typedef SoCallbackAction::Response SoIntersectionVisitationCB (void *closure, const SoPath *where)

typedef SbBool SoIntersectionFilterCB (void *closure, const SoPath *p1, const SoPath *p2)

typedef Resp SoIntersectionCB (void *closure, const SoIntersectingPrimitive *p1, const SoIntersectingPrimitive *p2)

enum Resp { NEXT_PRIMITIVE, NEXT_SHAPE, ABORT }

virtual SoType getTypeId (void) const

void setIntersectionDetectionEpsilon (float epsilon)

float getIntersectionDetectionEpsilon (void) const

void setTypeEnabled (SoType type, SbBool enable)

SbBool isTypeEnabled (SoType type, SbBool checkgroups=0) const

void setManipsEnabled (SbBool enable)

SbBool isManipsEnabled (void) const

void setDraggersEnabled (SbBool enable)

SbBool isDraggersEnabled (void) const

void setShapeInternalsEnabled (SbBool enable)

SbBool isShapeInternalsEnabled (void) const

void addVisitationCallback (SoType type, SoIntersectionVisitationCB *cb, void *closure)

void removeVisitationCallback (SoType type, SoIntersectionVisitationCB *cb, void *closure)

virtual void apply (SoNode *node)

virtual void apply (SoPath *path)

virtual void apply (const SoPathList &paths, SbBool obeysRules=0)

virtual void setFilterCallback (SoIntersectionFilterCB *cb, void *closure=NULL)

virtual void addIntersectionCallback (SoIntersectionCB *cb, void *closure=NULL)

virtual void removeIntersectionCallback (SoIntersectionCB *cb, void *closure=NULL)

static SoType getClassTypeId (void)

static void addMethod (const SoType type, SoActionMethod method)

static void enableElement (const SoType type, const int stackindex)

static void initClass (void)

static void setIntersectionEpsilon (float epsilon)

static float getIntersectionEpsilon (void)

virtual const SoEnabledElementsList & getEnabledElements (void) const

static SoEnabledElementsList * getClassEnabledElements (void)

static SoActionMethodList * getClassActionMethods (void)

Returns the type identification of an action derived from a class inheriting SoAction. This is used for run-time type checking and 'downward' casting.

Usage example:

  void bar(SoAction * action)
  {
    if (action->getTypeId() == SoGLRenderAction::getClassTypeId()) {
      // safe downward cast, know the type
      SoGLRenderAction * glrender = (SoGLRenderAction *)action;
    }
    return; // ignore if not renderaction
  }

For application programmers wanting to extend the library with new actions: this method needs to be overridden in all subclasses. This is typically done as part of setting up the full type system for extension classes, which is usually accomplished by using the pre-defined macros available through Inventor/nodes/SoSubAction.h: SO_ACTION_SOURCE, SO_ACTION_INIT_CLASS and SO_ACTION_CONSTRUCTOR.

For more information on writing Coin extensions, see the SoAction class documentation.

Implements SoAction.

Returns the run-time type object associated with instances of this class.

Reimplemented from SoAction.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

Returns a list of the elements used by action instances of this class upon traversal operations.

Reimplemented from SoAction.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This method not available in the original OIV API, see SoSubAction.h for explanation.

Reimplemented from SoAction.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This method not available in the original OIV API, see SoSubAction.h for explanation.

Reimplemented from SoAction.

Initializes the run-time type system for this class, and sets up the enabled elements and action method list.

Reimplemented from SoAction.

Sets the intersection detection distance epsilon value for the action object. This overrides the global value.

See also SoIntersectionDetectionAction::setIntersectionEpsilon() for important information about how this setting influences performance.

Returns the set intersection detection distance epsilon value for the action object.

Sets the global intersection detection distance epsilon value.

This makes primitives within the epsilon distance be considered to intersect each other.

This will affect all intersection detection action objects in use that don't have a locally set value.

The epsilon value is a worldspace value.

