< CharT, Traits >::seekoff(), std::basic_stringbuf< CharT, Traits, Alloc >::seekpos(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputbackc(), std::basic_filebuf< CharT, Traits >::underflow(), and std::basic_filebuf< CharT, Traits >::xsgetn().

Access to the get area.

These functions are only available to other protected functions, including derived classes.

•

eback() returns the beginning pointer for the input sequence

•

gptr() returns the next pointer for the input sequence

•

egptr() returns the end pointer for the input sequence

Definition at line 458 of file streambuf.

Referenced by std::copy_streambufs(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::in_avail(), std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_create_pback(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sbumpc(), std::basic_stringbuf< CharT, Traits, Alloc >::seekoff(), std::basic_filebuf< CharT, Traits >::seekoff(), std::basic_stringbuf< CharT, Traits, Alloc >::seekpos(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sgetc(), std::basic_stringbuf< CharT, Traits, Alloc >::str(), std::basic_stringbuf< CharT, Traits, Alloc >::underflow(), std::basic_filebuf< CharT, Traits >::underflow(), and std::basic_streambuf< CharT, Traits >::xsgetn().

Access to the put area.

These functions are only available to other protected functions, including derived classes.

•

pbase() returns the beginning pointer for the output sequence

•

pptr() returns the next pointer for the output sequence

•

epptr() returns the end pointer for the output sequence

Definition at line 505 of file streambuf.

Referenced by std::basic_stringbuf< CharT, Traits, Alloc >::overflow(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputc(), std::basic_streambuf< CharT, Traits >::xsputn(), and std::basic_filebuf< CharT, Traits >::xsputn().

Returns: The underlying file descriptor.

Once associated with an external data stream, this function can be used to access the underlying POSIX file descriptor. Note that there is no way for the library to track what you do with the descriptor, so be careful.

Definition at line 111 of file stdio_filebuf.h.

Returns: The underlying FILE*.

This function can be used to access the underlying 'C' file pointer. Note that there is no way for the library to track what you do with the file, so be careful.

Definition at line 121 of file stdio_filebuf.h.

Moving the read position.

Parameters: n The delta by which to move.

This just advances the read position without returning any data.

Definition at line 468 of file streambuf.

Referenced by std::copy_streambufs(), std::basic_stringbuf< CharT, Traits, Alloc >::pbackfail(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sbumpc(), std::basic_stringbuf< CharT, Traits, Alloc >::seekpos(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputbackc(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sungetc(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::uflow(), std::basic_streambuf< CharT, Traits >::xsgetn(), and std::basic_filebuf< CharT, Traits >::xsgetn().

Locale access.

Returns: The current locale in effect.

If pubimbue(loc) has been called, then the most recent loc is returned. Otherwise the global locale in effect at the time of construction is returned.

Definition at line 215 of file streambuf.

Access to the get area.

These functions are only available to other protected functions, including derived classes.

•

eback() returns the beginning pointer for the input sequence

•

gptr() returns the next pointer for the input sequence

•

egptr() returns the end pointer for the input sequence

Definition at line 455 of file streambuf.

Referenced by std::copy_streambufs(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::in_avail(), std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_create_pback(), std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_destroy_pback(), std::basic_stringbuf< CharT, Traits, Alloc >::pbackfail(), std::basic_filebuf< CharT, Traits >::pbackfail(), std::basic_stringbuf< CharT, Traits, Alloc >::seekoff(), std::basic_filebuf< CharT, Traits >::showmanyc(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputbackc(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sungetc(), and std::basic_streambuf< CharT, Traits >::xsgetn().

Changes translations.

Parameters: loc A new locale.

Translations done during I/O which depend on the current locale are changed by this call. The standard adds, 'Between invocations of this function a class derived from streambuf can safely cache results of calls to locale functions and to members of facets so obtained.'

Note: Base class version does nothing.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 822 of file fstream.tcc.

