HTML::TextToHTML - convert plain text file to HTML.

This describes version 2.43 of HTML::TextToHTML.

  From the command line:

    txt2html I<arguments>

  From Scripts:

    use HTML::TextToHTML;

    # create a new object
    my $conv = new HTML::TextToHTML();

    # convert a file
    $conv->txt2html(infile=>[$text_file],
                     outfile=>$html_file,
                     title=>"Wonderful Things",
                     mail=>1,
      ]);

    # reset arguments
    $conv->args(infile=>[], mail=>0);

    # convert a string
    $newstring = $conv->process_chunk($mystring)

HTML::TextToHTML converts plain text files to HTML. The txt2html script uses this module to do the same from the command-line.

It supports headings, tables, lists, simple character markup, and hyperlinking, and is highly customizable. It recognizes some of the apparent structure of the source document (mostly whitespace and typographic layout), and attempts to mark that structure explicitly using HTML. The purpose for this tool is to provide an easier way of converting existing text documents to HTML format, giving something nicer than just whapping the text into a big PRE block.

The original txt2html script was written by Seth Golub (see http://www.aigeek.com/txt2html/), and converted to a perl module by Kathryn Andersen (see http://www.katspace.com/tools/text_to_html/) and made into a sourceforge project by Sun Tong (see http://sourceforge.net/projects/txt2html/). Earlier versions of the HTML::TextToHTML module called the included script texthyper so as not to clash with the original txt2html script, but now the projects have all been merged.

HTML::TextToHTML requires Perl 5.6.1 or later.

For installation, it needs:

    Module::Build

The txt2html script needs:

    Getopt::Long
    Getopt::ArgvFile
    Pod::Usage
    File::Basename

For testing, it also needs:

    Test::More

For debugging, it also needs:

    Data::Dumper

Make sure you have the dependencies installed first! (see REQUIRES above)

Some of those modules come standard with more recent versions of perl, but I thought I'd mention them anyway, just in case you may not have them.

If you don't know how to install these, try using the CPAN module, an easy way of auto-installing modules from the Comprehensive Perl Archive Network, where the above modules reside. Do perldoc perlmodinstall or perldoc CPAN for more information.

To install this module type the following:

   perl Build.PL
   ./Build
   ./Build test
   ./Build install

Or, if you're on a platform (like DOS or Windows) that doesn't like the ./ notation, you can do this:

   perl Build.PL
   perl Build
   perl Build test
   perl Build install

In order to install somewhere other than the default, such as in a directory under your home directory, like /home/fred/perl go

   perl Build.PL --install_base /home/fred/perl

as the first step instead.

This will install the files underneath /home/fred/perl.

You will then need to make sure that you alter the PERL5LIB variable to find the modules, and the PATH variable to find the script.

Therefore you will need to change: your path, to include /home/fred/perl/script (where the script will be)

        PATH=/home/fred/perl/script:${PATH}

the PERL5LIB variable to add /home/fred/perl/lib

        PERL5LIB=/home/fred/perl/lib:${PERL5LIB}

Note that the system links dictionary will be installed as /home/fred/perl/share/txt2html/txt2html.dict

If you want to install in a temporary install directory (such as if you are building a package) then instead of going

   perl Build install

go

   perl Build install destdir=/my/temp/dir

and it will be installed there, with a directory structure under /my/temp/dir the same as it would be if it were installed plain. Note that this is NOT the same as setting --install_base, because certain things are done at build-time which use the install_base info.

See perldoc perlrun for more information on PERL5LIB, and see perldoc Module::Build for more information on installation options.

All arguments can be set when the object is created, and further options can be set when calling the actual txt2html method. Arguments to methods can take either a hash of arguments, or a reference to an array. Note that the reference-to-array method is depricated and is only retained for backwards compatibility.

Note that all option-names must match exactly no abbreviations are allowed.

The arguments get treated differently depending on whether they are given in a hash or a reference to an array. When the arguments are in a hash, the argument-keys are expected to have values matching those required for that argument whether that be a boolean, a string, a reference to an array or a reference to a hash. These will replace any value for that argument that might have been there before.

When the arguments are in a reference to an array, it is treated somewhat as if it were a command-line: option names are expected to start with '--' or '-', boolean options are set to true as soon as the option is given (no value is expected to follow), boolean options with the word no prepended set the option to false, string options are expected to have a string value following, and those options which are internally arrays or hashes are treated as cumulative; that is, the value following the --option is added to the current set for that option, to add more, one just repeats the --option with the next value, and in order to reset that option to empty, the special value of CLEAR must be added to the list.

