PDL::Slices -- Indexing, slicing, and dicing

  use PDL;
  $a = ones(3,3);
  $b = $a->slice('-1:0,(1)');
  $c = $a->dummy(2);

This package provides many of the powerful PerlDL core index manipulation routines. These routines mostly allow two-way data flow, so you can modify your data in the most convenient representation. For example, you can make a 1000x1000 unit matrix with

 $a = zeroes(1000,1000);
 $a->diagonal(0,1) ++;

which is quite efficient. See PDL::Indexing and PDL::Tips for more examples.

Slicing is so central to the PDL language that a special compile-time syntax has been introduced to handle it compactly; see PDL::NiceSlice for details.

PDL indexing and slicing functions usually include two-way data flow, so that you can separate the actions of reshaping your data structures and modifying the data themselves. Two special methods, copy and sever, help you control the data flow connection between related variables.

 $b = $a->slice("1:3"); # Slice maintains a link between $a and $b.
 $b += 5;               # $a is changed!

If you want to force a physical copy and no data flow, you can copy or sever the slice expression:

 $b = $a->slice("1:3")->copy;
 $b += 5;               # $a is not changed.

 $b = $a->slice("1:3")->sever;
 $b += 5;               # $a is not changed.

The difference between CWsever and CWcopy is that sever acts on (and returns) its argument, while copy produces a disconnected copy. If you say

 $b = $a->slice("1:3");
 $c = $b->sever;

then the variables CW$b and CW$c point to the same object but with CW->copy they would not.

For the moment, you can't slice the empty piddle. This should probably change: slices of the empty piddle should probably return the empty piddle.

Many types of index errors are reported far from the indexing operation that caused them. This is caused by the underlying architecture: slice() sets up a mapping between variables, but that mapping isn't tested for correctness until it is used (potentially much later).

  Signature: (P(); C())

Internal vaffine identity function.

s_identity does handle bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (a(n); int ind(); [oca] c())

CWindex and CWindex2d provide rudimentary index indirection.

 $c = index($source,$ind);
 $c = index2d($source2,$ind1,$ind2);

use the CW$ind variables as indices to look up values in CW$source. CWindex2d uses separate piddles for X and Y coordinates. For more general N-dimensional indexing, see PDL::Slices or the PDL::NiceSlice syntax.

These functions are two-way, i.e. after

 $c = $a->index(pdl[0,5,8]);
 $c .= pdl [0,2,4];

the changes in CW$c will flow back to CW$a.

CWindex provids simple threading: multiple-dimensioned arrays are treated as collections of 1-D arrays, so that

 $a = xvals(10,10)+10*yvals(10,10);
 $b = $a->index(3);
 $c = $a->index(9-xvals(1));

puts a single column from CW$a into CW$b, and puts a single element from each column of CW$a into CW$c. If you want to extract multiple columns from an array in one operation, see dice or indexND.

index barfs if any of the index values are bad.

  Signature: (a(na,nb); int inda(); int indb(); [oca] c())

CWindex and CWindex2d provide rudimentary index indirection.

 $c = index($source,$ind);
 $c = index2d($source2,$ind1,$ind2);

use the CW$ind variables as indices to look up values in CW$source. CWindex2d uses separate piddles for X and Y coordinates. For more general N-dimensional indexing, see PDL::Slices or the PDL::NiceSlice syntax.

These functions are two-way, i.e. after

 $c = $a->index(pdl[0,5,8]);
 $c .= pdl [0,2,4];

the changes in CW$c will flow back to CW$a.

CWindex provids simple threading: multiple-dimensioned arrays are treated as collections of 1-D arrays, so that

 $a = xvals(10,10)+10*yvals(10,10);
 $b = $a->index(3);
 $c = $a->index(9-xvals(1));

puts a single column from CW$a into CW$b, and puts a single element from each column of CW$a into CW$c. If you want to extract multiple columns from an array in one operation, see dice or indexND.

index2d barfs if either of the index values are bad.

