enum ScrollMode { ScrNone, ScrMouse, ScrTimer, ScrDirect, ScrPage }

virtual void setValue (double val)

virtual void fitValue (double val)

virtual void incValue (int steps)

virtual void setReadOnly (bool)

void valueChanged (double value)

void sliderPressed ()

void sliderReleased ()

void sliderMoved (double value)

QwtSliderBase (Qt::Orientation orientation, QWidget *parent=0, const char *name=0, Qt::WFlags flags=0)

virtual ~QwtSliderBase ()

void setUpdateTime (int t)

void stopMoving ()

void setTracking (bool enable)

virtual void setMass (double val)

virtual double mass () const

virtual void setOrientation (Orientation o)

Orientation orientation () const

bool isReadOnly () const

bool isValid () const

void setValid (bool valid)

void setPosition (const QPoint &p)

virtual void valueChange ()

virtual void timerEvent (QTimerEvent *e)

virtual void mousePressEvent (QMouseEvent *e)

virtual void mouseReleaseEvent (QMouseEvent *e)

virtual void mouseMoveEvent (QMouseEvent *e)

virtual void keyPressEvent (QKeyEvent *e)

virtual void wheelEvent (QWheelEvent *e)

virtual double getValue (const QPoint &p)=0

virtual void getScrollMode (const QPoint &p, int &scrollMode, int &direction)=0

int d_scrollMode

double d_mouseOffset

int d_direction

int d_tracking

Constructor.

Definition at line 19 of file qwt_sldbase.cpp.

References QwtDblRange::setRange(), and setValue().

Destructor.

Definition at line 38 of file qwt_sldbase.cpp.

Set the slider's value to the nearest integer multiple of the step size.

See also: QwtSliderBase::setValue()

Reimplemented from QwtDblRange.

Definition at line 519 of file qwt_sldbase.cpp.

References QwtDblRange::fitValue(), and stopMoving().

Determine what to do when the user presses a mouse button.

This function is abstract and has to be implemented by derived classes. It is called on a mousePress event. The derived class can determine what should happen next in dependence of the position where the mouse was pressed by returning scrolling mode and direction. QwtSliderBase knows the following modes:

QwtSliderBase::ScrNone

Scrolling switched off. Don't change the value.

QwtSliderBase::ScrMouse

Change the value while the user keeps the button pressed and moves the mouse.

QwtSliderBase::ScrTimer

Automatic scrolling. Increment the value in the specified direction as long as the user keeps the button pressed.

QwtSliderBase::ScrPage

Automatic scrolling. Same as ScrTimer, but increment by page size.

Parameters: p point where the mouse was pressed

Return values: scrollMode The scrolling mode

direction direction: 1, 0, or -1.

Implemented in QwtDial, QwtSlider, and QwtWheel.

Referenced by mousePressEvent(), and wheelEvent().

Determine the value corresponding to a specified poind.

This is an abstract virtual function which is called when the user presses or releases a mouse button or moves the mouse. It has to be implemented by the derived class.

Parameters: p point

Implemented in QwtDial, QwtSlider, and QwtWheel.

Referenced by mousePressEvent(), and setPosition().

Increment the value by a specified number of steps.

Parameters: steps number of steps

Reimplemented from QwtDblRange.

Definition at line 531 of file qwt_sldbase.cpp.

References QwtDblRange::incValue(), and stopMoving().

In read only mode the slider can´t be controlled by mouse or keyboard.

Returns: TRUE if read only

See also: setReadOnly

Definition at line 66 of file qwt_sldbase.cpp.

Referenced by QwtDial::drawFocusIndicator(), keyPressEvent(), QwtDial::keyPressEvent(), QwtCompass::keyPressEvent(), mouseMoveEvent(), mousePressEvent(), mouseReleaseEvent(), and wheelEvent().

See also: QwtDblRange::isValid

Reimplemented from QwtDblRange.

Definition at line 66 of file qwt_sldbase.h.

References QwtDblRange::isValid().

Referenced by QwtDial::drawContents(), QwtKnob::drawKnob(), QwtAnalogClock::drawNeedle(), QwtCompass::drawScaleContents(), QwtSlider::drawSlider(), keyPressEvent(), QwtDial::keyPressEvent(), mouseMoveEvent(), mousePressEvent(), mouseReleaseEvent(), and wheelEvent().

Handles key events

•

Key_Down, KeyLeft

Decrement by 1

•

Key_Up, Key_Right

Increment by 1

See also: isReadOnly()

Reimplemented in QwtCompass, and QwtDial.

Definition at line 341 of file qwt_sldbase.cpp.

References QwtDblRange::incValue(), isReadOnly(), isValid(), orientation(), QwtDblRange::prevValue(), sliderMoved(), and QwtDblRange::value().

Returns: mass

See also: QwtSliderBase::setMass

Reimplemented in QwtWheel.

Definition at line 492 of file qwt_sldbase.cpp.

Referenced by QwtWheel::mass().

Mouse Move Event handler.

Definition at line 274 of file qwt_sldbase.cpp.

References QwtDblRange::exactPrevValue(), QwtDblRange::exactValue(), isReadOnly(), isValid(), QwtDblRange::prevValue(), setPosition(), sliderMoved(), and QwtDblRange::value().

Mouse press event handler.

Definition at line 115 of file qwt_sldbase.cpp.

References getScrollMode(), getValue(), isReadOnly(), isValid(), sliderPressed(), stopMoving(), and QwtDblRange::value().

Mouse Release Event handler.