NOTE: the reference-to-an-array usage is DEPRECATED and will be removed in the future.

append_file

    append_file=>I<filename>

If you want something appended by default, put the filename here. The appended text will not be processed at all, so make sure it's plain text or decent HTML. i.e. do not have things like: Mary Andersen <kitty@example.com> but instead, have: Mary Andersen &lt;kitty@example.com&gt; (default: nothing)

append_head

    append_head=>I<filename>

If you want something appended to the head by default, put the filename here. The appended text will not be processed at all, so make sure it's plain text or decent HTML. i.e. do not have things like: Mary Andersen <kitty@example.com> but instead, have: Mary Andersen &lt;kitty@example.com&gt; (default: nothing)

body_deco

    body_deco=>I<string>

Body decoration string: a string to be added to the BODY tag so that one can set attributes to the BODY (such as class, style, bgcolor etc) For example, class='withimage'.

bold_delimiter

    bold_delimiter=>I<string>

This defines what character (or string) is taken to be the delimiter of text which is to be interpreted as bold (that is, to be given a STRONG tag). If this is empty, then no bolding of text will be done. (default: #)

bullets

    bullets=>I<string>

This defines what single characters are taken to be bullet characters for unordered lists. Note that because this is used as a character class, if you use '-' it must come first. (default:-=o*\267)

bullets_ordered

    bullets_ordered=>I<string>

This defines what single characters are taken to be bullet placeholder characters for ordered lists. Ordered lists are normally marked by a number or letter followed by '.' or ')' or ']' or ':'. If an ordered bullet is used, then it simply indicates that this is an ordered list, without giving explicit numbers. Note that because this is used as a character class, if you use '-' it must come first. (default:nothing)

caps_tag

    caps_tag=>I<tag>

Tag to put around all-caps lines (default: STRONG) If an empty tag is given, then no tag will be put around all-caps lines.

custom_heading_regexp

    custom_heading_regexp=>I<regexp>

Add a regexp for headings. Header levels are assigned by regexp in order seen When a line matches a custom header regexp, it is tagged as a header. If it's the first time that particular regexp has matched, the next available header level is associated with it and applied to the line. Any later matches of that regexp will use the same header level. Therefore, if you want to match numbered header lines, you could use something like this:

    -H '^ *\d+\. \w+' -H '^ *\d+\.\d+\. \w+' -H '^ *\d+\.\d+\.\d+\. \w+'

Then lines like

                " 1. Examples "
                " 1.1. Things"
            and " 4.2.5. Cold Fusion"

Would be marked as H1, H2, and H3 (assuming they were found in that order, and that no other header styles were encountered). If you prefer that the first one specified always be H1, the second always be H2, the third H3, etc, then use the -EH/--explicit-headings option. This is a multi-valued option. (default: none)

debug

    debug=>1

Enable copious script debugging output (don't bother, this is for the developer) (default: false)

default_link_dict

    default_link_dict=>I<filename>

The name of the default user link dictionary. (default: $ENV{'HOME'}/.txt2html.dict this is the same as for the txt2html script. If there is no CW$ENV{HOME} then it is just '.txt2html.dict')

demoronize

    demoronize=>1

Convert Microsoft-generated character codes that are non-ISO codes into something more reasonable. (default:true)

dict_debug

    dict_debug=>I<n>

Debug mode for link dictionaries Bitwise-Or what you want to see: 1: The parsing of the dictionary 2: The code that will make the links 4: When each rule matches something 8: When each tag is created (default: 0)

doctype

    doctype=>I<doctype>

This gets put in the DOCTYPE field at the top of the document, unless it's empty. (default : -//W3C//DTD HTML 3.2 Final//EN) If --xhtml is true, the contents of this is ignored, unless it's empty, in which case no DOCTYPE declaration is output.