  Backwards-compatibility alias for indexND

  Find selected elements in an N-D piddle, with optional boundary handling

  $out = $source->indexND( $index, [$method] )

  $source = 10*xvals(10,10) + yvals(10,10);
  $index  = pdl([[2,3],[4,5]],[[6,7],[8,9]]);
  print $source->indexND( $index );

  [
   [23 45]
   [67 89]
  ]

IndexND collapses CW$index by lookup into CW$source. The 0th dimension of CW$index is treated as coordinates in CW$source, and the return value has the same dimensions as the rest of CW$index. The returned elements are looked up from CW$source. Dataflow works propagated assignment flows back into CW$source.

IndexND and IndexNDb were originally separate routines but they are both now implemented as a call to range, and have identical syntax to one another.

  Signature: (P(); C(); SV *index; SV *size; SV *boundary)

Engine for range

Same calling convention as range, but you must supply all parameters. CWrangeb is marginally faster as it makes a direct PP call, avoiding the perl argument-parsing step.

Extract selected chunks from a source piddle, with boundary conditions

        $out = $source->range($index,[$size,[$boundary]])

Returns elements or rectangular slices of the original piddle, indexed by the CW$index piddle. CW$source is an N-dimensional piddle, and CW$index is a piddle whose first dimension has order up to N. Each row of CW$index is treated as coordinates of a single value or chunk from CW$source, specifying the location(s) to extract.

If you specify a single index location, then range is essentially an expensive slice, with controllable boundary conditions.

INPUTS

CW$index and CW$size can be piddles or array refs such as you would feed to zeroes and its ilk. If CW$index's 0th dimension has order higher than the number of dimensions in CW$source, then CW$source is treated as though it had trivial dummy dimensions of order 1, up to the required size to be indexed by CW$index so if your source array is 1-D and your index array is a list of 3-vectors, you get two dummy dimensions of order 1 on the end of your source array.

You can extract single elements or N-D rectangular ranges from CW$source, by setting CW$size. If CW$size is undef or zero, then you get a single sample for each row of CW$index. This behavior is similar to indexNDb, which is in fact implemented as a call to range.

If CW$size is positive then you get a range of values from CW$source at each location, and the output has extra dimensions allocated for them. CW$size can be a scalar, in which case it applies to all dimensions, or an N-vector, in which case each element is applied independently to the corresponding dimension in CW$source. See below for details.

CW$boundary is a number, string, or list ref indicating the type of boundary conditions to use when ranges reach the edge of CW$source. If you specify no boundary conditions the default is to forbid boundary violations on all axes. If you specify exactly one boundary condition, it applies to all axes. If you specify more (as elements of a list ref, or as a packed string, see below), then they apply to dimensions in the order in which they appear, and the last one applies to all subsequent dimensions. (This is less difficult than it sounds; see the examples below).

0 (synonyms: 'f','forbid') (default)

Ranges are not allowed to cross the boundary of the original PDL. Disallowed ranges throw an error. The errors are thrown at evaluation time, not at the time of the range call (this is the same behavior as slice).

1 (synonyms: 't','truncate')

Values outside the original piddle get BAD if you've got bad value support compiled into your PDL; or 0 if you haven't. Reverse dataflow works OK for the portion of the child that is in-bounds. The out-of-bounds part of the child is reset to (BAD|0) during each dataflow operation, but execution continues.

2 (synonyms: 'e','x','extend')

Values that would be outside the original piddle point instead to the nearest allowed value within the piddle. See the CAVEAT below on mappings that are not single valued.

3 (synonyms: 'p','periodic')

Periodic boundary conditions apply: the numbers in CW$index are applied, strict-modulo the corresponding dimensions of CW$source. This is equivalent to duplicating the CW$source piddle throughout N-D space. See the CAVEAT below about mappings that are not single valued.

4 (synonyms: 'm','mirror')

Mirror-reflection periodic boundary conditions apply. See the CAVEAT below about mappings that are not single valued.

The boundary condition identifiers all begin with unique characters, so you can feed in multiple boundary conditions as either a list ref or a packed string. (The packed string is marginally faster to run). For example, the four expressions [0,1], ['forbid','truncate'], ['f','t'], and 'ft' all specify that violating the boundary in the 0th dimension throws an error, and all other dimensions get truncated.

If you feed in a single string, it is interpreted as a packed boundary array if all of its characters are valid boundary specifiers (e.g. 'pet'), but as a single word-style specifier if they are not (e.g. 'forbid').