References std::ios_base::cur, std::basic_streambuf< CharT, Traits >::eback(), and std::basic_filebuf< CharT, Traits >::seekoff().

Looking ahead into the stream.

Returns: The number of characters available.

If a read position is available, returns the number of characters available for reading before the buffer must be refilled. Otherwise returns the derived showmanyc().

Definition at line 255 of file streambuf.

Returns true if the external file is open.

Definition at line 285 of file fstream.

Opens an external file.

Parameters: s The name of the file.

mode The open mode flags.

Returns: this on success, NULL on failure

If a file is already open, this function immediately fails. Otherwise it tries to open the file named s using the flags given in mode.

[Table 92 gives the relation between openmode combinations and the equivalent fopen() flags, but the table has not been copied yet.]

Definition at line 91 of file fstream.tcc.

References std::ios_base::ate, and std::ios_base::end.

Consumes data from the buffer; writes to the controlled sequence.

Parameters: c An additional character to consume.

Returns: eof() to indicate failure, something else (usually c, or not_eof())

Informally, this function is called when the output buffer is full (or does not exist, as buffering need not actually be done). If a buffer exists, it is 'consumed', with 'some effect' on the controlled sequence. (Typically, the buffer is written out to the sequence verbatim.) In either case, the character c is also written out, if c is not eof().

For a formal definiton of this function, see a good text such as Langer & Kreft, or [27.5.2.4.5]/3-7.

A functioning output streambuf can be created by overriding only this function (no buffer area will be used).

Note: Base class version does nothing, returns eof().

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 380 of file fstream.tcc.

References std::ios_base::out, std::basic_streambuf< CharT, Traits >::pbase(), std::basic_streambuf< CharT, Traits >::pbump(), and std::basic_streambuf< CharT, Traits >::pptr().

Tries to back up the input sequence.

Parameters: c The character to be inserted back into the sequence.

Returns: eof() on failure, 'some other value' on success

Postcondition: The constraints of gptr(), eback(), and pptr() are the same as for underflow().

Note: Base class version does nothing, returns eof().

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 328 of file fstream.tcc.

References std::ios_base::cur, std::basic_streambuf< CharT, Traits >::gptr(), and std::ios_base::in.

Access to the put area.

These functions are only available to other protected functions, including derived classes.

•

pbase() returns the beginning pointer for the output sequence

•

pptr() returns the next pointer for the output sequence

•

epptr() returns the end pointer for the output sequence

Definition at line 499 of file streambuf.

Referenced by std::basic_stringbuf< CharT, Traits, Alloc >::overflow(), std::basic_filebuf< CharT, Traits >::overflow(), std::basic_stringbuf< CharT, Traits, Alloc >::seekoff(), std::basic_stringbuf< CharT, Traits, Alloc >::seekpos(), and std::basic_filebuf< CharT, Traits >::xsputn().

Moving the write position.

Parameters: n The delta by which to move.

This just advances the write position without returning any data.

Definition at line 515 of file streambuf.

Referenced by std::basic_filebuf< CharT, Traits >::overflow(), std::basic_stringbuf< CharT, Traits, Alloc >::seekpos(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputc(), and std::basic_streambuf< CharT, Traits >::xsputn().

Access to the put area.

These functions are only available to other protected functions, including derived classes.

•

pbase() returns the beginning pointer for the output sequence

•

pptr() returns the next pointer for the output sequence

•

epptr() returns the end pointer for the output sequence

Definition at line 502 of file streambuf.

Referenced by std::basic_filebuf< CharT, Traits >::M_convert_to_external(), std::basic_filebuf< CharT, Traits >::M_terminate_output(), std::basic_stringbuf< CharT, Traits, Alloc >::overflow(), std::basic_filebuf< CharT, Traits >::overflow(), std::basic_stringbuf< CharT, Traits, Alloc >::seekoff(), std::basic_streambuf< CharT, enc_char_traits< CharT > >::sputc(), std::basic_stringbuf< CharT, Traits, Alloc >::str(), std::basic_filebuf< CharT, Traits >::sync(), std::basic_streambuf< CharT, Traits >::xsputn(), and std::basic_filebuf< CharT, Traits >::xsputn().

