int ifp_init (struct ifp_device *dev, void *dev_handle)

Initializes device. int ifp_finalize (struct ifp_device *dev)

Releases device. Releases any resources aquired by ifp_init. Basically, when ifp_init returns 0 (success), ifp_finalize must be called after you're finished with dev. void * ifp_find_device (void)

Scans the system and returns the first compatible iFP device. int ifp_release_device (void *)

Releases device handle allocated by ifp_find_device. int ifp_selftest (struct ifp_device *dev)

Tests communications with the device. int ifp_format (struct ifp_device *dev)

Reformats the device's storage media. int ifp_update_firmware (struct ifp_device *dev, const char *localfile, ifp_progress fn, void *context)

Upgrades the firmware.

int ifp_device_info (struct ifp_device *dev, char *b, int n)

Creates a human readable status string. int ifp_battery (struct ifp_device *dev)

Reports the battery's status on the scale from 0 to 4. int ifp_capacity (struct ifp_device *dev)

Reports the device's capacity in bytes. int ifp_freespace (struct ifp_device *dev)

Reports the device's available free space in bytes. int ifp_model (struct ifp_device *dev, char *b, int n)

Reads in the device's model number into 's'. int ifp_delta (struct ifp_device *dev, int *values)

(experimental) retrieves a mystery value. int ifp_firmware_version (struct ifp_device *dev)

Reads the device's firmware version. The firmware version is returned in raw BCD. For human consumption, I suggest:. const char * ifp_error_message (int n)

Return an English string describing an error number.

int ifp_rename (struct ifp_device *dev, const char *old_path, const char *new_path)

Renames a file or directory. int ifp_delete (struct ifp_device *dev, const char *f)

Delete the file f. int ifp_mkdir (struct ifp_device *dev, const char *f)

Creates a new directory, f. int ifp_rmdir (struct ifp_device *dev, const char *f)

Deletes the directory f. int ifp_list_dirs (struct ifp_device *dev, const char *dirname, int(*callbk)(void *, int, const char *, int), void *context)

Reads directory contents. int ifp_treewalk_open (struct ifp_device *dev, const char *directory, void **handle)

Recursively walk a remote directory. (Interface similar to 'fts.h'.). int ifp_treewalk_close (void *tws_p)

Releases the resources used in a treewalk. ifp_treewalk_entry * ifp_treewalk_next (void *tws_p)

Returns the next file or directory in a treewalk.

int ifp_read_open (struct ifp_device *dev, const char *f)

Opens the file f for reading. int ifp_read_close (struct ifp_device *dev)

Closes a file open for reading. int ifp_read_seek (struct ifp_device *dev, int abs_position)

Fast-forward within the current file. int ifp_read_data (struct ifp_device *dev, void *b, int bytes)

Reads from an open file. Reads the next 'bytes' of data into 'buff'. int ifp_read_eof (struct ifp_device *dev)

Check if we've reached the end of the file. (EOF). int ifp_read_size (struct ifp_device *dev)

Returns the size of the current file in bytes.

int ifp_write_open (struct ifp_device *dev, const char *f, int fsize)

Opens the file f for writing. int ifp_write_close (struct ifp_device *dev)

Closes a file open for writing. int ifp_write_data (struct ifp_device *dev, void *b, int bytes)

Writes 'bytes' of data from buff to the file.

int ifp_read_file_progress (struct ifp_device *dev, FILE *dst, const char *f, int(*progress)(void *, int), void *context)

Downloads a file; includes a hook for a progress metre. int ifp_write_file_progress (struct ifp_device *dev, FILE *src, int filesize, const char *f, int(*progress)(void *, int), void *context)

Uploads a file; includes a hook for a progress metre. Creates a new file 'f' on the device and populates it with data from 'src'. Filesize is the number of bytes to be uploaded from 'src'. static int ifp_read_file (struct ifp_device *dev, FILE *dst, const char *f)

Reads the file 'f' into dst. static int ifp_write_file (struct ifp_device *dev, FILE *src, int filesize, const char *f)

Creates a new file 'f' from src. int ifp_download_file (struct ifp_device *dev, const char *remotefile, const char *localfile, ifp_progress fn, void *fn_context)

