virtual SoType getTypeId (void) const

virtual const SoNodekitCatalog * getNodekitCatalog (void) const

SoTrackballDragger (void)

SbBool isAnimationEnabled (void)

void setAnimationEnabled (SbBool newval)

static SoType getClassTypeId (void)

static const SoNodekitCatalog * getClassNodekitCatalog (void)

static void initClass (void)

SoSFRotation rotation

SoSFVec3f scaleFactor

virtual const SoFieldData * getFieldData (void) const

~SoTrackballDragger ()

virtual SbBool setUpConnections (SbBool onoff, SbBool doitalways=0)

virtual void setDefaultOnNonWritingFields (void)

void dragStart (void)

void drag (void)

void dragFinish (void)

void setAllPartsActive (SbBool onoroff)

static const SoFieldData ** getFieldDataPtr (void)

static const SoNodekitCatalog ** getClassNodekitCatalogPtr (void)

static void startCB (void *f, SoDragger *d)

static void motionCB (void *f, SoDragger *d)

static void finishCB (void *f, SoDragger *d)

static void metaKeyChangeCB (void *f, SoDragger *d)

static void fieldSensorCB (void *f, SoSensor *s)

static void valueChangedCB (void *f, SoDragger *d)

SoSFNode XRotator

SoSFNode XRotatorActive

SoSFNode XRotatorSwitch

SoSFNode YRotator

SoSFNode YRotatorActive

SoSFNode YRotatorSwitch

SoSFNode ZRotator

SoSFNode ZRotatorActive

SoSFNode ZRotatorSwitch

SoSFNode antiSquish

SoSFNode rotator

SoSFNode rotatorActive

SoSFNode rotatorSwitch

SoSFNode surroundScale

SoSFNode userAxis

SoSFNode userAxisActive

SoSFNode userAxisRotation

SoSFNode userAxisSwitch

SoSFNode userRotator

SoSFNode userRotatorActive

SoSFNode userRotatorSwitch

SoFieldSensor * rotFieldSensor

SoFieldSensor * scaleFieldSensor

class SoTrackballDraggerP

Default constructor, sets up the dragger nodekit catalog with the interaction and feedback geometry.

Node kit structure (new entries versus parent class marked with arrow prefix):

  CLASS SoTrackballDragger
  -->"this"
        "callbackList"
        "topSeparator"
           "motionMatrix"
  -->      "surroundScale"
  -->      "antiSquish"
           "geomSeparator"
  -->         "rotatorSwitch"
  -->            "rotator"
  -->            "rotatorActive"
  -->         "XRotatorSwitch"
  -->            "XRotator"
  -->            "XRotatorActive"
  -->         "YRotatorSwitch"
  -->            "YRotator"
  -->            "YRotatorActive"
  -->         "ZRotatorSwitch"
  -->            "ZRotator"
  -->            "ZRotatorActive"
  -->         "userAxisRotation"
  -->         "userAxisSwitch"
  -->            "userAxis"
  -->            "userAxisActive"
  -->         "userRotatorSwitch"
  -->            "userRotator"
  -->            "userRotatorActive"
  .fi


(See SoBaseKit::printDiagram() for information about the output formatting.)

Detailed information on catalog parts:


  CLASS SoTrackballDragger
  PVT   "this",  SoTrackballDragger  --- 
        "callbackList",  SoNodeKitListPart [ SoCallback, SoEventCallback ] 
  PVT   "topSeparator",  SoSeparator  --- 
  PVT   "motionMatrix",  SoMatrixTransform  --- 
        "surroundScale",  SoSurroundScale  --- 
        "antiSquish",  SoAntiSquish  --- 
  PVT   "geomSeparator",  SoSeparator  --- 
  PVT   "rotatorSwitch",  SoSwitch  --- 
        "rotator",  SoSeparator  --- 
        "rotatorActive",  SoSeparator  --- 
  PVT   "XRotatorSwitch",  SoSwitch  --- 
        "XRotator",  SoSeparator  --- 
        "XRotatorActive",  SoSeparator  --- 
  PVT   "YRotatorSwitch",  SoSwitch  --- 
        "YRotator",  SoSeparator  --- 
        "YRotatorActive",  SoSeparator  --- 
  PVT   "ZRotatorSwitch",  SoSwitch  --- 
        "ZRotator",  SoSeparator  --- 
        "ZRotatorActive",  SoSeparator  --- 
  PVT   "userAxisRotation",  SoRotation  --- 
  PVT   "userAxisSwitch",  SoSwitch  --- 
        "userAxis",  SoSeparator  --- 
        "userAxisActive",  SoSeparator  --- 
  PVT   "userRotatorSwitch",  SoSwitch  --- 
        "userRotator",  SoSeparator  --- 
        "userRotatorActive",  SoSeparator  --- 
  .fi


(See SoBaseKit::printTable() for information about the output formatting.) 