OUTPUT

The output threads over both CW$index and CW$source. Because implicit threading can happen in a couple of ways, a little thought is needed. The returned dimension list is stacked up like this:

   (index thread dims), (index dims (size)), (source thread dims)

The first few dims of the output correspond to the extra dims of CW$index (beyond the 0 dim). They allow you to pick out individual ranges from a large, threaded collection.

The middle few dims of the output correspond to the size dims specified in CW$size, and contain the range of values that is extracted at each location in CW$source. Every nonzero element of CW$size is copied to the dimension list here, so that if you feed in (for example) CW$size = [2,0,1] you get an index dim list of CW(2,1).

The last few dims of the output correspond to extra dims of CW$source beyond the number of dims indexed by CW$index. These dims act like ordinary thread dims, because adding more dims to CW$source just tacks extra dims on the end of the output. Each source thread dim ranges over the entire corresponding dim of CW$source.

Dataflow: Dataflow is bidirectional.

Examples: Here are basic examples of CWrange operation, showing how to get ranges out of a small matrix. The first few examples show extraction and selection of individual chunks. The last example shows how to mark loci in the original matrix (using dataflow).

 perldl> $src = 10*xvals(10,5)+yvals(10,5)
 perldl> print $src->range([2,3])    # Cut out a single element
 23
 perldl> print $src->range([2,3],1)  # Cut out a single 1x1 block
 [
  [23]
 ]
 perldl> print $src->range([2,3], [2,1]) # Cut a 2x1 chunk
 [
  [23 33]
 ]
 perldl> print $src->range([[2,3]],[2,1]) # Trivial list of 1 chunk
 [
  [
   [23]
   [33]
  ]
 ]
 perldl> print $src->range([[2,3],[0,1]], [2,1])   # two 2x1 chunks
 [
  [
   [23  1]
   [33 11]
  ]
 ]
 perldl> # A 2x2 collection of 2x1 chunks
 perldl> print $src->range([[[1,1],[2,2]],[[2,3],[0,1]]],[2,1])
 [
  [
   [
    [11 22]
    [23  1]
   ]
   [
    [21 32]
    [33 11]
   ]
  ]
 ]
 perldl> $src = xvals(5,3)*10+yvals(5,3)
 perldl> print $src->range(3,1)  # Thread over y dimension in $src 
 [
  [30]
  [31]
  [32]
 ]

 perldl> $src = zeroes(5,4);
 perldl> $src->range(pdl([2,3],[0,1]),pdl(2,1)) .= xvals(2,2,1) + 1
 perldl> print $src
 [
  [0 0 0 0 0]
  [2 2 0 0 0]
  [0 0 0 0 0]
  [0 0 1 1 0]
 ]

CAVEAT: It's quite possible to select multiple ranges that intersect. In that case, modifying the ranges doesn't have a guaranteed result in the original PDL the result is an arbitrary choice among the valid values. For some things that's OK; but for others it's not. In particular, this doesn't work:

    perldl> $photon_list = new PDL::RandVar->sample(5)->reshape(2,250)*10
    perldl> histogram = zeroes(10,10)
    perldl> histogram->range($photon_list,1)++;  #not what you wanted

The reason is that if two photons land in the same bin, then that bin doesn't get incremented twice. (That may get fixed in a later version...)

PERMISSIVE RANGING: If CW$index has too many dimensions compared to CW$source, then CW$source is treated as though it had dummy dimensions of order 1, up to the required number of dimensions. These virtual dummy dimensions have the usual boundary conditions applied to them.

If the 0 dimension of CW$index is ludicrously large (if its order is more than 5 greater than the number of dims in the source PDL) then range will insist that you specify a size in every dimension, to make sure that you know what you're doing. That catches a common error with range usage: confusing the initial dim (usually of low order) with another index dim (perhaps of order 1000).

EFFICIENCY: Because CWrange isn't an affine transformation (it involves lookup into a list of N-D indices), it is somewhat memory-inefficient for long lists of ranges, and keeping dataflow open is much slower than for affine transformations (which don't have to copy data around).