Downloads 'remotefile' and saves it directly on the filesystem as 'localfile'. int ifp_upload_file (struct ifp_device *dev, const char *localfile, const char *remotefile, ifp_progress fn, void *fn_context)

Uploads 'localfile' from the filesystem onto the device as 'remotefile'. int ifp_delete_dir_recursive (struct ifp_device *dev, const char *f)

Deletes the directory 'f', its files and subdirectories. (Think of 'rm -Rf'.). int ifp_download_dir (struct ifp_device *dev, const char *remotedir, const char *localdir, ifp_progress fn, void *fn_context)

Downloads the contents of 'remotedir' (including all subdirectories) and saves it as 'localdir'. int ifp_upload_dir (struct ifp_device *dev, const char *localdir, const char *remotedir, ifp_progress fn, void *fn_context)

Uploads the contents of 'localdir' (including all subdirectories) to the device as 'remotedir'.

int ifp_is_file (struct ifp_device *dev, const char *f)

Tests if f is a file. int ifp_is_dir (struct ifp_device *dev, const char *f)

Tests if f is a directory. int ifp_exists (struct ifp_device *dev, const char *f)

Tests for the existance of f.

int ifp_get_tuner_presets (struct ifp_device *dev, void *data, int n)

Retrieves the tuner preset file into 'data'. int ifp_set_tuner_presets (struct ifp_device *dev, void *data, int n)

Stores the tuner preset file 'data' on the device. int ifp_get_station (int n, void *b, char *callsign, int *freq)

Reads station #n from the binary datablock into more useful forms. int ifp_set_station (int n, void *data, const char *callsign, int freq)

Sets station #n to 'freq' and 'callsign'.

#define IFP_1XX 0x1001

#define IFP_3XX 0x1003

#define IFP_5XX 0x1005

#define IFP_7XX 0x1007

#define IFP_8XX 0x1008

#define IFP_9XX 0x1008

#define IFP_N10 0x1011

#define IFP_FILE 1

#define IFP_DIR 2

#define IFP_ERR_DEV_FUBAR 8

#define IFP_ERR_BAD_FREQUENCY 9

#define IFP_ERR_BAD_FILENAME 10

#define IFP_ERR_USER_CANCEL 11

#define IFP_TUNER_PRESET_DATA 240

#define IFP_FREQ_MIN 8750

#define IFP_FREQ_MAX 10800

#define IFP_PRESET_TOTAL 20

#define IFP_TUNER_LABEL 6

typedef int(* ifp_progress )(void *, struct ifp_transfer_status *)

Callback for implementing a progress metre.

enum { IFP_WALK_FILE = IFP_FILE, IFP_WALK_DIR_PRE = IFP_DIR, IFP_WALK_DIR_POST, IFP_WALK_NONE }

File types for treewalking.

Model number for iFP-100 series

Model number for iFP-300 series

Model number for iFP-500 series

Model number for iFP-700 series

Model number for iFP-800 series

Model number for iFP-900 series

Model number for N10

File 'type'.

Dir 'type'.

device not responding; try jiggling handle

tuner frequency out of range

filename is invalid. Likely causes are unsupported characters, or a filename that's too long (more than ::IFP_MAXFILENAMELEN chars).

note: linux's fatfs returns EINVAL instead. Should we switch?

A user callback requested the transfer be cancelled.

Tuner preset buffer size.

lowist valid frequency (87.5kHz)

highist valid frequency (108.0kHz)

number of preset stations.

max size of label string.

Callback for implementing a progress metre.

If provided, this function is typically called several times during a file transfer to give GUI applications a chance provide user feedback.

This function should return 0 for 'success' or 1 to request the transfer be cancelled when possible. (The request might be ignored.) Other values are considered 'error values'.

The first parameter is whatever if you passed to the main function as 'context'. You may use this for anything you like or leave it NULL.

The second parameter is a pointer to information about the transfer in progress. The only value guaranteed to be valid for _all_ transfers is file_bytes. Which values *are* valid should be obvious from context. To be on the safe side, please guard against NULL pointers and divide-by -zero errors. (The structure itself won't be NULL. I promise.)

