Regexp::Common::number -- provide regexes for numbers

    use Regexp::Common qw /number/;

    while (<>) {
        /^$RE{num}{int}$/                and  print "Integer\n";
        /^$RE{num}{real}$/               and  print "Real\n";
        /^$RE{num}{real}{-base => 16}$/  and  print "Hexadecimal real\n";
    }

Please consult the manual of Regexp::Common for a general description of the works of this interface.

Do not use this module directly, but load it via Regexp::Common. Returns a pattern that matches an integer.

If CW-base => CIBCW is specified, the integer is in base B, with CW2 <= CIBCW <= 36. For bases larger than 10, upper case letters are used. The default base is 10.

If CW-sep => CIPCW is specified, the pattern P is required as a grouping marker within the number. If this option is not given, no grouping marker is used.

If CW-group => CINCW is specified, digits between grouping markers must be grouped in sequences of exactly N digits. The default value of N is 3. If CW-group => CIN,MCW is specified, digits between grouping markers must be grouped in sequences of at least N digits, and at most M digits. This option is ignored unless the CW-sep option is used.

If CW-places => CINCW is specified, the integer recognized must be exactly N digits wide. If CW-places => CIN,MCW is specified, the integer must be at least N wide, and at most M characters. There is no default, which means that integers are unlimited in size. This option is ignored if the CW-sep option is used.

For example:

 $RE{num}{int}                          # match 1234567
 $RE{num}{int}{-sep=>','}               # match 1,234,567
 $RE{num}{int}{-sep=>',?'}              # match 1234567 or 1,234,567
 $RE{num}{int}{-sep=>'.'}{-group=>4}    # match 1.2345.6789

Under CW-keep (see Regexp::Common):

$1

captures the entire number

$2

captures the optional sign of the number

$3

captures the complete set of digits Returns a pattern that matches a floating-point number.

If CW-base=CINCW is specified, the number is assumed to be in that base (with A..Z representing the digits for 11..36). By default, the base is 10.

If CW-radix=CIPCW is specified, the pattern P is used as the radix point for the number (i.e. the decimal point in base 10). The default is CWqr/[.]/.

If CW-places=CINCW is specified, the number is assumed to have exactly N places after the radix point. If CW-places=CIM,NCW is specified, the number is assumed to have between M and N places after the radix point. By default, the number of places is unrestricted.

If CW-sep=CIPCW specified, the pattern P is required as a grouping marker within the pre-radix section of the number. By default, no separator is allowed.

If CW-group=CINCW is specified, digits between grouping separators must be grouped in sequences of exactly N characters. The default value of N is 3.

If CW-expon=CIPCW is specified, the pattern P is used as the exponential marker. The default value of P is CWqr/[Ee]/.

For example:

 $RE{num}{real}                  # matches 123.456 or -0.1234567
 $RE{num}{real}{-places=>2}      # matches 123.45 or -0.12
 $RE{num}{real}{-places=>'0,3'}  # matches 123.456 or 0 or 9.8
 $RE{num}{real}{-sep=>'[,.]?'}   # matches 123,456 or 123.456
 $RE{num}{real}{-base=>3'}       # matches 121.102

Under CW-keep:

$1

captures the entire match

$2

captures the optional sign of the number

$3

captures the complete mantissa

$4

captures the whole number portion of the mantissa

$5

captures the radix point

$6

captures the fractional portion of the mantissa

$7

captures the optional exponent marker

$8

captures the entire exponent value

$9

captures the optional sign of the exponent

$10

captures the digits of the exponent A synonym for CW$RE{num}{real}{-base=>10}{...} A synonym for CW$RE{num}{real}{-base=>8}{...} A synonym for CW$RE{num}{real}{-base=>2}{...} A synonym for CW$RE{num}{real}{-base=>16}{...} The same as CW$RE{num}{real}, except that an exponent isn't allowed. Hence, this returns a pattern matching decimal numbers.

If CW-base=CINCW is specified, the number is assumed to be in that base (with A..Z representing the digits for 11..36). By default, the base is 10.

If CW-radix=CIPCW is specified, the pattern P is used as the radix point for the number (i.e. the decimal point in base 10). The default is CWqr/[.]/.

If CW-places=CINCW is specified, the number is assumed to have exactly N places after the radix point. If CW-places=CIM,NCW is specified, the number is assumed to have between M and N places after the radix point. By default, the number of places is unrestricted.

