Lingua::Ispell.pm - a module encapsulating access to the Ispell program.

Note: this module was previously known as Text::Ispell; if you have Text::Ispell installed on your system, it is now obsolete and should be replaced by Lingua::Ispell.

ispell, when reporting on misspelled words, indicates the string it was unable to verify, as well as its starting offset in the input line. No such information is returned for words which are deemed to be correctly spelled. For example, in a line like Can't buy a thrill, ispell simply reports that the line contained four correctly spelled words.

Lingua::Ispell would like to identify which substrings of the input line are words correctly spelled or otherwise. It used to attempt to split the input line into words according to the same rules ispell uses; but that has proven to be very difficult, resulting in both slow and error-prone code.

Lingua::Ispell now operates only in terse mode. In this mode, only misspelled words are reported. Words which ispell verifies as correctly spelled are silently accepted.

In the report structures returned by CWspellcheck(), the CW'term' member is now always identical to the CW'original' member; of the two, you should probably use the CW'term' member. (Also consider the CW'offset' member.) ispell does not report this information for correctly spelled words; if at some point in the future this capability is added to ispell, Lingua::Ispell will be updated to take advantage of it.

Use of the CW$word_chars variable has been removed; setting it no longer has any effect.

CWterse_mode() now does nothing.

 # Brief:
 use Lingua::Ispell;
 Lingua::Ispell::spellcheck( $string );
 # or
 use Lingua::Ispell qw( spellcheck ); # import the function
 spellcheck( $string );

 # Useful:
 use Lingua::Ispell qw( :all );  # import all symbols
 for my $r ( spellcheck( "hello hacking perl shrdlu 42" ) ) {
   print "$r->{'type'}: $r->{'term'}\n";
 }

Lingua::Ispell::spellcheck() takes one argument. It must be a string, and it should contain only printable characters. One allowable exception is a terminal newline, which will be chomped off anyway. The line is fed to a coprocess running ispell for analysis. ispell parses the line into terms according to the language-specific rules in effect.

The result of ispell's analysis of each term is a categorization of the term into one of six types: ok, compound, root, miss, none, and guess. Some of these carry additional information. The first three types are correctly spelled terms, and the last three are for incorrectly spelled terms.

Lingua::Ispell::spellcheck returns a list of objects, each corresponding to a term in the spellchecked string. Each object is a hash (hash-ref) with at least two entries: 'term' and 'type'. The former contains the term ispell is reporting on, and the latter is ispell's determination of that term's type (see above). For types 'ok' and 'none', that is all the information there is. For the type 'root', an additional hash entry is present: 'root'. Its value is the word which ispell identified in the dictionary as being the likely root of the current term. For the type 'miss', an additional hash entry is present: 'misses'. Its value is an ref to an array of words which ispell identified as being near-misses of the current term, when scanning the dictionary.

As mentioned above, CWLingua::Ispell::spellcheck() currently only reports on misspelled terms.

 use Lingua::Ispell qw( spellcheck );
 Lingua::Ispell::allow_compounds(1);
 for my $r ( spellcheck( "hello hacking perl salmoning fruithammer shrdlu 42" ) ) {
   if ( $r->{'type'} eq 'ok' ) {
     # as in the case of 'hello'
     print "'$r->{'term'}' was found in the dictionary.\n";
   }
   elsif ( $r->{'type'} eq 'root' ) {
     # as in the case of 'hacking'
     print "'$r->{'term'}' can be formed from root '$r->{'root'}'\n";
   }
   elsif ( $r->{'type'} eq 'miss' ) {
     # as in the case of 'perl'
     print "'$r->{'term'}' was not found in the dictionary;\n";
     print "Near misses: @{$r->{'misses'}}\n";
   }
   elsif ( $r->{'type'} eq 'guess' ) {
     # as in the case of 'salmoning'
     print "'$r->{'term'}' was not found in the dictionary;\n";
     print "Root/affix Guesses: @{$r->{'guesses'}}\n";
   }
   elsif ( $r->{'type'} eq 'compound' ) {
     # as in the case of 'fruithammer'
     print "'$r->{'term'}' is a valid compound word.\n";
   }
   elsif ( $r->{'type'} eq 'none' ) {
     # as in the case of 'shrdlu'
     print "No match for term '$r->{'term'}'\n";
   }
   # and numbers are skipped entirely, as in the case of 42.
 }

CWLingua::Ispell::spellcheck() starts the ispell coprocess if the coprocess seems not to exist. Ordinarily this is simply the first time it's called.

ispell is spawned via the CWOpen2::open2() function, which throws an exception (i.e. dies) if the spawn fails. The caller should be prepared to catch this exception unless, of course, the default behavior of die is acceptable.