eight_bit_clean

    eight_bit_clean=>1

disable Latin-1 character entity naming (default: false)

escape_HTML_chars

    escape_HTML_chars=>1

turn & < > into &amp; &gt; &lt; (default: true)

explicit_headings

    explicit_headings=>1

Don't try to find any headings except the ones specified in the --custom_heading_regexp option. Also, the custom headings will not be assigned levels in the order they are encountered in the document, but in the order they are specified on the command line. (default: false)

extract

    extract=>1

Extract Mode; don't put HTML headers or footers on the result, just the plain HTML (thus making the result suitable for inserting into another document (or as part of the output of a CGI script). (default: false)

hrule_min

    hrule_min=>I<n>

Min number of ---s for an HRule. (default: 4)

indent_width

    indent_width=>I<n>

Indents this many spaces for each level of a list. (default: 2)

indent_par_break

    indent_par_break=>1

Treat paragraphs marked solely by indents as breaks with indents. That is, instead of taking a three-space indent as a new paragraph, put in a <BR> and three non-breaking spaces instead. (see also --preserve_indent) (default: false)

infile

    infile=>\@my_files
    infile=>['chapter1.txt', 'chapter2.txt']
    "--infile", "chapter1.txt", "--infile", "chapter2.txt"

The name of the input file(s). When the arguments are given as a hash, this expects a reference to an array of filenames. When the arguments are given as a reference to an array, then the --infile option must be repeated for each new file added to the list. If you want to reset the list to be empty, give the special value of CLEAR. The special filename '-' designates STDIN. See also inhandle and instring. (default:-)

inhandle

    inhandle=>\@my_handles
    inhandle=>[\*MYINHANDLE, \*STDIN]

An array of input filehandles; use this instead of infile or instring to use a filehandle or filehandles as input.

instring

    instring=>\@my_strings
    instring=>[$string1, $string2]

An array of input strings; use this instead of infile or inhandle to use a string or strings as input.

italic_delimiter

    italic_delimiter=>I<string>

This defines what character (or string) is taken to be the delimiter of text which is to be interpreted as italic (that is, to be given a EM tag). If this is empty, no italicising of text will be done. (default: *)

links_dictionaries

    links_dictionaries=>\@my_link_dicts
    links_dictionaries=>['url_links.dict', 'format_links.dict']
    "--links_dictionaries", "url_links.dict", "--links_dictionaries", "format_links.dict"

File(s) to use as a link-dictionary. There can be more than one of these. These are in addition to the Global Link Dictionary and the User Link Dictionary. When the arguments are given as a hash, this expects a reference to an array of filenames. When the arguments are given as a reference to an array, then the --links_dictionaries option must be repeated for each new file added to the list. If you want to reset the list to be empty, give the special value of CLEAR.

link_only

    link_only=>1

Do no escaping or marking up at all, except for processing the links dictionary file and applying it. This is useful if you want to use the linking feature on an HTML document. If the HTML is a complete document (includes HTML,HEAD,BODY tags, etc) then you'll probably want to use the --extract option also. (default: false)

lower_case_tags

     lower_case_tags=>1

Force all tags to be in lower-case.

mailmode

    mailmode=>1

Deal with mail headers & quoted text. The mail header paragraph is given the class 'mail_header', and mail-quoted text is given the class 'quote_mail'. (default: false)

make_anchors

    make_anchors=>0

Should we try to make anchors in headings? (default: true)

make_links

    make_links=>0

Should we try to build links? If this is false, then the links dictionaries are not consulted and only structural text-to-HTML conversion is done. (default: true)

make_tables

    make_tables=>1

Should we try to build tables? If true, spots tables and marks them up appropriately. See Input File Format for information on how tables should be formatted. This overrides the detection of lists; if something looks like a table, it is taken as a table, and list-checking is not done for that paragraph. (default: false)

min_caps_length

    min_caps_length=>I<n>

min sequential CAPS for an all-caps line (default: 3)

outfile

    outfile=>I<filename>

The name of the output file. If it is - then the output goes to Standard Output. (default: - )

outhandle

The output filehandle; if this is given then the output goes to this filehandle instead of to the file given in outfile.

par_indent

    par_indent=>I<n>

Minumum number of spaces indented in first lines of paragraphs. Only used when there's no blank line preceding the new paragraph. (default: 2)

preformat_trigger_lines

    preformat_trigger_lines=>I<n>

How many lines of preformatted-looking text are needed to switch to <PRE> <= 0 : Preformat entire document 1 : one line triggers >= 2 : two lines trigger (default: 2)

endpreformat_trigger_lines

    endpreformat_trigger_lines=>I<n>

How many lines of unpreformatted-looking text are needed to switch from <PRE> <= 0 : Never preformat within document 1 : one line triggers >= 2 : two lines trigger (default: 2) NOTE for preformat_trigger_lines and endpreformat_trigger_lines: A zero takes precedence. If one is zero, the other is ignored. If both are zero, entire document is preformatted.