Doing operations on small subfields of a large range is inefficient because the engine must flow the entire range back into the original PDL with every atomic perl operation, even if you only touch a single element. One way to speed up such code is to sever your range, so that PDL doesn't have to copy the data with each operation, then copy the elements explicitly at the end of your loop. Here's an example that labels each region in a range sequentially, using many small operations rather than a single xvals assignment:

  ### How to make a collection of small ops run fast with range...
  $a =  $data->range($index, $sizes, $bound)->sever; 
  $aa = $data->range($index, $sizes, $bound);        
  map { $a($_ - 1) .= $_; } (1..$a->nelem);    # Lots of little ops
  $aa .= $a;

CWrange is a perl front-end to a PP function, CWrangeb. Calling CWrangeb is marginally faster but requires that you include all arguments.

DEVEL NOTES

* index thread dimensions are effectively clumped internally. This makes it easier to loop over the index array but a little more brain-bending to tease out the algorithm.

* Currently the index threads really do run fastest in memory; this is probably the wrong direction to thread, for fastest behavior modifying the appropriate dimincs in RedoDims ought to take care of it.

rangeb does handle bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (int a(n); b(n); [o]c(m))

Run-length decode a vector

Given a vector CW$a of the numbers of instances of values CW$b, run-length decode to CW$c.

 rld($a,$b,$c=null);

rld does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (c(n); int [o]a(n); [o]b(n))

Run-length encode a vector

Given vector CW$c, generate a vector CW$a with the number of each element, and a vector CW$b of the unique values. Only the elements up to the first instance of CW0 in CW$a should be considered.

 rle($c,$a=null,$b=null);

rle does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int n1; int n2)

exchange two dimensions

Negative dimension indices count from the end.

The command

 $b = $a->xchg(2,3);

creates CW$b to be like CW$a except that the dimensions 2 and 3 are exchanged with each other i.e.

 $b->at(5,3,2,8) == $a->at(5,3,8,2)

xchg does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

Re-orders the dimensions of a PDL based on the supplied list.

Similar to the xchg method, this method re-orders the dimensions of a PDL. While the xchg method swaps the position of two dimensions, the reorder method can change the positions of many dimensions at once.

 # Completely reverse the dimension order of a 6-Dim array.
 $reOrderedPDL = $pdl->reorder(5,4,3,2,1,0);

The argument to reorder is an array representing where the current dimensions should go in the new array. In the above usage, the argument to reorder CW(5,4,3,2,1,0) indicates that the old dimensions (CW$pdl's dims) should be re-arranged to make the new pdl (CW$reOrderPDL) according to the following:

   Old Position   New Position
   ------------   ------------
   5              0
   4              1
   3              2
   2              3
   1              4
   0              5

Example:

 perldl> $a = sequence(5,3,2);    # Create a 3-d Array
 perldl> p $a
 [
  [
   [ 0  1  2  3  4]
   [ 5  6  7  8  9]
   [10 11 12 13 14]
  ]
  [
   [15 16 17 18 19]
   [20 21 22 23 24]
   [25 26 27 28 29]
  ]
 ]
 perldl> p $a->reorder(2,1,0); # Reverse the order of the 3-D PDL
 [
  [
   [ 0 15]
   [ 5 20]
   [10 25]
  ]
  [
   [ 1 16]
   [ 6 21]
   [11 26]
  ]
  [
   [ 2 17]
   [ 7 22]
   [12 27]
  ]
  [
   [ 3 18]
   [ 8 23]
   [13 28]
  ]
  [
   [ 4 19]
   [ 9 24]
   [14 29]
  ]
 ]

The above is a simple example that could be duplicated by calling CW$a->xchg(0,2), but it demonstrates the basic functionality of reorder.

As this is an index function, any modifications to the result PDL will change the parent.

  Signature: (P(); C(); int n1; int n2)

move a dimension to another position

The command

 $b = $a->mv(4,1);

creates CW$b to be like CW$a except that the dimension 4 is moved to the place 1, so:

 $b->at(1,2,3,4,5,6) == $a->at(1,5,2,3,4,6);

The other dimensions are moved accordingly. Negative dimension indices count from the end.

mv does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int nth; int from; int step; int nsteps)

experimental function - not for public use

 $a = oneslice();

This is not for public use currently. See the source if you have to. This function can be used to accomplish run-time changing of transformations i.e. changing the size of some piddle at run-time.