File types for treewalking.

Enumeration values:

IFP_WALK_FILE

file

IFP_WALK_DIR_PRE

directory, before visiting its children

IFP_WALK_DIR_POST

directory, after visiting its children

IFP_WALK_NONE

none of the above

Initializes device.

Initialzies and tests the device for use with device_handle. (ifp_finalize should be called when you're finished with 'dev'.)

Parameters: dev Unitialized memory ready for use as an ifp_device.

device_handle The iFP USB hardware device handle.

Returns: IFP_ERR_DEV_FUBAR if the self-test failed. (Ask the user to jiggle the handle.)

0 on success.

Examples: simple.c.

Scans the system and returns the first compatible iFP device.

If no device is found, NULL is returned. The handle must be released with ifp_release_device.

Examples: simple.c.

Tests communications with the device.

This is done automatically on startup by ifp_init, so normal shouldn't need to call this.. unless they really want to.

Reformats the device's storage media.

(Deletes all your stuff.) Returns 0 on success, 1 on error. This function hasn't been tested--please report if you've successfully used it.

Upgrades the firmware.

This is much like a file upload, except: the filename on the local disk must be in the format 'IFP-?XXT.HEX', 'IFP-1XXTC.HEX' or 'N10.HEX'. The progress meter only tracks the firmware upload. The flash-upgrading itself and reboot take extra time we can't predict.

Immediately after calling ifp_update_firmware, the caller should release 'dev', and wait a healthy ammount of time (10 or more seconds) before trying to reconnect. During this time, you'll see the message 'upgrading firmware please don't touch' on the device, after which the device will shutdown: user will likely have to turn it back on themselves.

I welcome suggestions and/or code on how to help monitor the device status during a firmware upgrade.

Creates a human readable status string.

Creates a human readable status string similar to 'model IFP-007T, firmware 1.14, battery =[####], delta 1.8.4.42'.

Examples: simple.c.

Reports the battery's status on the scale from 0 to 4.

Typical values are 4, 0 and occasionally 2.

Reads in the device's model number into 's'.

('size' is the size of the buffer s points to.) Typical results look like 'IFP-590T'.

(experimental) retrieves a mystery value.

I've coined this mystery value 'Delta' until a better name is chosen.

Parameters: values an empty int[4] for the output values.

Integers returned in 'values' are my interpretation of the data. The actual raw data has been varried widely:

 0108 0312 ffff ffff
 0108 0415 ffff ffff
 0108 0616 ffff ffff
 0108 0417 0000 0000
 0108 0418 ffff ffff

Two devices returned 4 bytes instead of 8.

Reads the device's firmware version. The firmware version is returned in raw BCD. For human consumption, I suggest:.

      sprintf(s, '%x.%02x', r/0x0100, r%0x100)

Return an English string describing an error number.

(Available only in userland.)

Renames a file or directory.

Renames or moves the object 'old_path' to 'new_path'.

Parameters: old_path an existing file or directory.

new_path an available path for a new file or directory. (Ie, the path's parent directory exists and the path isn't in use by another object in that directory.)

Returns 0 on success and -ENOENT, -EEXIST, -EACCES, IFP_ERR_BAD_FILENAME on failure, as appropriate.

Delete the file f.

Returns -ENOENT if f doesn't exist.

Creates a new directory, f.

Returns -ENOENT if f's parent doesn't exist, -EEXISTS the dirname 'f' is allready in use, and IFP_ERR_BAD_FILENAME if 'f' contains unsupported characters.

Deletes the directory f.

Returns 0 on success or: -ENOENT -ENOTEMPTY -EACCES

Reads directory contents.

Passes the contents of 'dirname' to a callback function, one entry at a time. The parameters given to the callback function are:

•

void * context is the same context passed to list_dirs

•

int type is either IFP_FILE or IFP_DIR

•

char * name is the entry name without a full path. (Ie, no '\' chars)

•

int filesize is the number of bytes in a file (undefied for directories)

The callback can return '0' on success, '1' to 'break' (leave early without error) or <0 on error.