preformat_start_marker

    preformat_start_marker=>I<regexp>

What flags the start of a preformatted section if --use_preformat_marker is true. (default: ^(:?(:?&lt;)|<)PRE(:?(:?&gt;)|>)\$)

preformat_end_marker

    preformat_end_marker=>I<regexp>

What flags the end of a preformatted section if --use_preformat_marker is true. (default: ^(:?(:?&lt;)|<)/PRE(:?(:?&gt;)|>)\$)

preformat_whitespace_min

    preformat_whitespace_min=>I<n>

Minimum number of consecutive whitespace characters to trigger normal preformatting. NOTE: Tabs are expanded to spaces before this check is made. That means if tab_width is 8 and this is 5, then one tab may be expanded to 8 spaces, which is enough to trigger preformatting. (default: 5)

prepend_file

    prepend_file=>I<filename>

If you want something prepended to the processed body text, put the filename here. The prepended text will not be processed at all, so make sure it's plain text or decent HTML. (default: nothing)

preserve_indent

    preserve_indent=>1

Preserve the first-line indentation of paragraphs marked with indents by replacing the spaces of the first line with non-breaking spaces. (default: false)

short_line_length

    short_line_length=>I<n>

Lines this short (or shorter) must be intentionally broken and are kept that short. (default: 40)

style_url

    style_url=>I<url>

This gives the URL of a stylesheet; a LINK tag will be added to the output.

tab_width

    tab_width=>I<n>

How many spaces equal a tab? (default: 8)

table_type

    table_type=>{ ALIGN=>0, PGSQL=>0, BORDER=>1, DELIM=>0 }

This determines which types of tables will be recognised when make_tables is true. The possible types are ALIGN, PGSQL, BORDER and DELIM. (default: all types are true)

title

    title=>I<title>

You can specify a title. Otherwise it will use a blank one. (default: nothing)

titlefirst

    titlefirst=>1

Use the first non-blank line as the title.

underline_length_tolerance

    underline_length_tolerance=>I<n>

How much longer or shorter can underlines be and still be underlines? (default: 1)

underline_offset_tolerance

    underline_offset_tolerance=>I<n>

How far offset can underlines be and still be underlines? (default: 1)

unhyphenation

    unhyphenation=>0

Enables unhyphenation of text. (default: true)

use_mosaic_header

    use_mosaic_header=>1

Use this option if you want to force the heading styles to match what Mosaic outputs. (Underlined with ***s is H1, with ===s is H2, with +++ is H3, with --- is H4, with ~~~ is H5 and with ... is H6) This was the behavior of txt2html up to version 1.10. (default: false)

use_preformat_marker

    use_preformat_marker=>1

Turn on preformatting when encountering <PRE> on a line by itself, and turn it off when there's a line containing only </PRE>. When such preformatted text is detected, the PRE tag will be given the class 'quote_explicit'. (default: off)

xhtml

    xhtml=>1

Try to make the output conform to the XHTML standard, including closing all open tags and marking empty tags correctly. This turns on --lower_case_tags and overrides the --doctype option. Note that if you add a header or a footer file, it is up to you to make it conform; the header/footer isn't touched by this. Likewise, if you make link-dictionary entries that break XHTML, then this won't fix them, except to the degree of putting all tags into lower-case.

    $conv = new HTML::TextToHTML()

    $conv = new HTML::TextToHTML(titlefirst=>1,
        ...
    );

Create a new object with new. If one argument is given, it is assumed to be a reference to an array of arguments. If more than one argument is given, it is assumed to be a hash of arguments. These arguments will be used in invocations of other methods.

See OPTIONS for the possible values of the arguments.

    $conv->args(short_line_length=>60,
        titlefirst=>1,
        ....
    );

Updates the current arguments/options of the HTML::TextToHTML object. Takes either a hash, or a reference to an array of arguments, which will be used in invocations of other methods. See OPTIONS for the possible values of the arguments.

NOTE: the reference-to-an-array usage is DEPRECATED and will be removed in the future.

$newstring = CW$conv->process_chunk($mystring);

Convert a string to a HTML fragment. This assumes that this string is at the least, a single paragraph, but it can contain more than that. This returns the processed string. If you want to pass arguments to alter the behaviour of this conversion, you need to do that earlier, either when you create the object, or with the args method.

