Perl6::Slurp - Implements the Perl 6 'slurp' built-in

    use Perl6::Slurp;

        # Slurp a file by name...

        $file_contents = slurp 'filename';
        $file_contents = slurp '<filename';
        $file_contents = slurp '<', 'filename';
        $file_contents = slurp '+<', 'filename';

        # Slurp a file via an (already open!) handle...

        $file_contents = slurp \*STDIN;
        $file_contents = slurp $filehandle;
        $file_contents = slurp IO::File->new('filename');

        # Slurp a string...

        $str_contents = slurp \$string;
        $str_contents = slurp '<', \$string;

        # Slurp a pipe...

        $str_contents = slurp 'tail -20 $filename |';
        $str_contents = slurp '-|', 'tail', -20, $filename;

        # Slurp with no source slurps from whatever $_ indicates...

        for (@files) {
                $contents .= slurp;
        }

        # ...or from the entire ARGV list, if $_ is undefined...

        $_ = undef;
        $ARGV_contents = slurp;

        # Specify I/O layers as part of mode...

        $file_contents = slurp '<:raw', $file;
        $file_contents = slurp '<:utf8', $file;
        $file_contents = slurp '<:raw :utf8', $file;

        # Specify I/O layers as separate options...

        $file_contents = slurp $file, {raw=>1};
        $file_contents = slurp $file, {utf8=>1};
        $file_contents = slurp $file, {raw=>1}, {utf8=>1};
        $file_contents = slurp $file, [raw=>1, utf8=>1];

        # Specify input record separator...

        $file_contents = slurp $file, {irs=>"\n\n"};
        $file_contents = slurp '<', $file, {irs=>"\n\n"};
        $file_contents = slurp {irs=>"\n\n"}, $file;

        # Input record separator can be regex...

        $file_contents = slurp $file, {irs=>qr/\n+/};
        $file_contents = slurp '<', $file, {irs=>qr/\n+|\t{2,}};

        # Specify autochomping...

        $file_contents = slurp $file, {chomp=>1};
        $file_contents = slurp {chomp=>1}, $file;
        $file_contents = slurp $file, {chomp=>1, irs=>"\n\n"};
        $file_contents = slurp $file, {chomp=>1, irs=>qr/\n+/};

        # Specify autochomping that replaces irs
        # with another string...

        $file_contents = slurp $file, {irs=>"\n\n", chomp=>"\n"};
        $file_contents = slurp $file, {chomp=>"\n\n"}, {irs=>qr/\n+/};

        # Specify autochomping that replaces
        # irs with a dynamically computed string...

        my $n = 1;
        $file_contents = slurp $file, {chomp=>sub{ "\n#line ".$n++."\n"};

        # Slurp in a list context...

        @lines = slurp 'filename';
        @lines = slurp $filehandle;
        @lines = slurp \$string;
        @lines = slurp '<:utf8', 'filename', {irs=>"\x{2020}", chomp=>"\n"};

CWslurp takes:

•

a filename,

•

a filehandle,

•

a typeglob reference,

•

an IO::File object, or

•

a scalar reference,

converts it to an input stream if necessary, and reads in the entire stream. If CWslurp fails to set up or read the stream, it throws an exception.

If no data source is specified CWslurp uses the value of CW$_ as the source. If CW$_ is undefined, CWslurp uses the CW@ARGV list, and magically slurps the contents of all the sources listed in CW@ARGV. Note that the same magic is also applied if you explicitly slurp <*ARGV>, so the following three input operations:

        $contents = join "", <ARGV>;

        $contents = slurp \*ARGV;

        $/ = undef;
        $contents = slurp;

are identical in effect.

In a scalar context CWslurp returns the stream contents as a single string. If the stream is at EOF, it returns an empty string. In a list context, it splits the contents after the appropriate input record separator and returns the resulting list of strings.

You can set the input record separator (CW{ irs => $your_irs_here}) for the input operation. The separator can be specified as a string or a regex. Note that an explicit input record separator has no effect in a scalar context, since CWslurp always reads in everything anyway.

In a list context, changing the separator can change how the input is broken up within the list that is returned.

If an input record separator is not explicitly specified, CWslurp defaults to CW"\n" (not to the current value of CW$/ E<ndash> since Perl 6 doesn't have a CW$/);

You can also tell CWslurp to automagically CWchomp the input as it is read in, by specifying: (CW{ chomp => 1 })

Better still, you can tell CWslurp to automagically CWchomp the input and replace what it chomps with another string, by specifying: (CW{ chomp => "another string" })

You can also tell CWslurp to compute the replacement string on-the-fly by specifying a subroutine as the CWchomp value: (CW{ chomp => sub{...} }). This subroutine is passed the string being chomped off, so for example you could squeeze single newlines to a single space and multiple conseqcutive newlines to a two newlines with:

        sub squeeze { 
                my ($removed) = @_;
                if ($removed =~ tr/\n/\n/ == 1) { return " " }
                else                            { return "\n\n"; }
        }

        print slurp(\*DATA, {irs=>qr/[ \t]*\n+/, chomp=>\&squeeze}), "\n";

Which would transform:

        This is the 
        first paragraph

        This is the 
        second
        paragraph

        This, the
        third

        This one is
        the
        very 
        last

to:

        This is the first paragraph

        This is the second paragraph

        This, the third

        This one is the very last

Autochomping works in both scalar and list contexts. In scalar contexts every instance of the input record separator will be removed (or replaced) within the returned string. In list context, each list item returned with its terminating separator removed (or replaced).

You can specify I/O layers, either using the Perl 5 notation:

    slurp "<:layer1 :layer2 :etc", $filename;

or as an array of options:

    slurp $filename, [layer1=>1, layer2=>1, etc=>1];
    slurp [layer1=>1, layer2=>1, etc=>1], $filename;

or as individual options (each of which must be in a separate hash):

    slurp $filename, {layer1=>1}, {layer2=>1}, {etc=>1};
    slurp {layer1=>1}, {layer2=>1}, {etc=>1}, $filename;

(...which, of course, would look much cooler in Perl 6:

    # Perl 6 only :-(

    slurp $filename, :layer1 :layer2 :etc;
    slurp :layer1 :layer2 :etc, $filename;

)

A common mistake is to put all the options together in one hash:

    slurp $filename, {layer1=>1, layer2=>1, etc=>1};

This is almost always a disaster, since the order of I/O layers is usually critical, and placing them all in one hash effectively randomizes that order. Use an array instead:

    slurp $filename, [layer1=>1, layer2=>1, etc=>1];

The syntax and semantics of Perl 6 is still being finalized and consequently is at any time subject to change. That means the same caveat applies to this module.

Requires: Perl 5.8.0, Perl6::Export

Damian Conway (damian@conway.org)

 Copyright (c) 2003, Damian Conway. All Rights Reserved.
 This module is free software. It may be used, redistributed
    and/or modified under the same terms as Perl itself.