However, the mechanism is not yet finalized and this is just a demonstration.

oneslice does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); char* str)

Extract a rectangular slice of a piddle, from a string specifier.

CWslice was the original Swiss-army-knife PDL indexing routine, but is largely superseded by the NiceSlice source prefilter and its associated nslice method. It is still used as the basic underlying slicing engine for nslice, and is especially useful in particular niche applications.

 $a->slice('1:3');  #  return the second to fourth elements of $a
 $a->slice('3:1');  #  reverse the above
 $a->slice('-2:1'); #  return last-but-one to second elements of $a

The argument string is a comma-separated list of what to do for each dimension. The current formats include the following, where a, b and c are integers and can take legal array index values (including -1 etc):

:

takes the whole dimension intact.

''

(nothing) is a synonym for : (This means that CW$a->slice(':,3') is equal to CW$a->slice(',3')).

a

slices only this value out of the corresponding dimension.

(a)

means the same as a by itself except that the resulting dimension of length one is deleted (so if CW$a has dims CW(3,4,5) then CW$a->slice(':,(2),:') has dimensions CW(3,5) whereas CW$a->slice(':,2,:') has dimensions CW(3,1,5)).

a:b

slices the range a to b inclusive out of the dimension.

a:b:c

slices the range a to b, with step c (i.e. CW3:7:2 gives the indices CW(3,5,7)). This may be confusing to Matlab users but several other packages already use this syntax.

'*'

inserts an extra dimension of width 1 and

'*a'

inserts an extra (dummy) dimension of width a.

An extension is planned for a later stage allowing CW$a->slice('(=1),(=1|5:8),3:6(=1),4:6') to express a multidimensional diagonal of CW$a.

Trivial out-of-bounds slicing is allowed: if you slice a source dimension that doesn't exist, but only index the 0th element, then CWslice treats the source as if there were a dummy dimension there. The following are all equivalent:

        xvals(5)->dummy(1,1)->slice('(2),0')  # Add dummy dim, then slice
        xvals(5)->slice('(2),0')              # Out-of-bounds slice adds dim.
        xvals(5)->slice((2),0)                # NiceSlice syntax
        xvals(5)->((2))->dummy(0,1)           # NiceSlice syntax

This is an error:

        xvals(5)->slice('(2),1')        # nontrivial out-of-bounds slice dies

Because slicing doesn't directly manipulate the source and destination pdl it just sets up a transformation between them indexing errors often aren't reported until later. This is either a bug or a feature, depending on whether you prefer error-reporting clarity or speed of execution.

slice does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

Returns array of column numbers requested

 line $pdl->using(1,2);

Plot, as a line, column 1 of CW$pdl vs. column 2

 perldl> $pdl = rcols("file");
 perldl> line $pdl->using(1,2);

  Signature: (P(); C(); SV *list)

Returns the multidimensional diagonal over the specified dimensions.

The diagonal is placed at the first (by number) dimension that is diagonalized. The other diagonalized dimensions are removed. So if CW$a has dimensions CW(5,3,5,4,6,5) then after

 $b = $a->diagonal(0,2,5);

the piddle CW$b has dimensions CW(5,3,4,6) and CW$b->at(2,1,0,1) refers to CW$a->at(2,1,2,0,1,2).

NOTE: diagonal doesn't handle threadids correctly. XXX FIX

diagonalI does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int nthdim; int step; int n)

Returns a piddle of lags to parent.

Usage:

  $lags = $a->lags($nthdim,$step,$nlags);

I.e. if CW$a contains

 [0,1,2,3,4,5,6,7]

then

 $b = $a->lags(0,2,2);

is a (5,2) matrix

 [2,3,4,5,6,7]
 [0,1,2,3,4,5]

This order of returned indices is kept because the function is called lags i.e. the nth lag is n steps behind the original.