    $newstring = $conv->process_chunk($mystring,
                            close_tags=>0);

If there are open tags (such as lists) in the input string, process_chunk will now automatically close them, unless you specify not to, with the close_tags option.

    $newstring = $conv->process_chunk($mystring,
                            is_fragment=>1);

If you want this string to be treated as a fragment, and not assumed to be a paragraph, set is_fragment to true. If there is more than one paragraph in the string (ie it contains blank lines) then this option will be ignored.

$newstring = CW$conv->process_para($mystring);

Convert a string to a HTML fragment. This assumes that this string is at the most a single paragraph, with no blank lines in it. If you don't know whether your string will contain blank lines or not, use the process_chunk method instead.

This returns the processed string. If you want to pass arguments to alter the behaviour of this conversion, you need to do that earlier, either when you create the object, or with the args method.

    $newstring = $conv->process_para($mystring,
                            close_tags=>0);

If there are open tags (such as lists) in the input string, process_para will now automatically close them, unless you specify not to, with the close_tags option.

    $newstring = $conv->process_para($mystring,
                            is_fragment=>1);

If you want this string to be treated as a fragment, and not assumed to be a paragraph, set is_fragment to true.

    $conv->txt2html(%args);

Convert a text file to HTML. Takes a hash of arguments, or a reference to an array of arguments to customize the conversion; (this includes saying what file to convert!) See OPTIONS for the possible values of the arguments. Arguments which have already been set with new or args will remain as they are, unless they are overridden.

There are two files which are used which can affect the outcome of the conversion. One is the link dictionary, which contains patterns (of how to recognise http links and other things) and how to convert them. The other is, naturally, the format of the input file itself.

A link dictionary file contains patterns to match, and what to convert them to. It is called a link dictionary because it was intended to be something which defined what a href link was, but it can be used for more than that. However, if you wish to define your own links, it is strongly advised to read up on regular expressions (regexes) because this relies heavily on them.

The file consists of comments (which are lines starting with #) and blank lines, and link entries. Each entry consists of a regular expression, a -> separator (with optional flags), and a link result.

In the simplest case, with no flags, the regular expression defines the pattern to look for, and the result says what part of the regular expression is the actual link, and the link which is generated has the href as the link, and the whole matched pattern as the visible part of the link. The first character of the regular expression is taken to be the separator for the regex, so one could either use the traditional / separator, or something else such as | (which can be helpful with URLs which are full of / characters).

So, for example, an ftp URL might be defined as:

    |ftp:[\w/\.:+\-]+|      -> $&

This takes the whole pattern as the href, and the resultant link has the same thing in the href as in the contents of the anchor.

But sometimes the href isn't the whole pattern.

    /<URL:\s*(\S+?)\s*>/ --> $1

With the above regex, a () grouping marks the first subexpression, which is represented as CW$1 (rather than $& the whole expression). This entry matches a URL which was marked explicity as a URL with the pattern <URL:foo> (note the &lt; is shown as the entity, not the actual character. This is because by the time the links dictionary is checked, all such things have already been converted to their HTML entity forms, unless, of course, the escape_HTML_chars option was turned off) This would give us a link in the form <A HREF=foo>&lt;URL:foo&gt;</A>

The h flag

However, if we want more control over the way the link is constructed, we can construct it ourself. If one gives the h flag, then the result part of the entry is taken not to contain the href part of the link, but the whole link.

For example, the entry:

    /&lt;URL:\s*(\S+?)\s*&gt;/ -h-> <A HREF="$1">$1</A>

will take <URL:foo> and give us <A HREF=foo>foo</A>

However, this is a very powerful mechanism, because it can be used to construct custom tags which aren't links at all. For example, to flag *italicised words* the following entry will surround the words with EM tags.

    /\B\*([a-z][a-z -]*[a-z])\*\B/ -hi-> <EM>$1</EM>

The i flag

This turns on ignore case in the pattern matching.

The e flag

This turns on execute in the pattern substitution. This really only makes sense if h is turned on too. In that case, the result part of the entry is taken as perl code to be executed, and the result of that code is what replaces the pattern.

The o flag

This marks the entry as a once-only link. This will convert the first instance of a matching pattern, and ignore any others further on.

For example, the following pattern will take the first mention of HTML::TextToHTML and convert it to a link to the module's home page.