Returns 0 on success or -ENOENT if the directory doesn't exist.

Examples: simple.c.

Recursively walk a remote directory. (Interface similar to 'fts.h'.).

Start a treewalk for the 'directory' on the device. The handle for this session is placed at *handle; this handle is freed by calling ifp_treewalk_close.

'dev' won't be left in a 'special state' after calling treewalk-family functions. Likewise, please don't leave dev in a 'special state' before calling ifp_treewalk_open or ifp_treewalk_next.

Returns -ENOENT if the directory doesn't exist.

Releases the resources used in a treewalk.

Must be called after each successful call of ifp_treewalk_open.

Returns the next file or directory in a treewalk.

The structure returned is valid until the next ifp_treewalk_next or ifp_treewalk_close function call. See ifp_treewalk_entry for details about the fields.

Likewise, please don't leave 'dev' in a 'special state' before calling ifp_treewalk_next.

NULL is returned after the last entry.

Opens the file f for reading.

Returns -ENOENT if 'f' doesn't exist and -EACCES if 'f' is read-protected by the device.

Fast-forward within the current file.

In the current open file, skip forward to 'bytes' (ignoring the data). Caution: the implementation isn't particularily fast, and can only seek forward. Avoid it if you can.

Reads from an open file. Reads the next 'bytes' of data into 'buff'.

Returns: the number of bytes read, or <0 on error.

Opens the file f for writing.

Creates and opens a new file of 'filesize' bytes with the name 'f'. Returns -EEXIST if the name 'f' isn't available. (Ie, if there allready exists a file or directory with the same name.) Returns -ENOENT, -ENOSPC, or IFP_ERR_BAD_FILENAME

Writes 'bytes' of data from buff to the file.

Returns 0 on success. (Does not return the number of bytes written--it's all or nothing.)

Downloads a file; includes a hook for a progress metre.

Reads the file 'f' from the device and saves it in 'dst'.

Parameters: f name of the remote file we're downloading

dst where the data will be saved

progress Optional. If given, this function will be called occationally so an application can update a progress metre. (For example.)

context Context for the progress metre. (Safe to leave NULL.)

(Available only in userland.)

Returns -ENOENT if 'f' doesn't exist; -EACCES if 'f' is read-protected by the device; -ENOSPC; and IFP_ERR_USER_CANCEL if the callback requested the transfer cancelled.

(Available only in userland.)

Uploads a file; includes a hook for a progress metre. Creates a new file 'f' on the device and populates it with data from 'src'. Filesize is the number of bytes to be uploaded from 'src'.

(Note: it appears the device might not need to know the number of bytes in a file ahead time. The current implementation doesn't support this, but if you don't have access to the filesize ahead of time, you might be able to hack libifp to let you do it anyways.)

Parameters: src data to be uploaded

filesize number of bytes to copy from src

f name of the file to be created

progress Optional. If given, this function will be called occationally so an application can update its progress metre.

context Context for the progress metre. (Safe to leave NULL.)

Returns -EEXIST, -ENOENT, -ENOSPC, IFP_ERR_BAD_FILENAME, IFP_ERR_USER_CANCEL

(Available only in userland.)

Downloads 'remotefile' and saves it directly on the filesystem as 'localfile'.

The progress callback function 'fn' and its context pointer are optional. See ifp_progress and ifp_transfer_status for more information.

Returns -ENOENT, -EACCES, -ENOSPC and IFP_ERR_USER_CANCEL (Available only in userland.)

Note: There is currently a 'EPIPE' bug in the wild that is relatively rare but causes file corruption during download. ifp_download_file and ifp_download_dir detect and recover from it automatically, but you might see the progress numbers 'jump backwards' occasionally.

Uploads 'localfile' from the filesystem onto the device as 'remotefile'.

The progress callback function 'fn' and its context pointer are optional. See ifp_progress and ifp_transfer_status for more information.

Returns -EEXIST, -ENOENT, -ENOSPC, IFP_ERR_BAD_FILENAME, IFP_ERR_USER_CANCEL (Available only in userland.)

Deletes the directory 'f', its files and subdirectories. (Think of 'rm -Rf'.).