If CW-sep=CIPCW specified, the pattern P is required as a grouping marker within the pre-radix section of the number. By default, no separator is allowed.

If CW-group=CINCW is specified, digits between grouping separators must be grouped in sequences of exactly N characters. The default value of N is 3.

For example:

 $RE{num}{decimal}                  # matches 123.456 or -0.1234567
 $RE{num}{decimal}{-places=>2}      # matches 123.45 or -0.12
 $RE{num}{decimal}{-places=>'0,3'}  # matches 123.456 or 0 or 9.8
 $RE{num}{decimal}{-sep=>'[,.]?'}   # matches 123,456 or 123.456
 $RE{num}{decimal}{-base=>3'}       # matches 121.102

Under CW-keep:

$1

captures the entire match

$2

captures the optional sign of the number

$3

captures the complete mantissa

$4

captures the whole number portion of the mantissa

$5

captures the radix point

$6

captures the fractional portion of the mantissa Returns a pattern that matches a (decimal) square. Because Perl's arithmetic is lossy when using integers over about 53 bits, this pattern only recognizes numbers less than 9000000000000000, if one uses a Perl that is configured to use 64 bit integers. Otherwise, the limit is 2147483647. These restrictions were introduced in versions 2.116 and 2.117 of Regexp::Common. Regardless whether CW-keep was set, the matched number will be returned in CW$1.

This pattern is available for version 5.008 and up. Returns a pattern that matches an integer written in Roman numbers. Case doesn't matter. Only the more modern style, that is, no more than three repetitions of a letter, is recognized. The largest number matched is MMMCMXCIX, or 3999. Larger numbers cannot be expressed using ASCII characters. A future version will be able to deal with the Unicode symbols to match larger Roman numbers.

Under CW-keep, the number will be captured in CW$1.

 $Log: number.pm,v $
 Revision 2.108  2005/03/16 00:25:58  abigail
 Added -base, -places for  {num} {int}. Changed -group

 Revision 2.107  2004/12/28 23:45:51  abigail
 Perl 5.6.2 parses qq lib/Regexp/Common/number.pm{sep}[0-9]! incorrectly

 Revision 2.106  2004/12/28 23:27:58  abigail
 Replaced C<\d> with [0-9] (Unicode reasons)

 Revision 2.105  2004/07/01 10:11:27  abigail
 Fixed problems with 32bit integer Perls

 Revision 2.104  2004/06/30 09:14:54  abigail
 Restricted recognition of square numbers to numbers less than
 9000000000000000 to avoid round-off errors.

 Revision 2.103  2003/03/12 22:24:25  abigail
 Decimal numbers

 Revision 2.102  2003/02/10 21:34:24  abigail
 Added VERSION

 Revision 2.101  2003/02/01 22:55:31  abigail
 Changed Copyright years

 Revision 2.100  2003/01/21 23:19:40  abigail
 The whole world understands RCS/CVS version numbers, that 1.9 is an
 older version than 1.10. Except CPAN. Curse the idiot(s) who think
 that version numbers are floats (in which universe do floats have
 more than one decimal dot?).
 Everything is bumped to version 2.100 because CPAN couldn't deal
 with the fact one file had version 1.10.

 Revision 1.6  2002/12/27 23:33:15  abigail
 Roman numbers.

 Revision 1.5  2002/08/23 13:09:13  abigail
 Cosmetic POD changes.

 Revision 1.4  2002/08/23 12:51:26  abigail
 + Several occurances of 'numbers' changed to 'number'.
 + Fixed bugs in documentation.
 + Made example use anchors to make it more clear.
  (All due to Christopher Baker)

 Revision 1.3  2002/08/05 12:16:59  abigail
 Fixed 'Regex::' and 'Rexexp::' typos to 'Regexp::'
 (Found by Mike Castle).

 Revision 1.2  2002/07/30 16:37:59  abigail
 Removed outcommented code.

 Revision 1.1  2002/07/28 21:41:07  abigail
 Split off from Regexp::Common.

Regexp::Common for a general description of how to use this interface.

Damian Conway (damian@conway.org)

This package is maintained by Abigail (regexp-common@abigail.nl).

Bound to be plenty.

For a start, there are many common regexes missing. Send them in to regexp-common@abigail.nl.

     Copyright (c) 2001 - 2003, Damian Conway. All Rights Reserved.
       This module is free software. It may be used, redistributed
      and/or modified under the terms of the Perl Artistic License
            (see http://www.perl.com/perl/misc/Artistic.html)