The full location of the ispell executable is stored in the variable CW$Lingua::Ispell::path. The default value is /usr/bin/ispell. If your ispell executable has some name other than this, then you must set CW$Lingua::Ispell::path accordingly before you call CWLingua::Ispell::spellcheck() (or any other function in the module) for the first time!

Adds a word to the personal dictionary. Be careful of capitalization. If you want the word to be added case-insensitively, you should call CWadd_word_lc()

Adds a word to the personal dictionary, in lower-case form. This allows ispell to match it in a case-insensitive manner.

Similar to adding a word to the dictionary, in that it causes ispell to accept the word as valid, but it does not actually add it to the dictionary. Presumably the effects of this only last for the current ispell session, which will mysteriously end if any of the coprocess-restarting functions are called...

Causes ispell to parse subsequent input lines according to the specified formatter. As of ispell v. 3.1.20, only 'tex' and 'nroff' are supported.

Causes ispell to set its internal operational parameters according to the given language. Legal arguments to this function, and its effects, are currently unknown by the author of Lingua::Ispell.

Causes ispell to save the current state of the dictionary to its disk file. Presumably ispell would ordinarily only do this upon exit.

BINOTE: This function has been disabled! Lingua::Ispell now always operates in terse mode.

In terse mode, ispell will not produce reports for correct words. This means that the calling program will not receive results of the types 'ok', 'root', and 'compound'.

The following functions cause the current ispell coprocess, if any, to terminate. This means that all the changes to the state of ispell made by the above functions will be lost, and their respective values reset to their defaults. The only function above whose effect is persistent is CWsave_dictionary().

Perhaps in the future we will figure out a good way to make this state information carry over from one instantiation of the coprocess to the next.

When this value is set to True, compound words are accepted as legal as long as both words are found in the dictionary; more than two words are always illegal. When this value is set to False, run-together words are considered spelling errors.

The default value of this setting is dictionary-dependent, so the caller should set it explicitly if it really matters.

This setting controls when ispell makes wild guesses.

If False, ispell only makes sane guesses, i.e. possible root/affix combinations that match the current dictionary; only if it can find none will it make wild guesses, which don't match the dictionary, and might in fact be illegal words.

If True, wild guesses are always made, along with any sane guesses. This feature can be useful if the dictionary has a limited word list, or a word list with few suffixes.

The default value of this setting is dictionary-dependent, so the caller should set it explicitly if it really matters.

Specifies what dictionary to use instead of the default. Dictionary names are actually file names, and are searched for according to the following rule: if the name does not contain a slash, it is looked for in the directory containing the default dictionary, typically /usr/lib. Otherwise, it is used as is: if it does not begin with a slash, it is construed from the current directory.

If no argument is given, the default dictionary will be used.

Specifies what personal dictionary to use instead of the default.

Dictionary names are actually file names, and are searched for according to the following rule: if the name begins with a slash, it is used as is (i.e. it is an absolute path name). Otherwise, it is construed as relative to the user's home directory ($HOME).

If no argument is given, the default personal dictionary will be used.

ispell options:

  -w chars
         Specify additional characters that can be part of a word.

Lingua::Ispell uses the external program ispell, which is the International Ispell, available at

  http://fmg-www.cs.ucla.edu/geoff/ispell.html

as well as various archives and mirrors, such as

  ftp://ftp.math.orst.edu/pub/ispell-3.1/

This is a very popular program, and may already be installed on your system.

Lingua::Ispell also uses the standard perl modules FileHandle, IPC::Open2, and Carp.

jdporter@min.net (John Porter)

This module is free software; you may redistribute it and/or modify it under the same terms as Perl itself.