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 198 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 232 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 237 of file streambuf.

Entry points for derived buffer functions.

The public versions of pubfoo dispatch to the protected derived foo member functions, passing the arguments (if any) and returning the result unchanged.

Definition at line 228 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 242 of file streambuf.

Getting the next character.

Returns: The next character, or eof.

If the input read position is available, returns that character and increments the read pointer, otherwise calls and returns uflow().

Definition at line 287 of file streambuf.

Referenced by std::operator>>().

Alters the stream positions.

Each derived class provides its own appropriate behavior.

Note: Base class version does nothing, returns a pos_type that represents an invalid stream position.

Definition at line 572 of file streambuf.

Referenced by std::basic_streambuf< CharT, enc_char_traits< CharT > >::pubseekoff().

Alters the stream positions.

Each derived class provides its own appropriate behavior.

Note: Base class version does nothing, returns a pos_type that represents an invalid stream position.

Definition at line 584 of file streambuf.

Referenced by std::basic_streambuf< CharT, enc_char_traits< CharT > >::pubseekpos().

Manipulates the buffer.

Parameters: s Pointer to a buffer area.

n Size of s.

Returns: this

If no file has been opened, and both s and n are zero, then the stream becomes unbuffered. Otherwise, s is used as a buffer; see http://gcc.gnu.org/onlinedocs/libstdc++/27_io/howto.html#2 for more.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 629 of file fstream.tcc.

Setting the three read area pointers.

Parameters: gbeg A pointer.

gnext A pointer.

gend A pointer.

Postcondition: gbeg == eback(), gnext == gptr(), and gend == egptr()

Definition at line 479 of file streambuf.

Referenced by std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_create_pback(), std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_destroy_pback(), and std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_set_buffer().

Setting the three write area pointers.

Parameters: pbeg A pointer.

pend A pointer.

Postcondition: pbeg == pbase(), pbeg == pptr(), and pend == epptr()

Definition at line 525 of file streambuf.

Referenced by std::basic_filebuf< CharT, enc_char_traits< CharT > >::M_set_buffer().

Getting the next character.

Returns: The next character, or eof.

If the input read position is available, returns that character, otherwise calls and returns underflow(). Does not move the read position after fetching the character.

Definition at line 309 of file streambuf.

Referenced by std::copy_streambufs().

Entry point for xsgetn.

Parameters: s A buffer area.

n A count.

Returns xsgetn(s,n). The effect is to fill s[0] through s[n-1] with characters from the input sequence, if possible.

Definition at line 328 of file streambuf.

Investigating the data available.

Returns: An estimate of the number of characters available in the input sequence, or -1.

Note: Base class version does nothing, returns zero.

The standard adds that 'the intention is not only that the calls [to underflow or uflow] will not return eof() but that they will return 'immediately'.

The standard adds that 'the morphemes of showmanyc are 'es-how-many-see', not 'show-manic'.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 160 of file fstream.tcc.

References std::basic_streambuf< CharT, Traits >::gptr(), and std::ios_base::in.

Getting the next character.

Returns: The next character, or eof.

Calls sbumpc(), and if that function returns traits::eof(), so does this function. Otherwise, sgetc().

Definition at line 269 of file streambuf.

Referenced by std::copy_streambufs().

Pushing characters back into the input stream.

Parameters: c The character to push back.

Returns: The previous character, if possible.

Similar to sungetc(), but c is pushed onto the stream instead of 'the previous character'. If successful, the next character fetched from the input stream will be c.

Definition at line 342 of file streambuf.

Referenced by std::operator>>().

Entry point for all single-character output functions.

Parameters: c A character to output.

Returns: c, if possible.

One of two public output functions.

If a write position is available for the output sequence (i.e., the buffer is not full), stores c in that position, increments the position, and returns traits::to_int_type(c). If a write position is not available, returns overflow(c).