CW$step and CW$nlags must be positive. CW$nthdim can be negative and will then be counted from the last dim backwards in the usual way (-1 = last dim).

lags does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int nthdim; int nsp)

Splits a dimension in the parent piddle (opposite of clump)

After

 $b = $a->splitdim(2,3);

the expression

 $b->at(6,4,x,y,3,6) == $a->at(6,4,x+3*y)

is always true (CWx has to be less than 3).

splitdim does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (x(n); int shift(); [oca]y(n))

Shift vector elements along with wrap. Flows data back&forth.

rotate does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int id; SV *list)

internal

Put some dimensions to a threadid.

 $b = $a->threadI(0,1,5); # thread over dims 1,5 in id 1

threadI does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C())

A vaffine identity transformation (includes thread_id copying).

Mainly for internal use.

identvaff does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

  Signature: (P(); C(); int atind)

All threaded dimensions are made real again.

See [TBD Doc] for details and examples.

unthread does not process bad values. It will set the bad-value flag of all output piddles if the flag is set for any of the input piddles.

Dice rows/columns/planes out of a PDL using indexes for each dimension.

This function can be used to extract irregular subsets along many dimension of a PDL, e.g. only certain rows in an image, or planes in a cube. This can of course be done with the usual dimension tricks but this saves having to figure it out each time!

This method is similar in functionality to the slice method, but slice requires that contiguous ranges or ranges with constant offset be extracted. ( i.e. slice requires ranges of the form CW1,2,3,4,5 or CW2,4,6,8,10). Because of this restriction, slice is more memory efficient and slightly faster than dice

 $slice = $data->dice([0,2,6],[2,1,6]); # Dicing a 2-D array

The arguments to dice are arrays (or 1D PDLs) for each dimension in the PDL. These arrays are used as indexes to which rows/columns/cubes,etc to dice-out (or extract) from the CW$data PDL.

Use CWX to select all indices along a given dimension (compare also mslice). As usual (in slicing methods) trailing dimensions can be omitted implying CWX'es for those.

 perldl> $a = sequence(10,4)
 perldl> p $a
 [
  [ 0  1  2  3  4  5  6  7  8  9]
  [10 11 12 13 14 15 16 17 18 19]
  [20 21 22 23 24 25 26 27 28 29]
  [30 31 32 33 34 35 36 37 38 39]
 ]
 perldl> p $a->dice([1,2],[0,3]) # Select columns 1,2 and rows 0,3
 [
  [ 1  2]
  [31 32]
 ]
 perldl> p $a->dice(X,[0,3])
 [
  [ 0  1  2  3  4  5  6  7  8  9]
  [30 31 32 33 34 35 36 37 38 39]
 ]
 perldl> p $a->dice([0,2,5])
 [
  [ 0  2  5]
  [10 12 15]
  [20 22 25]
  [30 32 35]
 ]

As this is an index function, any modifications to the slice change the parent (use the CW.= operator).

Dice rows/columns/planes from a single PDL axis (dimension) using index along a specified axis

This function can be used to extract irregular subsets along any dimension, e.g. only certain rows in an image, or planes in a cube. This can of course be done with the usual dimension tricks but this saves having to figure it out each time!

 $slice = $data->dice_axis($axis,$index);

 perldl> $a = sequence(10,4)
 perldl> $idx = pdl(1,2)
 perldl> p $a->dice_axis(0,$idx) # Select columns
 [
  [ 1  2]
  [11 12]
  [21 22]
  [31 32]
 ]
 perldl> $t = $a->dice_axis(1,$idx) # Select rows
 perldl> $t.=0
 perldl> p $a
 [
  [ 0  1  2  3  4  5  6  7  8  9]
  [ 0  0  0  0  0  0  0  0  0  0]
  [ 0  0  0  0  0  0  0  0  0  0]
  [30 31 32 33 34 35 36 37 38 39]
 ]

The trick to using this is that the index selects elements along the dimensions specified, so if you have a 2D image CWaxis=0 will select certain CWX values - i.e. extract columns

As this is an index function, any modifications to the slice change the parent.

Copyright (C) 1997 Tuomas J. Lukka. Contributions by Craig DeForest, deforest@boulder.swri.edu. All rights reserved. There is no warranty. You are allowed to redistribute this software / documentation under certain conditions. For details, see the file COPYING in the PDL distribution. If this file is separated from the PDL distribution, the copyright notice should be included in the file.