Will return -ENOENT if 'f' doesn't exist or isn't a directory.

(Available only in userland, at this time.)

Downloads the contents of 'remotedir' (including all subdirectories) and saves it as 'localdir'.

Note that 'localdir' must not allready exist. Example: suppose localdir was '/tmp/tunes/tame' and remotedir was '\classical\junk'. The directory '/tmp/tunes/tame' will be created and the file '\classical\junk\buz\fud.ogg' will be copied as '/tmp/tunes/tame/buz/fud.ogg'

The progress callback function 'fn' and its context pointer are optional. See ifp_progress and ifp_transfer_status for more information.

Returns -ENOENT, -EACCES, -ENOSPC IFP_ERR_USER_CANCEL

(Available only in userland.)

Note: There is currently a 'EPIPE' bug in the wild that is relatively rare but causes file corruption during download. ifp_download_file and ifp_download_dir detect and recover from it automatically, but you might see the progress numbers 'jump backwards' occasionally.

Uploads the contents of 'localdir' (including all subdirectories) to the device as 'remotedir'.

Note that 'remotedir' must not exist on the remote device. Example: suppose localdir was '/tmp/tunes/tame' and remotedir was '\classical\junk'. The directory '\classical\junk' will be created and the file '/tmp/tunes/tame/buz/fud.ogg' will be copied as '\classical\junk\buz\fud.ogg'.

The progress callback function 'fn' and its context pointer are optional. See ifp_progress and ifp_transfer_status for more information.

Returns -EEXIST, -ENOENT, -ENOSPC, IFP_ERR_BAD_FILENAME, or IFP_ERR_USER_CANCEL. FIXME: handle invalid filenames from local filesystem with more grace

(Available only in userland.)

Tests if f is a file.

Returns 1 if it is, and 0 if it doesn't exist or isn't a file.

Tests if f is a directory.

Returns 1 if it is, and 0 if it doesn't exist or isn't a dir.

Tests for the existance of f.

Returns: IFP_FILE if f is a file

IFP_DIR if f is a directory

0 if f doesn't exist

<0 error.

Retrieves the tuner preset file into 'data'.

'data' is a buffer of 'n' bytes.. n must be at least IFP_TUNER_PRESET_DATA bytes.

Stores the tuner preset file 'data' on the device.

'data' is tuner preset file to be stored.. it is extactly IFP_TUNER_PRESET_DATA bytes. 'n' must be exactly IFP_TUNER_PRESET_DATA

Reads station #n from the binary datablock into more useful forms.

b is the block of data loaded using ifp_get_tuner_presets, n is a number between 0 and IFP_PRESET_TOTAL-1, callsign is a pointer to a buffer of at least IFP_TUNER_LABEL+1 bytes, freq is a pointer to an integer, where the station's frequency will be saved. The frequency units are 10*kHz (0.01MHz) and should range from IFP_FREQ_MIN to IFP_FREQ_MAX.

Apon successful return, 'callsign' will be loaded the station's label as a zero-terminated string, and 'freq' will be the station's frequency in units of 10*kHz (0.01MHz).

Sets station #n to 'freq' and 'callsign'.

b is the block of data loaded using ifp_get_tuner_presets, n is a number between 0 and IFP_PRESET_TOTAL-1, callsign is a zero-terminated string (but only the first 6 characters will be used), freq is the FM frequency in units of Hz*10^4 (or 0.01 MHz); freq should range from IFP_FREQ_MIN to IFP_FREQ_MAX.

eg: //sets station #4 to 94.9MHz and labeled 'bbc1' i = ifp_set_station(3, p, 'bbc1', 9490);

Notes: -ifp_set_tuner_presets must be called before any changes to take affect.

-Although this interface suggests frequency accuracy of 0.01MHz is possible, I've found some players only support increments 0.05MHz. Setting a frequency to a more accurate value is *not* an error: the hardware will silently truncate to a nearby acceptable value.

-User interfaces can provide feedback to the user of the above 'effect' by saving and reloading the preset data after every change. Any trunction by the hardware will be immediately obvious.

Returns IFP_ERR_BAD_FREQUENCY if the frequency is out of range.