Definition at line 166 of file qwt_sldbase.cpp.

References QwtDblRange::fitValue(), QwtDblRange::incPages(), isReadOnly(), isValid(), setPosition(), sliderReleased(), QwtDblRange::step(), stopMoving(), and QwtDblRange::value().

Returns: Orientation

See also: QwtSliderBase::setOrientation

Definition at line 85 of file qwt_sldbase.cpp.

Referenced by QwtSlider::drawSlider(), QwtSlider::drawThumb(), QwtWheel::drawWheel(), QwtWheel::drawWheelBackground(), QwtSlider::getScrollMode(), QwtWheel::getValue(), QwtSlider::getValue(), keyPressEvent(), QwtSlider::layoutSlider(), QwtWheel::minimumSizeHint(), QwtSlider::minimumSizeHint(), QwtSlider::QwtSlider(), QwtWheel::setOrientation(), QwtWheel::sizePolicy(), QwtSlider::sizePolicy(), and QwtSlider::xyPosition().

Set the slider's mass for flywheel effect.

If the slider's mass is greater then 0, it will continue to move after the mouse button has been released. Its speed decreases with time at a rate depending on the slider's mass. A large mass means that it will continue to move for a long time.

Derived widgets may overload this function to make it public.

Parameters: val new mass in kg

See also: QwtSliderBase::mass

Reimplemented in QwtWheel.

Definition at line 478 of file qwt_sldbase.cpp.

Referenced by QwtWheel::setMass().

Set the orientation.

Parameters: o Orientation. Allowed values are Qt::Horizontal and Qt::Vertical.

Definition at line 76 of file qwt_sldbase.cpp.

Referenced by QwtWheel::setOrientation(), and QwtSlider::setOrientation().

Move the slider to a specified point, adjust the value and emit signals if necessary. Definition at line 248 of file qwt_sldbase.cpp.

References QwtDblRange::fitValue(), and getValue().

Referenced by mouseMoveEvent(), and mouseReleaseEvent().

En/Disable read only mode

In read only mode the slider can´t be controlled by mouse or keyboard.

Parameters: readOnly Enables in case of TRUE

See also: isReadOnly

Definition at line 53 of file qwt_sldbase.cpp.

Referenced by QwtAnalogClock::QwtAnalogClock().

Enables or disables tracking.

If tracking is enabled, the slider emits a valueChanged() signal whenever its value changes (the default behaviour). If tracking is disabled, the value changed() signal will only be emitted if:.PD 0

•

the user releases the mouse button and the value has changed or

•

at the end of automatic scrolling.

Tracking is enabled by default.

Parameters: enable TRUE (enable) or FALSE (disable) tracking.

Definition at line 268 of file qwt_sldbase.cpp.

Specify the update interval for automatic scrolling.

Parameters: t update interval in milliseconds

See also: QwtSliderBase::getScrollMode()

Definition at line 106 of file qwt_sldbase.cpp.

Referenced by QwtKnob::QwtKnob(), and QwtWheel::QwtWheel().

See also: QwtDblRange::isValid

Reimplemented from QwtDblRange.

Definition at line 71 of file qwt_sldbase.h.

References QwtDblRange::setValid().

Referenced by QwtAnalogClock::setTime().

Move the slider to a specified value.

This function can be used to move the slider to a value which is not an integer multiple of the step size.

Parameters: val new value

See also: QwtSliderBase::fitValue

Reimplemented from QwtDblRange.

Definition at line 506 of file qwt_sldbase.cpp.

References QwtDblRange::setValue(), and stopMoving().

Referenced by QwtDial::keyPressEvent(), QwtCompass::keyPressEvent(), QwtSliderBase(), and QwtAnalogClock::setTime().

This signal is emitted when the user moves the slider with the mouse.

Parameters: value new value

Referenced by keyPressEvent(), QwtDial::keyPressEvent(), mouseMoveEvent(), and wheelEvent().

This signal is emitted when the user presses the movable part of the slider (start ScrMouse Mode).

Referenced by mousePressEvent().

This signal is emitted when the user releases the movable part of the slider.

Referenced by mouseReleaseEvent().

Stop updating if automatic scrolling is active.

Definition at line 92 of file qwt_sldbase.cpp.

Referenced by fitValue(), incValue(), mousePressEvent(), mouseReleaseEvent(), setValue(), and timerEvent().

Qt timer event.

Definition at line 388 of file qwt_sldbase.cpp.

References QwtDblRange::exactValue(), QwtDblRange::fitValue(), QwtDblRange::incPages(), QwtDblRange::step(), stopMoving(), and QwtDblRange::value().

Notify change of value

This function can be reimplemented by derived classes in order to keep track of changes, i.e. repaint the widget. The default implementation emits a valueChanged() signal if tracking is enabled.

Reimplemented from QwtDblRange.

Reimplemented in QwtDial, QwtSlider, and QwtWheel.

Definition at line 455 of file qwt_sldbase.cpp.

References QwtDblRange::value(), and valueChanged().

Referenced by QwtWheel::valueChange(), QwtSlider::valueChange(), and QwtDial::valueChange().

Notify a change of value.

In the default setting (tracking enabled), this signal will be emitted every time the value changes ( see setTracking() ).

Parameters: value new value

Referenced by valueChange().

Qt wheel event.

Definition at line 304 of file qwt_sldbase.cpp.

References getScrollMode(), QwtDblRange::incPages(), isReadOnly(), isValid(), QwtDblRange::prevValue(), sliderMoved(), and QwtDblRange::value().