    "HTML::TextToHTML"  -io-> http://www.katspace.com/tools/text_to_html/

For the most part, this module tries to use intuitive conventions for determining the structure of the text input. Unordered lists are marked by bullets; ordered lists are marked by numbers or letters; in either case, an increase in indentation marks a sub-list contained in the outer list.

Headers (apart from custom headers) are distinguished by underlines underneath them; headers in all-capitals are distinguished from those in mixed case. All headers, both normal and custom headers, are expected to start at the first line in a paragraph.

In other words, the following is a header:

    I am Head Man
    -------------

But the following does not have a header:

    I am not a head Man, man
    I am Head Man
    -------------

Tables require a more rigid convention. A table must be marked as a separate paragraph, that is, it must be surrounded by blank lines. Tables come in different types. For a table to be parsed, its --table_type option must be on, and the --make_tables option must be true.

ALIGN Table Type

Columns must be separated by two or more spaces (this prevents accidental incorrect recognition of a paragraph where interword spaces happen to line up). If there are two or more rows in a paragraph and all rows share the same set of (two or more) columns, the paragraph is assumed to be a table. For example

    -e  File exists.
    -z  File has zero size.
    -s  File has nonzero size (returns size).

becomes

    <TABLE>
    <TR><TD>-e</TD><TD>File exists.</TD></TR>
    <TR><TD>-z</TD><TD>File has zero size.</TD></TR>
    <TR><TD>-s</TD><TD>File has nonzero size (returns size).</TD></TR>
    </TABLE>

This guesses for each column whether it is intended to be left, centre or right aligned.

BORDER Table Type

This table type has nice borders around it, and will be rendered with a border, like so:

    +---------+---------+
    | Column1 | Column2 |
    +---------+---------+
    | val1    | val2    |
    | val3    | val3    |
    +---------+---------+

The above becomes

    <TABLE border="1">
    <THEAD><TR><TH>Column1</TH><TH>Column2</TH></TR></THEAD>
    <TBODY>
    <TR><TD>val1</TD><TD>val2</TD></TR>
    <TR><TD>val3</TD><TD>val3</TD></TR>
    </TBODY>
    </TABLE>

It can also have an optional caption at the start.

         My Caption
    +---------+---------+
    | Column1 | Column2 |
    +---------+---------+
    | val1    | val2    |
    | val3    | val3    |
    +---------+---------+

PGSQL Table Type

This format of table is what one gets from the output of a Postgresql query.

     Column1 | Column2
    ---------+---------
     val1    | val2
     val3    | val3
    (2 rows)

This can also have an optional caption at the start. This table is also rendered with a border and table-headers like the BORDER type.

DELIM Table Type

This table type is delimited by non-alphanumeric characters, and has to have at least two rows and two columns before it's recognised as a table.

This one is delimited by the '| character:

    | val1  | val2  |
    | val3  | val3  |

But one can use almost any suitable character such as : # $ % + and so on. This is clever enough to figure out what you are using as the delimiter if you have your data set up like a table. Note that the line has to both begin and end with the delimiter, as well as using it to separate values.

This can also have an optional caption at the start.

    use HTML::TextToHTML;

    my $conv = new HTML::TextToHTML();

    my $conv = new HTML::TextToHTML(title=>"Wonderful Things",
                            default_link_dict=>$my_link_file,
      );

    $conv->args(short_line_length=>60,
               preformat_trigger_lines=>4,
               caps_tag=>"strong",
      );

    $conv->txt2html(infile=>[$text_file],
                     outfile=>$html_file,
                     title=>"Wonderful Things",
                     mail=>1
      );

    open(IN, "ls |") or die "could not open!";
    $conv->txt2html(inhandle=>[\*IN],
                     outfile=>'-',
      );

•

One cannot use CLEAR as a value for the cumulative arguments.

•

If the underline used to mark a header is off by more than 1, then that part of the text will not be picked up as a header unless you change the value of --underline_length_tolerance and/or --underline_offset_tolerance. People tend to forget this.

Tell me about them.

perl txt2html. Data::Dumper

    Kathryn Andersen (RUBYKAT)
    perlkat AT katspace dot com
    http//www.katspace.com/

based on txt2html by Seth Golub

Original txt2html script copyright (c) 1994-2000 Seth Golub <seth AT aigeek.com>

Copyright (c) 2002-2005 by Kathryn Andersen

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.