Protected destructor.

(Dragger classes are derived from SoBase, so they are reference counted and automatically destroyed when their reference count goes to 0.)

This static method returns the SoType object associated with objects of this class.

Reimplemented from SoDragger.

Returns the type identification of an object derived from a class inheriting SoBase. This is used for run-time type checking and 'downward' casting.

Usage example:

  void foo(SoNode * node)
  {
    if (node->getTypeId() == SoFile::getClassTypeId()) {
      SoFile * filenode = (SoFile *)node;  // safe downward cast, knows the type
    }
    else if (node->getTypeId().isOfType(SoGroup::getClassTypeId())) {
      SoGroup * group = (SoGroup *)node;  // safe downward cast, knows the type
    }
  }

For application programmers wanting to extend the library with new nodes, engines, nodekits, draggers or others: this method needs to be overridden in all subclasses. This is typically done as part of setting up the full type system for extension classes, which is usually accomplished by using the pre-defined macros available through for instance Inventor/nodes/SoSubNode.h (SO_NODE_INIT_CLASS and SO_NODE_CONSTRUCTOR for node classes), Inventor/engines/SoSubEngine.h (for engine classes) and so on.

For more information on writing Coin extensions, see the class documentation of the toplevel superclasses for the various class groups.

Reimplemented from SoDragger.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

Reimplemented from SoDragger.

Returns a pointer to the class-wide field data storage object for this instance. If no fields are present, returns NULL.

Reimplemented from SoDragger.

Returns the nodekit catalog which defines the layout of this class' kit.

Reimplemented from SoDragger.

Returns the nodekit catalog which defines the layout of this class' kit.

Reimplemented from SoDragger.

Returns the pointer to the pointer of the nodekit catalog for this class.

Reimplemented from SoDragger.

Initializes type system for this dragger class.

Application programmers should usually not have to invoke this method, see documentation of SoInteraction::init().

Reimplemented from SoDragger.

Whether or not the trackball will start a spin animation after a quick drag-and-release.

Note: this feature is not supported yet in the Coin library, so even though if TRUE is returned, spin animations will not be possible to trigger.

Set a flag which will decide whether or not the trackball will start a spin animation after a quick drag-and-release.

Note: this feature is not supported yet in the Coin library.

Sets up all internal connections for instances of this class.

(This method will usually not be of interest to the application programmer, unless you want to extend the library with new custom nodekits or dragger classes. If so, see the SoBaseKit class documentation.)

Reimplemented from SoInteractionKit.

(Be aware that this method is unlikely to be of interest to the application programmer who does not want to extend the library with new custom nodekits or draggers. If you indeed are writing extensions, see the information in the SoBaseKit class documentation.)

This is a virtual method, and the code in it should call SoField::setDefault() with argument TRUE on part fields that should not be written upon scenegraph export operations.

This is typically done when:

1.

field value is NULL and part is NULL by default

2.

it is a leaf SoGroup or SoSeparator node with no children

3.

it is a leaf listpart with no children and an SoGroup or SoSeparator container

4.

it is a non-leaf part and it's of SoGroup type and all fields are at their default values

Subclasses should usually override this to do additional settings for new member fields. From the subclass, do remember to call 'upwards' to your superclass' setDefaultOnNonWritingFields() method.

Reimplemented from SoDragger.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer. Called when dragger is selected (picked) by the user.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer. Called when user drags the mouse after picking the dragger.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer. Called when mouse button is released after picking and interacting with the dragger.

If the input argument is TRUE, all the geometry parts of the dragger will become highligthed, as when active.

Used internally during scaling operations and free-form rotations.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

Reimplemented from SoInteractionKit.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This field is continuously updated to contain the rotation of the dragger's trackball.

Continuously updated to contain the current vector of scaling along the X, Y and Z axes. The three components will always be equal, as this dragger only supports uniform scale operations.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.

This API member is considered internal to the library, as it is not likely to be of interest to the application programmer.