Definition at line 394 of file streambuf.

Referenced by std::copy_streambufs(), and std::basic_stringbuf< CharT, Traits, Alloc >::overflow().

Entry point for all single-character output functions.

Parameters: s A buffer read area.

n A count.

One of two public output functions.

Returns xsputn(s,n). The effect is to write s[0] through s[n-1] to the output sequence, if possible.

Definition at line 420 of file streambuf.

Referenced by std::copy_streambufs().

Moving backwards in the input stream.

Returns: The previous character, if possible.

If a putback position is available, this function decrements the input pointer and returns that character. Otherwise, calls and returns pbackfail(). The effect is to 'unget' the last character 'gotten'.

Definition at line 367 of file streambuf.

Synchronizes the buffer arrays with the controlled sequences.

Returns: -1 on failure.

Each derived class provides its own appropriate behavior, including the definition of 'failure'.

Note: Base class version does nothing, returns zero.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 805 of file fstream.tcc.

References std::basic_streambuf< CharT, Traits >::pptr().

Fetches more data from the controlled sequence.

Returns: The first character from the pending sequence.

Informally, this function does the same thing as underflow(), and in fact is required to call that function. It also returns the new character, like underflow() does. However, this function also moves the read position forward by one.

Reimplemented in __gnu_cxx::stdio_sync_filebuf< CharT, Traits >.

Definition at line 670 of file streambuf.

Referenced by std::basic_streambuf< CharT, enc_char_traits< CharT > >::sbumpc(), and std::basic_streambuf< CharT, Traits >::xsgetn().

Fetches more data from the controlled sequence.

Returns: The first character from the pending sequence.

Informally, this function is called when the input buffer is exhausted (or does not exist, as buffering need not actually be done). If a buffer exists, it is 'refilled'. In either case, the next available character is returned, or traits::eof() to indicate a null pending sequence.

For a formal definiton of the pending sequence, see a good text such as Langer & Kreft, or [27.5.2.4.3]/7-14.

A functioning input streambuf can be created by overriding only this function (no buffer area will be used). For an example, see http://gcc.gnu.org/onlinedocs/libstdc++/27_io/howto.html#6

Note: Base class version does nothing, returns eof().

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 178 of file fstream.tcc.

References std::__throw_ios_failure(), std::copy(), std::basic_streambuf< CharT, Traits >::eback(), std::basic_streambuf< CharT, Traits >::egptr(), std::ios_base::in, and std::min().

Multiple character extraction.

Parameters: s A buffer area.

n Maximum number of characters to assign.

Returns: The number of characters assigned.

Fills s[0] through s[n-1] with characters from the input sequence, as if by sbumpc(). Stops when either n characters have been copied, or when traits::eof() would be copied.

It is expected that derived classes provide a more efficient implementation by overriding this definition.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 499 of file fstream.tcc.

References std::basic_streambuf< CharT, Traits >::eback(), and std::basic_streambuf< CharT, Traits >::gbump().

Multiple character insertion.

Parameters: s A buffer area.

n Maximum number of characters to write.

Returns: The number of characters written.

Writes s[0] through s[n-1] to the output sequence, as if by sputc(). Stops when either n characters have been copied, or when sputc() would return traits::eof().

It is expected that derived classes provide a more efficient implementation by overriding this definition.

Reimplemented from std::basic_streambuf< CharT, Traits >.

Definition at line 582 of file fstream.tcc.

References std::basic_streambuf< CharT, Traits >::epptr(), std::min(), std::ios_base::out, std::basic_streambuf< CharT, Traits >::pbase(), and std::basic_streambuf< CharT, Traits >::pptr().

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 181 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 169 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 170 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 171 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 172 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 173 of file streambuf.

Entry point for imbue().

Parameters: loc The new locale.

Returns: The previous locale.

Calls the derived imbue(loc).

Definition at line 174 of file streambuf.