Be aware that increasing the epsilon value can dramatically increase the number of primitive intersection tests being done to decide intersections. Increasing the epsilon value can therefore cause serious slow-downs in the running time of the intersections checks.

Returns the globally set intersection detection distance epsilon value.

Sets whether nodes of specific types (including derived objects) should be tested for intersection or not.

See also: isTypeEnabled(), setManipsEnabled(), setDraggersEnabled()

Returns whether nodes of specific types are enabled or not. The checkgroups argument can be set to TRUE if you wan't the return value to reflect whether the node will be implicit enabled/disabled through the settings controlled by the setManipsEnabled() and setDraggersEnabled() functions.

The default is that all node types are enabled.

Note that derivation checks are not performed - the type needs to be the exact same type as has been disabled with setTypeEnabled()

See also: setTypeEnabled()

Sets whether manipulators in the scene graph should be tested for intersection with other geometry or not.

Note that when draggers are disabled with setDraggersEnabled(), this setting has no effect - manipulators are disabled too.

See also: isManipsEnabled(), setDraggersEnabled(), setTypeEnabled()

Returns whether the actions is set up to test intersection on manipulators in the scene or not.

Note that when draggers are disabled with setDraggersEnabled(), this setting has no effect - manipulators are disabled too.

The default is that manipulators are enabled for intersection testing with other geometry in the scene.

See also: setManipsEnabled()

Sets whether draggers in the scene graph should be tested for intersection with other geometry or not.

Note that when you disable draggers, manipulators are also automatically disabled, although the isManipsDisabled() setting might reflect otherwise.

See also: isDraggersEnabled(), setManipsEnabled(), setTypeEnabled()

Returns whether the actions is set up to test intersection on draggers in the scene or not.

The default is that draggers are enabled for intersection testing with other geometry in the scene.

See also: setDraggersEnabled()

Sets whether nodes in the scene graph should be checked for intersecting primitives within themselves.

Default is FALSE.

See also: isShapeInternalsEnabled()

Returns whether nodes in the scene graph will be checked for intersecting primitives within themselves.

The default value for this setting is FALSE.

See also: setShapeInternalsEnabled()

The scene graph traversal can be controlled with callbacks which you set with this method. Use just like you would use SoCallbackAction::addPreCallback().

See also: SoCallbackAction::addPreCallback()

The scene graph traversal can be controlled with callbacks which you remove with this method. Use just like you would use SoCallbackAction::removePreCallback().

See also: SoCallbackAction::removePreCallback()

Applies the action to the scene graph rooted at root.

Note that you should not apply an action to a node with a zero reference count. The behavior in that case is undefined.

Reimplemented from SoAction.

Applies the action to the parts of the graph defined by path.

If the path ends in an SoGroup node, the action will also traverse the tail node's children.

Reimplemented from SoAction.

Applies action to the graphs defined by pathlist. If obeysrules is set to TRUE, pathlist must obey the following four conditions (which is the case for path lists returned from search actions for non-group nodes and path lists returned from picking actions):

All paths must start at the same head node. All paths must be sorted in traversal order. The paths must be unique. No path can continue through the end point of another path.

Reimplemented from SoAction.

This callback is called when two shapes are found to have intersecting bounding boxes, and are about to be checked for real intersection between their primitives.

When intersection epsilon values are in use, bounding box intersection testing is done approximately and will trigger the filter callback on boxes that are further from each other than the epsilon length.

If the callback returns TRUE, the intersection test will be performed. If the callback returns FALSE, the intersection testing will be skipped.

The API allows only one filter callback.

Adds a callback to be called when two intersecting primitives are found in the scene.

If the callback returns ABORT, the intersection detection is aborted. If the callback returns NEXT_SHAPE, the intersection detection between these two shapes are aborted and the action continues checking other shapes. If the callback returns NEXT_PRIMITIVE, the intersection detection testing continues checking the other primitives in these two shapes.

See also: removeIntersectionCallback()

Removes a callback set with addIntersectionCallback().

See also: addIntersectionCallback()